mirror
/
RadioLib
kopia lustrzana https://github.com/jgromes/RadioLib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Typo fixes

pull/801/head
jgromes 2023-07-15 19:13:16 +02:00
rodzic 5974da27de
commit 8fd0a67a78
16 zmienionych plików z 60 dodań i 55 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

2
src/BuildOpt.h
Wyświetl plik

@ -348,7 +348,7 @@
/*
* Uncomment to enable "paranoid" SPI mode
* Every write to an SPI register using SPI set function will be verified by a subsequent read operation.
* This improves reliablility, but slightly slows down communication.
* This improves reliability, but slightly slows down communication.
* Note: Enabled by default.
*/
#if !defined(RADIOLIB_SPI_PARANOID)

13
src/Hal.h
Wyświetl plik

@ -193,13 +193,13 @@ class RadioLibHal {
/*!
\brief Module initialization method.
This will be called by all radio modules at the beginning of startup.
Can be used to e.g., initalize SPI interface.
Can be used to e.g., initialize SPI interface.
*/
virtual void init();
/*!
\brief Module termination method.
This will be called by all radio modules when the desctructor is called.
This will be called by all radio modules when the destructor is called.
Can be used to e.g., stop SPI interface.
*/
virtual void term();
@ -251,7 +251,12 @@ class RadioLibHal {
Will write at most RADIOLIB_HAL_PERSISTENT_STORAGE_SIZE bytes.
*/
void wipePersistentStorage();
/*!
\brief Method to convert from persistent parameter ID to its physical address.
\param id Parameter ID.
\returns Parameter physical address.
*/
uint32_t getPersistentAddr(uint32_t id);
/*!
@ -269,7 +274,7 @@ class RadioLibHal {
This method DOES NOT perform any endianness conversion, so the value
will be retrieved in the system endian!
\param id Parameter ID to load from.
\returns The lodaded value.
\returns The loaded value.
*/
template<typename T>
T getPersistentParameter(uint32_t id);

8
src/Module.h
Wyświetl plik

@ -256,8 +256,8 @@ class Module {
\brief SPI single transfer method.
\param cmd SPI access command (read/write/burst/...).
\param reg Address of SPI register to transfer to/from.
\param dataOut Data that will be transfered from master to slave.
\param dataIn Data that was transfered from slave to master.
\param dataOut Data that will be transferred from master to slave.
\param dataIn Data that was transferred from slave to master.
\param numBytes Number of bytes to transfer.
*/
void SPItransfer(uint8_t cmd, uint16_t reg, uint8_t* dataOut, uint8_t* dataIn, size_t numBytes);
@ -319,8 +319,8 @@ class Module {
\param cmd SPI operation command.
\param cmdLen SPI command length in bytes.
\param write Set to true for write commands, false for read commands.
\param dataOut Data that will be transfered from master to slave.
\param dataIn Data that was transfered from slave to master.
\param dataOut Data that will be transferred from master to slave.
\param dataIn Data that was transferred from slave to master.
\param numBytes Number of bytes to transfer.
\param waitForGpio Whether to wait for some GPIO at the end of transfer (e.g. BUSY line on SX126x/SX128x).
\param timeout GPIO wait period timeout in milliseconds.

10
src/TypeDef.h
Wyświetl plik

@ -17,22 +17,22 @@
#define RADIOLIB_SHAPING_NONE (0x00)
/*!
\brief Gaussin shaping filter, BT = 0.3
\brief Gaussian shaping filter, BT = 0.3
*/
#define RADIOLIB_SHAPING_0_3 (0x01)
/*!
\brief Gaussin shaping filter, BT = 0.5
\brief Gaussian shaping filter, BT = 0.5
*/
#define RADIOLIB_SHAPING_0_5 (0x02)
/*!
\brief Gaussin shaping filter, BT = 0.7
\brief Gaussian shaping filter, BT = 0.7
*/
#define RADIOLIB_SHAPING_0_7 (0x03)
/*!
\brief Gaussin shaping filter, BT = 1.0
\brief Gaussian shaping filter, BT = 1.0
*/
#define RADIOLIB_SHAPING_1_0 (0x04)
@ -310,7 +310,7 @@
#define RADIOLIB_ERR_INVALID_MIC_E_TELEMETRY_LENGTH (-203)
/*!
\brief Mic-E message cannot contaion both telemetry and status text.
\brief Mic-E message cannot contain both telemetry and status text.
*/
#define RADIOLIB_ERR_MIC_E_TELEMETRY_STATUS (-204)

