kopia lustrzana https://github.com/lightaprs/LightAPRS-W-1.0
97 wiersze
3.5 KiB
C++
Executable File
97 wiersze
3.5 KiB
C++
Executable File
/*
|
|
* si5351_phase.ino - Example for setting phase with Si5351Arduino library
|
|
*
|
|
* Copyright (C) 2015 - 2016 Jason Milldrum <milldrum@gmail.com>
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*
|
|
* Setting the phase of a clock requires that you manually set the PLL and
|
|
* take the PLL frequency into account when calculation the value to place
|
|
* in the phase register. As shown on page 10 of Silicon Labs Application
|
|
* Note 619 (AN619), the phase register is a 7-bit register, where a bit
|
|
* represents a phase difference of 1/4 the PLL period. Therefore, the best
|
|
* way to get an accurate phase setting is to make the PLL an even multiple
|
|
* of the clock frequency, depending on what phase you need.
|
|
*
|
|
* If you need a 90 degree phase shift (as in many RF applications), then
|
|
* it is quite easy to determine your parameters. Pick a PLL frequency that
|
|
* is an even multiple of your clock frequency (remember that the PLL needs
|
|
* to be in the range of 600 to 900 MHz). Then to set a 90 degree phase shift,
|
|
* you simply enter that multiple into the phase register. Remember when
|
|
* setting multiple outputs to be phase-related to each other, they each need
|
|
* to be referenced to the same PLL.
|
|
*/
|
|
|
|
#include "si5351.h"
|
|
#include "Wire.h"
|
|
|
|
Si5351 si5351;
|
|
|
|
void setup()
|
|
{
|
|
// Start serial and initialize the Si5351
|
|
Serial.begin(57600);
|
|
si5351.init(SI5351_CRYSTAL_LOAD_8PF, 0, 0);
|
|
|
|
// We will output 14.1 MHz on CLK0 and CLK1.
|
|
// A PLLA frequency of 705 MHz was chosen to give an even
|
|
// divisor by 14.1 MHz.
|
|
unsigned long long freq = 1410000000ULL;
|
|
unsigned long long pll_freq = 70500000000ULL;
|
|
|
|
// Set CLK0 and CLK1 to use PLLA as the MS source.
|
|
// This is not explicitly necessary in v2 of this library,
|
|
// as these are already the default assignments.
|
|
// si5351.set_ms_source(SI5351_CLK0, SI5351_PLLA);
|
|
// si5351.set_ms_source(SI5351_CLK1, SI5351_PLLA);
|
|
|
|
// Set CLK0 and CLK1 to output 14.1 MHz with a fixed PLL frequency
|
|
si5351.set_freq_manual(freq, pll_freq, SI5351_CLK0);
|
|
si5351.set_freq_manual(freq, pll_freq, SI5351_CLK1);
|
|
|
|
// Now we can set CLK1 to have a 90 deg phase shift by entering
|
|
// 50 in the CLK1 phase register, since the ratio of the PLL to
|
|
// the clock frequency is 50.
|
|
si5351.set_phase(SI5351_CLK0, 0);
|
|
si5351.set_phase(SI5351_CLK1, 50);
|
|
|
|
// We need to reset the PLL before they will be in phase alignment
|
|
si5351.pll_reset(SI5351_PLLA);
|
|
|
|
// Query a status update and wait a bit to let the Si5351 populate the
|
|
// status flags correctly.
|
|
si5351.update_status();
|
|
delay(500);
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
// Read the Status Register and print it every 10 seconds
|
|
si5351.update_status();
|
|
Serial.print("SYS_INIT: ");
|
|
Serial.print(si5351.dev_status.SYS_INIT);
|
|
Serial.print(" LOL_A: ");
|
|
Serial.print(si5351.dev_status.LOL_A);
|
|
Serial.print(" LOL_B: ");
|
|
Serial.print(si5351.dev_status.LOL_B);
|
|
Serial.print(" LOS: ");
|
|
Serial.print(si5351.dev_status.LOS);
|
|
Serial.print(" REVID: ");
|
|
Serial.println(si5351.dev_status.REVID);
|
|
|
|
delay(10000);
|
|
}
|