mirror
/
RadioLib
kopia lustrzana https://github.com/jgromes/RadioLib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Update the reference version to latest LW code base

pull/995/head
Nick McCloud 2024-03-01 09:46:38 +00:00
rodzic 22045d7189
commit 7389d74e69
1 zmienionych plików z 75 dodań i 116 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

191
examples/LoRaWAN/LoRaWAN_End_Device_Reference/LoRaWAN_End_Device_Reference.ino
Wyświetl plik

@ -22,6 +22,9 @@
For full API reference, see the GitHub Pages
https://jgromes.github.io/RadioLib/
For LoRaWAN details, see the wiki page
https://github.com/jgromes/RadioLib/wiki/LoRaWAN
*/
// include the library
@ -29,11 +32,11 @@
// SX1262 has the following pin order:
// Module(NSS/CS, DIO1, RESET, BUSY)
// SX1262 radio = new Module(8, 14, 12, 13);
SX1262 radio = new Module(8, 14, 12, 13);
// SX1278 has the following pin order:
// Module(NSS/CS, DIO0, RESET, DIO1)
SX1278 radio = new Module(10, 2, 9, 3);
// SX1278 radio = new Module(10, 2, 9, 3);
// create the node instance on the EU-868 band
// using the radio module and the encryption key
@ -45,9 +48,8 @@ LoRaWANNode node(&radio, &EU868);
// such as US915 and AU915, you must specify
// the subband that matches the Frequency Plan
// that you selected on your LoRaWAN console
/*
LoRaWANNode node(&radio, &US915, 2);
*/
// LoRaWANNode node(&radio, &US915, 2);
void setup() {
Serial.begin(9600);
@ -63,43 +65,29 @@ void setup() {
while(true);
}
// application identifier - pre-LoRaWAN 1.1.0, this was called appEUI
// when adding new end device in TTN, you will have to enter this number
// you can pick any number you want, but it has to be unique
uint64_t joinEUI = 0x12AD1011B0C0FFEE;
// JoinEUI - previous versions of LoRaWAN this was AppEUI
// for development purposes you can use all zeros - see wiki for details
uint64_t joinEUI = 0x0000000000000000;
// device identifier - this number can be anything
// when adding new end device in TTN, you can generate this number,
// or you can set any value you want, provided it is also unique
uint64_t devEUI = 0x70B3D57ED005E120;
// DevEUI - The device's Extended Unique Identifier
// TTN will generate one for you
uint64_t devEUI = 0x----------------;
// select some encryption keys which will be used to secure the communication
// there are two of them - network key and application key
// because LoRaWAN uses AES-128, the key MUST be 16 bytes (or characters) long
// network key is the ASCII string "topSecretKey1234"
uint8_t nwkKey[] = { 0x74, 0x6F, 0x70, 0x53, 0x65, 0x63, 0x72, 0x65,
0x74, 0x4B, 0x65, 0x79, 0x31, 0x32, 0x33, 0x34 };
// application key is the ASCII string "aDifferentKeyABC"
uint8_t appKey[] = { 0x61, 0x44, 0x69, 0x66, 0x66, 0x65, 0x72, 0x65,
0x6E, 0x74, 0x4B, 0x65, 0x79, 0x41, 0x42, 0x43 };
// prior to LoRaWAN 1.1.0, only a single "nwkKey" is used
// when connecting to LoRaWAN 1.0 network, "appKey" will be disregarded
// and can be set to NULL
// encryption keys used to secure the communication
// TTN will generate them for you
// see wiki for details on copying & pasting them
uint8_t nwkKey[] = { 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--,
0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x-- };
uint8_t appKey[] = { 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--,
0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x-- };
// now we can start the activation
// this can take up to 10 seconds, and requires a LoRaWAN gateway in range
// a specific starting-datarate can be selected in dynamic bands (e.g. EU868):
/*
uint8_t joinDr = 4;
state = node.beginOTAA(joinEUI, devEUI, nwkKey, appKey, joinDr);
*/
// Override the default join rate
uint8_t joinDR = 3;
// Begin the join to the network