8
src/modules/RF69/RF69.h
Wyświetl plik

@ -124,7 +124,7 @@
// RADIOLIB_RF69_REG_BITRATE_MSB + REG_BITRATE_LSB
#define RADIOLIB_RF69_BITRATE_MSB 0x1A // 7 0 bit rate setting: rate = F(XOSC) / BITRATE
#define RADIOLIB_RF69_BITRATE_LSB 0x0B // 7 0 default value: 4.8 kbps 0x40 // 7 0
#define RADIOLIB_RF69_BITRATE_LSB 0x0B // 7 0 default value: 4.8 kbps
// RADIOLIB_RF69_REG_FDEV_MSB + REG_FDEV_LSB
#define RADIOLIB_RF69_FDEV_MSB 0x00 // 5 0 frequency deviation: f_dev = f_step * FDEV
@ -671,7 +671,7 @@ class RF69: public PhysicalLayer {
bool fifoAdd(uint8_t* data, int totalLen, int* remLen);
/*!
\brief Set interrupt service routine function to call when FIFO is sufficently full to read.
\brief Set interrupt service routine function to call when FIFO is sufficiently full to read.
\param data Pointer to a buffer that stores the receive data.
\param totalLen Total number of bytes to receive.
\param rcvLen Pointer to a counter holding the number of bytes that have been received so far.
@ -714,7 +714,7 @@ class RF69: public PhysicalLayer {
/*!
\brief Reads data received after calling startReceive method.
\param data Pointer to array to save the received binary data.
\param len Number of bytes that will be read. When set to 0, the packet length will be retreived automatically.
\param len Number of bytes that will be read. When set to 0, the packet length will be retrieved automatically.
When more bytes than received are requested, only the number of bytes requested will be returned.
\returns \ref status_codes
*/
@ -974,7 +974,7 @@ class RF69: public PhysicalLayer {
#if !defined(RADIOLIB_EXCLUDE_DIRECT_RECEIVE)
/*!
\brief Set interrupt service routine function to call when data bit is receveid in direct mode.
\brief Set interrupt service routine function to call when data bit is received in direct mode.
\param func Pointer to interrupt service routine.
*/
void setDirectAction(void (*func)(void));

2
src/modules/SX126x/STM32WLx.h
Wyświetl plik

@ -81,7 +81,7 @@ class STM32WLx : public SX1262 {
This automatically switches between the low-power (LP) and high-power (HP) amplifier.
LP is preferred and supports -17 to +14dBm. When a higher power is
requested (or the LP amplifier is marked as unvailable using
requested (or the LP amplifier is marked as unavailable using
setRfSwitchTable()), HP is used, which supports -9 to +22dBm.
\param power Output power to be set in dBm.

10
src/modules/SX126x/SX126x.h
Wyświetl plik

@ -35,10 +35,10 @@
#define RADIOLIB_SX126X_CMD_SET_RX_TX_FALLBACK_MODE 0x93
// register and buffer access commands
#define RADIOLIB_SX126X_CMD_WRITE_REGISTER 0x0D
#define RADIOLIB_SX126X_CMD_READ_REGISTER 0x1D
#define RADIOLIB_SX126X_CMD_WRITE_BUFFER 0x0E
#define RADIOLIB_SX126X_CMD_READ_BUFFER 0x1E
#define RADIOLIB_SX126X_CMD_WRITE_REGISTER 0x0D
#define RADIOLIB_SX126X_CMD_READ_REGISTER 0x1D
#define RADIOLIB_SX126X_CMD_WRITE_BUFFER 0x0E
#define RADIOLIB_SX126X_CMD_READ_BUFFER 0x1E
// DIO and IRQ control
#define RADIOLIB_SX126X_CMD_SET_DIO_IRQ_PARAMS 0x08
@ -673,7 +673,7 @@ class SX126x: public PhysicalLayer {
/*!
\brief Reads data received after calling startReceive method.
\param data Pointer to array to save the received binary data.
\param len Number of bytes that will be read. When set to 0, the packet length will be retreived automatically.
\param len Number of bytes that will be read. When set to 0, the packet length will be retrieved automatically.
When more bytes than received are requested, only the number of bytes requested will be returned.
\returns \ref status_codes
*/

