kopia lustrzana https://github.com/jgromes/RadioLib
72 wiersze
2.4 KiB
C++
72 wiersze
2.4 KiB
C++
/*
|
|
RadioLib LoRaWAN ABP Example
|
|
|
|
ABP = Activation by Personalisation, an alternative
|
|
to OTAA (Over the Air Activation). OTAA is preferable.
|
|
|
|
This example will send uplink packets to a LoRaWAN network.
|
|
Before you start, you will have to register your device at
|
|
https://www.thethingsnetwork.org/
|
|
After your device is registered, you can run this example.
|
|
The device will join the network and start uploading data.
|
|
|
|
LoRaWAN v1.1 requires the use of persistent storage.
|
|
As this example does not use persistent storage, running this
|
|
examples REQUIRES you to check "Resets frame counters"
|
|
on your LoRaWAN dashboard. Refer to the notes or the
|
|
network's documentation on how to do this.
|
|
To comply with LoRaWAN v1.1's persistent storage, refer to
|
|
https://github.com/radiolib-org/radiolib-persistence
|
|
|
|
For default module settings, see the wiki page
|
|
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
|
|
|
For full API reference, see the GitHub Pages
|
|
https://jgromes.github.io/RadioLib/
|
|
|
|
For LoRaWAN details, see the wiki page
|
|
https://github.com/jgromes/RadioLib/wiki/LoRaWAN
|
|
|
|
*/
|
|
|
|
#include "configABP.h"
|
|
|
|
void setup() {
|
|
Serial.begin(115200);
|
|
while (!Serial);
|
|
delay(5000); // Give time to switch to the serial monitor
|
|
Serial.println(F("\nSetup ... "));
|
|
|
|
Serial.println(F("Initalise the radio"));
|
|
int state = radio.begin();
|
|
debug(state != RADIOLIB_ERR_NONE, F("Initalise radio failed"), state, true);
|
|
|
|
Serial.println(F("Initalise LoRaWAN Network credentials"));
|
|
state = node.beginABP(devAddr, NwkSEncKey, AppSKey, NwkSKey, SNwkSIntKey, true);
|
|
debug(state < RADIOLIB_ERR_NONE, F("Session setup failed"), state, true);
|
|
|
|
Serial.println(F("Ready!\n"));
|
|
}
|
|
|
|
|
|
void loop() {
|
|
Serial.println(F("Sending uplink"));
|
|
|
|
// Read some inputs
|
|
uint8_t Digital1 = digitalRead(2);
|
|
uint16_t Analog1 = analogRead(3);
|
|
|
|
// Build payload byte array
|
|
uint8_t uplinkPayload[3];
|
|
uplinkPayload[0] = Digital1;
|
|
uplinkPayload[1] = highByte(Analog1); // See notes for high/lowByte functions
|
|
uplinkPayload[2] = lowByte(Analog1);
|
|
|
|
// Perform an uplink
|
|
int state = node.sendReceive(uplinkPayload, sizeof(uplinkPayload));
|
|
debug((state != RADIOLIB_LORAWAN_NO_DOWNLINK) && (state != RADIOLIB_ERR_NONE), F("Error in sendReceive"), state, false);
|
|
|
|
// Wait until next uplink - observing legal & TTN FUP constraints
|
|
delay(uplinkIntervalSeconds * 1000UL);
|
|
}
|