Serial.print(F("[LoRaWAN] Attempting over-the-air activation ... "));
state = node.beginOTAA(joinEUI, devEUI, nwkKey, appKey);
state = node.beginOTAA(joinEUI, devEUI, nwkKey, appKey, joinDR);
if(state >= RADIOLIB_ERR_NONE) {
Serial.println(F("success!"));
delay(2000); // small delay between joining and uplink
@ -112,51 +100,24 @@ void setup() {
Serial.print("[LoRaWAN] DevAddr: ");
Serial.println(node.getDevAddr(), HEX);
// on EEPROM-enabled boards, after the device has been activated,
// the session can be restored without rejoining after device power cycle
// this is intrinsically done when calling `beginOTAA()` with the same keys
// or if you 'lost' the keys or don't want them included in your sketch
// you can call `restore()`
/*
Serial.print(F("[LoRaWAN] Resuming previous session ... "));
state = node.restore();
if(state >= RADIOLIB_ERR_NONE) {
Serial.println(F("success!"));
} else {
Serial.print(F("failed, code "));
Serial.println(state);
while(true);
}
*/
// disable the ADR algorithm
// disable the ADR algorithm (on by default which is preferable)
node.setADR(false);
// set a fixed datarate
node.setDatarate(5);
// in order to set the datarate persistent across reboot/deepsleep, use the following:
/*
node.setDatarate(5, true);
*/
// set a fixed datarate & make it persistent (not normal)
node.setDatarate(5, true);
// enable CSMA
// this tries to minimize packet loss by searching for a free channel
// before actually sending an uplink
// enable CSMA which tries to minimize packet loss by searching
// for a free channel before actually sending an uplink
node.setCSMA(6, 2, true);
// enable or disable the dutycycle
// the second argument specific allowed airtime per hour in milliseconds
// 1250 = TTN FUP (30 seconds / 24 hours)
// if not called, this corresponds to setDutyCycle(true, 0)
// setting this to 0 corresponds to the band's maximum allowed dutycycle by law
node.setDutyCycle(true, 1250);
// manages uplink intervals to the TTN Fair Use Policy
node.setDutyCycle(true, 1250);
// enable or disable the dwell time limits
// the second argument specifies the allowed airtime per uplink in milliseconds
// unless specified, this argument is set to 0
// setting this to 0 corresponds to the band's maximum allowed dwell time by law
// enable the dwell time limits - 400ms is the limit for the US
node.setDwellTime(true, 400);
}
} // setup
void loop() {
int state = RADIOLIB_ERR_NONE;
@ -173,44 +134,45 @@ void loop() {
// retrieve the last uplink frame counter
uint32_t fcntUp = node.getFcntUp();
Serial.print(F("[LoRaWAN] Sending uplink packet ... "));
String strUp = "Hello!" + String(fcntUp);
Serial.print(F("[LoRaWAN] Sending uplink packet #"));
Serial.println(fcntUp);
String strUp = "Hello! " + String(fcntUp);
// send a confirmed uplink to port 10 every 64th frame
// and also request the LinkCheck and DeviceTime MAC commands
if(fcntUp % 64 == 0) {
Serial.print(F("[LoRaWAN] Requesting LinkCheck and DeviceTime"));
node.sendMacCommandReq(RADIOLIB_LORAWAN_MAC_LINK_CHECK);
node.sendMacCommandReq(RADIOLIB_LORAWAN_MAC_DEVICE_TIME);
state = node.uplink(strUp, 10, true);
} else {
state = node.uplink(strUp, 10);
}
if(state == RADIOLIB_ERR_NONE) {
Serial.println(F("success!"));
} else {
if(state != RADIOLIB_ERR_NONE) {
Serial.print(F("failed, code "));
Serial.println(state);
}
// after uplink, you can call downlink(),
// to receive any possible reply from the server
// this function must be called within a few seconds
// after uplink to receive the downlink!
Serial.print(F("[LoRaWAN] Waiting for downlink ... "));
// after uplink, you must call downlink() to receive any possible reply
// from the server. This function must be called before the Rx1 delay
// for the network. Typically this is 5s after end of uplink.