8
src/modules/SX127x/SX127x.h
Wyświetl plik

@ -770,7 +770,7 @@ class SX127x: public PhysicalLayer {
bool fifoAdd(uint8_t* data, int totalLen, int* remLen);
/*!
\brief Set interrupt service routine function to call when FIFO is sufficently full to read.
\brief Set interrupt service routine function to call when FIFO is sufficiently full to read.
\param data Pointer to a buffer that stores the receive data.
\param totalLen Total number of bytes to receive.
\param rcvLen Pointer to a counter holding the number of bytes that have been received so far.
@ -822,7 +822,7 @@ class SX127x: public PhysicalLayer {
/*!
\brief Reads data that was received after calling startReceive method. This method reads len characters.
\param data Pointer to array to save the received binary data.
\param len Number of bytes that will be read. When set to 0, the packet length will be retreived automatically.
\param len Number of bytes that will be read. When set to 0, the packet length will be retrieved automatically.
When more bytes than received are requested, only the number of bytes requested will be returned.
\returns \ref status_codes
*/
@ -1093,7 +1093,7 @@ class SX127x: public PhysicalLayer {
#if !defined(RADIOLIB_EXCLUDE_DIRECT_RECEIVE)
/*!
\brief Set interrupt service routine function to call when data bit is receveid in direct mode.
\brief Set interrupt service routine function to call when data bit is received in direct mode.
\param func Pointer to interrupt service routine.
*/
void setDirectAction(void (*func)(void));
@ -1202,7 +1202,7 @@ class SX127x: public PhysicalLayer {
/*!
\brief Calculate exponent and mantissa values for receiver bandwidth and AFC
\param bandwidth bandwidth to be set (in kHz).
\returns bandwidth in manitsa and exponent format
\returns bandwidth in mantissa and exponent format
*/
static uint8_t calculateBWManExp(float bandwidth);

2
src/modules/SX128x/SX128x.h
Wyświetl plik

@ -564,7 +564,7 @@ class SX128x: public PhysicalLayer {
/*!
\brief Reads data received after calling startReceive method.
\param data Pointer to array to save the received binary data.
\param len Number of bytes that will be read. When set to 0, the packet length will be retreived automatically.
\param len Number of bytes that will be read. When set to 0, the packet length will be retrieved automatically.
When more bytes than received are requested, only the number of bytes requested will be returned.
\returns \ref status_codes
*/

4
src/modules/Si443x/Si443x.h
Wyświetl plik

@ -712,7 +712,7 @@ class Si443x: public PhysicalLayer {
/*!
\brief Reads data that was received after calling startReceive method. This method reads len characters.
\param data Pointer to array to save the received binary data.
\param len Number of bytes that will be read. When set to 0, the packet length will be retreived automatically.
\param len Number of bytes that will be read. When set to 0, the packet length will be retrieved automatically.
When more bytes than received are requested, only the number of bytes requested will be returned.
\returns \ref status_codes
*/
@ -798,7 +798,7 @@ class Si443x: public PhysicalLayer {
#if !defined(RADIOLIB_EXCLUDE_DIRECT_RECEIVE)
/*!
\brief Set interrupt service routine function to call when data bit is receveid in direct mode.
\brief Set interrupt service routine function to call when data bit is received in direct mode.
\param func Pointer to interrupt service routine.
*/
void setDirectAction(void (*func)(void));

