kopia lustrzana https://github.com/bazjo/RS41_Hardware
Update README_EN.md
rodzic
48a57c2d3f
commit
0b1cd3928a
|
@ -118,10 +118,7 @@ The following interfaces are provided
|
|||
* NFC interface
|
||||
|
||||
## EEPROM
|
||||
On the back of the board there is a footprint for an SPI-EEPROM `U601` with generic pinout, which shares the SPI bus with radio and internal expansion connector. This is most likely used to implement the Radio Silence Mode in the military version RS41-SGM, but so far no such sonde finding is known to confirm this hypothesis. In Radio Silence Mode, the probe stores the ascent readings up to a certain altitude or time and sends them to the ground station alternating with the current frames. Since the internal memory of the MCU used, even in a configuration with more memory, is not sufficient for this purpose, the use of an EEPROM for this purpose seems to make sense.
|
||||
|
||||
## EEPROM
|
||||
On the back of the board there is a footprint for an SPI-EEPROM `U601` with generic pinout, which shares the SPI bus with radio and internal expansion connector. This is most likely used to implement the Radio Silence Mode in the military version RS41-SGM, but so far no such probe is known to confirm this hypothesis. In Radio Silence Mode, the probe stores the ascent readings up to a certain altitude or time and sends them to the ground station alternating with the current frames. Since the internal memory of the MCU used, even in a configuration with more memory, is not sufficient for this purpose, the use of an EEPROM for this purpose seems to make sense.
|
||||
On the back of the board there is a footprint for an SPI-EEPROM `U601` with generic pinout, which shares the SPI bus with radio and internal expansion connector. This is most likely used to implement the Radio Silence Mode in the military version RS41-SGM, but so far no such sonde finding is known to confirm this hypothesis. In Radio Silence Mode, the sonde stores the ascent readings up to a certain altitude or time and sends them to the ground station alternating with the current frames. Since the internal memory of the MCU used, even in a configuration with more memory, is not sufficient for this purpose, the use of an EEPROM for this purpose seems to make sense.
|
||||
|
||||
## XDATA and programming connectors
|
||||
On the 2x5 2 mm pinheader `J602` at the lower edge of the sonde the following connections are brought out
|
||||
|
|
Ładowanie…
Reference in New Issue