Serial.println(F("[LoRaWAN] Waiting for downlink ... "));
String strDown;
// you can also retrieve additional information about
// uplink or downlink by passing a reference to
// LoRaWANEvent_t structure
LoRaWANEvent_t event;
state = node.downlink(strDown, &event);
// you can also retrieve additional information about an uplink or
// downlink by passing a reference to LoRaWANEvent_t structure
LoRaWANEvent_t downlinkDetails;
state = node.downlink(strDown, &downlinkDetails);
if(state == RADIOLIB_ERR_NONE) {
Serial.println(F("success!"));
// print data of the packet (if there are any)
// print data of the packet
Serial.print(F("[LoRaWAN] Data:\t\t"));
if(strDown.length() > 0) {
Serial.println(strDown);
for (uint8_t c = 0; c < strDown.length(); c++) {
uint8_t value = strDown[c];
if (value < 10) Serial.print(F("0"));
Serial.print(value, HEX);
}
Serial.println();
} else {
Serial.println(F("<MAC commands only>"));
}
@ -232,30 +194,22 @@ void loop() {
// print extra information about the event
Serial.println(F("[LoRaWAN] Event information:"));
Serial.print(F("[LoRaWAN] Direction:\t"));
if(event.dir == RADIOLIB_LORAWAN_CHANNEL_DIR_UPLINK) {
Serial.println(F("uplink"));
} else {
Serial.println(F("downlink"));
}
Serial.print(F("[LoRaWAN] Confirmed:\t"));
Serial.println(event.confirmed);
Serial.println(downlinkDetails.confirmed);
Serial.print(F("[LoRaWAN] Confirming:\t"));
Serial.println(event.confirming);
Serial.println(downlinkDetails.confirming);
Serial.print(F("[LoRaWAN] Datarate:\t"));
Serial.println(event.datarate);
Serial.println(downlinkDetails.datarate);
Serial.print(F("[LoRaWAN] Frequency:\t"));
Serial.print(event.freq, 3);
Serial.print(downlinkDetails.freq, 3);
Serial.println(F(" MHz"));
Serial.print(F("[LoRaWAN] Output power:\t"));
Serial.print(event.power);
Serial.print(downlinkDetails.power);
Serial.println(F(" dBm"));
Serial.print(F("[LoRaWAN] Frame count:\t"));
Serial.println(event.fcnt);
Serial.println(downlinkDetails.fcnt);
Serial.print(F("[LoRaWAN] Port:\t\t"));
Serial.println(event.port);
Serial.print(radio.getFrequencyError());
Serial.println(downlinkDetails.port);
uint8_t margin = 0;
uint8_t gwCnt = 0;
@ -276,21 +230,26 @@ void loop() {
}
} else if(state == RADIOLIB_ERR_RX_TIMEOUT) {
Serial.println(F("timeout!"));
// Not really necessary to report normal operation
} else {
Serial.print(F("failed, code "));
Serial.println(state);
}
// on EEPROM enabled boards, you should save the current session
// by calling "saveSession" which allows retrieving the session after reboot or deepsleep
// on boards that can save to Flash or EEPROM this saves the session
// which allows recall of the session after reboot or deepsleep
node.saveSession();
// wait before sending another packet
uint32_t minimumDelay = 60000; // try to send once every minute
uint32_t interval = node.timeUntilUplink(); // calculate minimum duty cycle delay (per law!)
uint32_t delayMs = max(interval, minimumDelay); // cannot send faster than duty cycle allows
uint32_t minimumDelay = 3 * 60 * 1000; // try to send once every 3 minutes
uint32_t interval = node.timeUntilUplink(); // calculate minimum duty cycle delay (per FUP & law!)
uint32_t delayMs = max(interval, minimumDelay); // cannot send faster than duty cycle allows
Serial.print(F("[LoRaWAN] Next uplink in "));
Serial.print(delayMs/1000);
Serial.println(F("s"));
delay(delayMs);
}
} // loop