6
src/protocols/LoRaWAN/LoRaWAN.h
Wyświetl plik

@ -165,10 +165,10 @@ struct LoRaWANChannelSpan_t {
\brief Structure to save information about LoRaWAN band
*/
struct LoRaWANBand_t {
/*! \brief The base downlik data rate. Used to calculate data rate changes for adaptive data rate */
/*! \brief The base downlink data rate. Used to calculate data rate changes for adaptive data rate */
uint8_t downlinkDataRateBase;
/*! \brief The minimum allowed downlik data rate. Used to calculate data rate changes for adaptive data rate */
/*! \brief The minimum allowed downlink data rate. Used to calculate data rate changes for adaptive data rate */
uint8_t downlinkDataRateMin;
/*! \brief Array of allowed maximum payload lengths for each data rate */
@ -326,7 +326,7 @@ class LoRaWANNode {
template<typename T>
static T ntoh(uint8_t* buff, size_t size = 0);
// host-to-network conversion method - takes data from host variable and and converts it to network packet endiands
// host-to-network conversion method - takes data from host variable and and converts it to network packet endians
template<typename T>
static void hton(uint8_t* buff, T val, size_t size = 0);
};

28
src/protocols/Morse/Morse.h
Wyświetl plik

@ -9,7 +9,7 @@
#define RADIOLIB_MORSE_DOT 0b0
#define RADIOLIB_MORSE_DASH 0b1
#define RADIOLIB_MORSE_GUARDBIT 0b1
#define RADIOLIB_MORSE_UNSUPORTED 0xFF
#define RADIOLIB_MORSE_UNSUPPORTED 0xFF
#define RADIOLIB_MORSE_ASCII_OFFSET 32
#define RADIOLIB_MORSE_INTER_SYMBOL 0x00
#define RADIOLIB_MORSE_CHAR_COMPLETE 0x01
@ -18,19 +18,19 @@
// Morse character table: - using codes defined in ITU-R M.1677-1
// - Morse code representation is saved LSb first, using additional bit as guard
// - position in array corresponds ASCII code minus RADIOLIB_MORSE_ASCII_OFFSET
// - ASCII characters marked RADIOLIB_MORSE_UNSUPORTED do not have ITU-R M.1677-1 equivalent
// - ASCII characters marked RADIOLIB_MORSE_UNSUPPORTED do not have ITU-R M.1677-1 equivalent
static const uint8_t MorseTable[] RADIOLIB_NONVOLATILE = {
0b00, // space
0b110101, // ! (unsupported)
0b1010010, // "
RADIOLIB_MORSE_UNSUPORTED, // # (unsupported)
RADIOLIB_MORSE_UNSUPORTED, // $ (unsupported)
RADIOLIB_MORSE_UNSUPORTED, // % (unsupported)
RADIOLIB_MORSE_UNSUPORTED, // & (unsupported)
RADIOLIB_MORSE_UNSUPPORTED, // # (unsupported)
RADIOLIB_MORSE_UNSUPPORTED, // $ (unsupported)
RADIOLIB_MORSE_UNSUPPORTED, // % (unsupported)
RADIOLIB_MORSE_UNSUPPORTED, // & (unsupported)
0b1011110, // '
0b101101, // (
0b1101101, // )
RADIOLIB_MORSE_UNSUPORTED, // * (unsupported)
RADIOLIB_MORSE_UNSUPPORTED, // * (unsupported)
0b101010, // +
0b1110011, // ,
0b1100001, // -
@ -47,10 +47,10 @@ static const uint8_t MorseTable[] RADIOLIB_NONVOLATILE = {
0b100111, // 8
0b101111, // 9
0b1000111, // :
RADIOLIB_MORSE_UNSUPORTED, // ; (unsupported)
RADIOLIB_MORSE_UNSUPORTED, // < (unsupported)
RADIOLIB_MORSE_UNSUPPORTED, // ; (unsupported)
RADIOLIB_MORSE_UNSUPPORTED, // < (unsupported)
0b110001, // =
RADIOLIB_MORSE_UNSUPORTED, // > (unsupported)
RADIOLIB_MORSE_UNSUPPORTED, // > (unsupported)
0b1001100, // ?
0b1010110, // @
0b110, // A
@ -79,9 +79,9 @@ static const uint8_t MorseTable[] RADIOLIB_NONVOLATILE = {
0b11001, // X
0b11101, // Y
0b10011, // Z
RADIOLIB_MORSE_UNSUPORTED, // [ (unsupported)
RADIOLIB_MORSE_UNSUPORTED, // \ (unsupported)
RADIOLIB_MORSE_UNSUPORTED, // ] (unsupported)
RADIOLIB_MORSE_UNSUPPORTED, // [ (unsupported)
RADIOLIB_MORSE_UNSUPPORTED, // \ (unsupported)
RADIOLIB_MORSE_UNSUPPORTED, // ] (unsupported)
0b1101000, // ^ (unsupported, used as alias for end of work)
0b110101 // _ (unsupported, used as alias for starting signal)
};
@ -124,7 +124,7 @@ class MorseClient: public RadioLibPrint {
/*!
\brief Decode Morse symbol to ASCII.
\param symbol Morse code symbol, respresented as outlined in MorseTable.
\param symbol Morse code symbol, represented as outlined in MorseTable.
\param len Symbol length (number of dots and dashes).
\returns ASCII character matching the symbol, or 0xFF if no match is found.
*/

