From e54beaf61fa484ec5507ca96158a3c9554378c6d Mon Sep 17 00:00:00 2001 From: Chudson16 <70709606+Chudson16@users.noreply.github.com> Date: Tue, 25 Jul 2023 14:49:32 -0400 Subject: [PATCH] Update tutorials.rst Started off fixing one typo but ended up just rewording line Problematic Content: "approach to flying can be take longer than typical flights" Issue: "be" before "take" should not be there. Solution: Remove "be" Additional changes: wording was a bit bulky and long so ended up just rephrasing the line --- source/tutorials.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/tutorials.rst b/source/tutorials.rst index f53cf9cef..09554278f 100644 --- a/source/tutorials.rst +++ b/source/tutorials.rst @@ -41,7 +41,7 @@ To mitigate this effect, there are a few options but the simplest are as follows :height: 480 :width: 640 -As this approach to flying can be take longer than typical flights, a pilot or team can fly a small area using the above approach. OpenDroneMap will generate a calibration file called cameras.json that then can be imported to be used to calibrate another flight that is more efficiently flown. +As this approach takes longer than traditional imaging, pilots and teams may apply this technique to a smaller area and use the collected data to optimize future flights. OpenDroneMap can generate a calibration file called cameras.json from a small sample flight. The calibration file can be used for future flights, mitigating the bowling effect without sacrificing efficiency. Alternatively, the following experimental method can be applied: fly with much lower overlap, but two *crossgrid* flights (sometimes called crosshatch) separated by 20° with a 5° forward facing camera.