Hamlib/rigs/drake/r8a.c

195 wiersze
5.3 KiB
C

/*
* Hamlib Drake backend - R-8A description
* Copyright (c) 2001-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <hamlib/config.h>
#include <stdlib.h>
#include <hamlib/rig.h>
#include "drake.h"
#define R8A_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_AM|RIG_MODE_AMS|RIG_MODE_FM)
#define R8A_FUNC (RIG_FUNC_MN|RIG_FUNC_LOCK|RIG_FUNC_NB)
#define R8A_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH)
#define R8A_PARM_ALL (RIG_PARM_TIME)
#define R8A_VFO (RIG_VFO_A|RIG_VFO_B|RIG_VFO_VFO|RIG_VFO_MEM)
#define R8A_VFO_OPS (RIG_OP_UP|RIG_OP_DOWN|RIG_OP_TO_VFO|RIG_OP_FROM_VFO|RIG_OP_MCL|RIG_OP_CPY)
#define R8A_ANTS (RIG_ANT_1|RIG_ANT_2|RIG_ANT_3)
#define R8A_STR_CAL { 16, { \
{ 0, -60 }, \
{ 1, -48 }, \
{ 11, -42 }, \
{ 27, -36 }, \
{ 39, -30 }, \
{ 51, -24 }, \
{ 64, -18 }, \
{ 80, -12 }, \
{ 97, -6 }, \
{ 116, 0 }, \
{ 138, 10 }, \
{ 163, 20 }, \
{ 195, 30 }, \
{ 217, 40 }, \
{ 228, 50 }, \
{ 255, 60 }, \
} }
/*
* channel caps.
*/
#define DRAKE_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.width = 1, \
.ant = 1, \
.funcs = R8A_FUNC, \
.levels = RIG_LEVEL_AGC|RIG_LEVEL_ATT|RIG_LEVEL_PREAMP, \
.channel_desc = 1, \
}
/*
* R-8A rig capabilities.
*
* specs: http://www.dxing.com/rx/r8.htm
*
*/
const struct rig_caps r8a_caps =
{
RIG_MODEL(RIG_MODEL_DKR8A),
.model_name = "R-8A",
.mfg_name = "Drake",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 9600,
.serial_rate_max = 9600,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = 0,
.post_write_delay = 1,
.timeout = 200,
.retry = 3,
.has_get_func = R8A_FUNC,
.has_set_func = R8A_FUNC,
.has_get_level = R8A_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(R8A_LEVEL_ALL),
.has_get_parm = R8A_PARM_ALL,
.has_set_parm = RIG_PARM_SET(R8A_PARM_ALL),
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { 10, RIG_DBLST_END },
.attenuator = { 10, RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_OFF, /* TODO: actually has RIG_TRN_RIG */
.bank_qty = 0,
.chan_desc_sz = 7,
.vfo_ops = R8A_VFO_OPS,
.chan_list = {
{ 0, 439, RIG_MTYPE_MEM, DRAKE_MEM_CAP },
RIG_CHAN_END
},
.rx_range_list1 = {
{kHz(100), MHz(30), R8A_MODES, -1, -1, R8A_VFO, R8A_ANTS},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(100), MHz(30), R8A_MODES, -1, -1, R8A_VFO, R8A_ANTS},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
{R8A_MODES, 10},
{R8A_MODES, 100},
{R8A_MODES, kHz(1)},
{R8A_MODES, kHz(10)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_FM, kHz(12)},
{RIG_MODE_AM | RIG_MODE_AMS, kHz(6)},
{RIG_MODE_AM | RIG_MODE_AMS, kHz(4)},
{RIG_MODE_SSB | RIG_MODE_RTTY, kHz(2.3)},
{RIG_MODE_SSB | RIG_MODE_RTTY, kHz(1.8)},
{RIG_MODE_SSB | RIG_MODE_RTTY, kHz(4)},
{RIG_MODE_CW, Hz(500)},
{RIG_MODE_CW, kHz(1.8)},
RIG_FLT_END,
},
.str_cal = R8A_STR_CAL,
.priv = NULL,
.rig_init = drake_init,
.rig_cleanup = drake_cleanup,
.set_freq = drake_set_freq,
.get_freq = drake_get_freq,
.set_vfo = drake_set_vfo,
.get_vfo = drake_get_vfo,
.set_mode = drake_set_mode,
.get_mode = drake_get_mode,
.set_func = drake_set_func,
.get_func = drake_get_func,
.set_level = drake_set_level,
.get_level = drake_get_level,
.set_ant = drake_set_ant,
.get_ant = drake_get_ant,
.set_mem = drake_set_mem,
.get_mem = drake_get_mem,
.set_channel = drake_set_chan,
.get_channel = drake_get_chan,
.vfo_op = drake_vfo_op,
.set_powerstat = drake_set_powerstat,
.get_powerstat = drake_get_powerstat,
.get_info = drake_get_info,
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};
/*
* Function definitions below
*/