4
src/protocols/Pager/Pager.h
Wyświetl plik

@ -140,7 +140,7 @@ class PagerClient {
/*!
\brief Reads data that was received after calling startReceive method.
\param str Address of Arduino String to save the received data.
\param len Expected number of characters in the message. When set to 0, the message lengthwill be retreived
\param len Expected number of characters in the message. When set to 0, the message length will be retrieved
automatically. When more bytes than received are requested, only the number of bytes requested will be returned.
\param addr Pointer to variable holding the address of the received pager message.
Set to NULL to not retrieve address.
@ -153,7 +153,7 @@ class PagerClient {
\brief Reads data that was received after calling startReceive method.
\param data Pointer to array to save the received message.
\param len Pointer to variable holding the number of bytes that will be read. When set to 0, the packet length
will be retreived automatically. When more bytes than received are requested, only the number of bytes
will be retrieved automatically. When more bytes than received are requested, only the number of bytes
requested will be returned. Upon completion, the number of bytes received will be written to this variable.
\param addr Pointer to variable holding the address of the received pager message.
Set to NULL to not retrieve address.

6
src/protocols/PhysicalLayer/PhysicalLayer.h
Wyświetl plik

@ -172,7 +172,7 @@ class PhysicalLayer {
/*!
\brief Reads data that was received after calling startReceive method.
\param str Address of Arduino String to save the received data.
\param len Expected number of characters in the message. When set to 0, the packet length will be retreived
\param len Expected number of characters in the message. When set to 0, the packet length will be retrieved
automatically. When more bytes than received are requested, only the number of bytes requested will be returned.
\returns \ref status_codes
*/
@ -182,7 +182,7 @@ class PhysicalLayer {
/*!
\brief Reads data that was received after calling startReceive method.
\param data Pointer to array to save the received binary data.
\param len Number of bytes that will be read. When set to 0, the packet length will be retreived automatically.
\param len Number of bytes that will be read. When set to 0, the packet length will be retrieved automatically.
When more bytes than received are requested, only the number of bytes requested will be returned.
\returns \ref status_codes
*/
@ -340,7 +340,7 @@ class PhysicalLayer {
int16_t setDirectSyncWord(uint32_t syncWord, uint8_t len);
/*!
\brief Set interrupt service routine function to call when data bit is receveid in direct mode.
\brief Set interrupt service routine function to call when data bit is received in direct mode.
Must be implemented in module class.
\param func Pointer to interrupt service routine.
*/

2
src/utils/CRC.h
Wyświetl plik

@ -54,7 +54,7 @@ class RadioLibCRC {
RadioLibCRC();
/*!
\brief Calcualte checksum of a buffer.
\brief Calculate checksum of a buffer.
\param buff Buffer to calculate the checksum over.
\param len Size of the buffer in bytes.
\returns The resulting checksum.

2
src/utils/Cryptography.h
Wyświetl plik

@ -136,7 +136,7 @@ class RadioLibAES128 {
void generateCMAC(uint8_t* in, size_t len, uint8_t* cmac);
/*!
\brief Verify the recevied CMAC. This just calculates the CMAC again and compares the results.
\brief Verify the received CMAC. This just calculates the CMAC again and compares the results.
\param in Input data (unpadded).
\param len Length of the input data.
\param cmac CMAC to verify.