kopia lustrzana https://github.com/Hamlib/Hamlib
488 wiersze
21 KiB
C
488 wiersze
21 KiB
C
/*
|
|
* Hamlib CI-V backend - main header
|
|
* Copyright (c) 2000-2016 by Stephane Fillod
|
|
*
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with this library; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#ifndef _ICOM_H
|
|
#define _ICOM_H 1
|
|
|
|
#include "hamlib/rig.h"
|
|
#include "cal.h"
|
|
#include "tones.h"
|
|
|
|
#ifdef HAVE_SYS_TIME_H
|
|
#include <sys/time.h>
|
|
#endif
|
|
|
|
#define BACKEND_VER "20210907"
|
|
|
|
#define ICOM_IS_SECONDARY_VFO(vfo) ((vfo) & (RIG_VFO_B | RIG_VFO_SUB | RIG_VFO_SUB_B | RIG_VFO_MAIN_B))
|
|
#define ICOM_GET_VFO_NUMBER(vfo) (ICOM_IS_SECONDARY_VFO(vfo) ? 0x01 : 0x00)
|
|
|
|
#define ICOM_MAX_SPECTRUM_FREQ_RANGES 20
|
|
|
|
/*
|
|
* defines used by comp_cal_str in rig.c
|
|
* STR_CAL_LENGTH is the length of the S Meter calibration table
|
|
* STR_CAL_S0 is the value in dB of the lowest value (not even in table)
|
|
* MULTIB_SUBCMD allows the dsp rigs ie pro models to use multibyte subcommands for all the extra
|
|
* parameters and levels.
|
|
*/
|
|
#define STR_CAL_LENGTH 16
|
|
#define STR_CAL_S0 -54
|
|
#define MULTIB_SUBCMD
|
|
|
|
/*
|
|
* minimal channel caps.
|
|
* If your rig has better/lesser, don't modify this define but clone it,
|
|
* so you don't change other rigs.
|
|
*/
|
|
#define IC_MIN_MEM_CAP { \
|
|
.freq = 1, \
|
|
.mode = 1, \
|
|
.width = 1, \
|
|
}
|
|
|
|
/*
|
|
* common channel caps.
|
|
* If your rig has better/lesser, don't modify this define but clone it,
|
|
* so you don't change other rigs.
|
|
*/
|
|
#define IC_MEM_CAP { \
|
|
.freq = 1, \
|
|
.mode = 1, \
|
|
.width = 1, \
|
|
.tx_freq = 1, \
|
|
.tx_mode = 1, \
|
|
.tx_width = 1, \
|
|
.rptr_offs = 1, \
|
|
}
|
|
|
|
/*
|
|
* S-Meter data for uncalibrated rigs
|
|
*/
|
|
#define UNKNOWN_IC_STR_CAL { 2, {{ 0, -60}, { 255, 60}} }
|
|
|
|
struct ts_sc_list
|
|
{
|
|
shortfreq_t ts; /* tuning step */
|
|
unsigned char sc; /* sub command */
|
|
};
|
|
|
|
/**
|
|
* \brief Pipelined tuning state data structure.
|
|
*/
|
|
typedef struct rig_pltstate
|
|
{
|
|
freq_t freq;
|
|
freq_t next_freq;
|
|
rmode_t mode;
|
|
rmode_t next_mode;
|
|
pbwidth_t width;
|
|
pbwidth_t next_width;
|
|
struct timeval timer_start;
|
|
struct timeval timer_current;
|
|
int usleep_time; /* dependent on radio module & serial data rate */
|
|
} pltstate_t;
|
|
|
|
/**
|
|
* \brief Mappings between Hamlib and Icom AGC levels
|
|
*/
|
|
struct icom_agc_level
|
|
{
|
|
enum agc_level_e
|
|
level; /*!< Hamlib AGC level from agc_level_e enum, the last entry should have level -1 */
|
|
unsigned char
|
|
icom_level; /*!< Icom AGC level for C_CTL_FUNC (0x16), S_FUNC_AGC (0x12) command */
|
|
};
|
|
|
|
typedef enum
|
|
{
|
|
CMD_PARAM_TYPE_NONE,
|
|
CMD_PARAM_TYPE_LEVEL,
|
|
CMD_PARAM_TYPE_PARM,
|
|
CMD_PARAM_TYPE_TOKEN,
|
|
CMD_PARAM_TYPE_FUNC,
|
|
} cmd_param_t;
|
|
|
|
/**
|
|
* \brief Lookup table item for Icom levels & parms
|
|
*/
|
|
struct cmdparams
|
|
{
|
|
union
|
|
{
|
|
setting_t s; /*!< Level or parm */
|
|
token_t t; /*!< TOKEN_BACKEND */
|
|
} id;
|
|
cmd_param_t cmdparamtype; /*!< CMD_PARAM_TYPE_LEVEL or CMD_PARAM_TYPE_PARM */
|
|
int command; /*!< CI-V command */
|
|
int subcmd; /*!< CI-V Subcommand */
|
|
int submod; /*!< Subcommand modifier */
|
|
int sublen; /*!< Number of bytes for subcommand extension */
|
|
unsigned char subext[4]; /*!< Subcommand extension bytes */
|
|
int dattyp; /*!< Data type conversion */
|
|
int datlen; /*!< Number of data bytes in frame */
|
|
};
|
|
|
|
/**
|
|
* \brief Icom-specific spectrum scope capabilities, if supported by the rig.
|
|
*/
|
|
struct icom_spectrum_scope_caps
|
|
{
|
|
int spectrum_line_length; /*!< Number of bytes in a complete spectrum scope line */
|
|
int single_frame_data_length; /*!< Number of bytes of specrtum data in a single CI-V frame when the data split to multiple frames */
|
|
int data_level_min; /*!< */
|
|
int data_level_max;
|
|
double signal_strength_min;
|
|
double signal_strength_max;
|
|
};
|
|
|
|
/**
|
|
* \brief Icom spectrum scope edge frequencies, if supported by the rig.
|
|
*
|
|
* Last entry should have zeros in all fields.
|
|
*/
|
|
struct icom_spectrum_edge_frequency_range
|
|
{
|
|
int range_id; /*!< ID of the range, as specified in the Icom CI-V manuals. First range ID is 1. */
|
|
freq_t low_freq; /*!< The low edge frequency if the range in Hz */
|
|
freq_t high_freq; /*!< The high edge frequency if the range in Hz */
|
|
};
|
|
|
|
/**
|
|
* \brief Cached Icom spectrum scope data.
|
|
*
|
|
* This data is used to store data for current line of spectrum data as it is being received from the rig.
|
|
* Caching the data is necessary for handling spectrum scope data split in multiple CI-V frames.
|
|
*/
|
|
struct icom_spectrum_scope_cache
|
|
{
|
|
int id; /*!< Numeric ID of the spectrum scope data stream identifying the VFO/receiver. First ID is zero. Icom rigs with multiple scopes have IDs: 0 = Main, 1 = Sub. */
|
|
int spectrum_metadata_valid; /*!< Boolean value to track validity of the cached data for spectrum scope. */
|
|
enum rig_spectrum_mode_e spectrum_mode; /*!< The spectrum mode of the current spectrum scope line being received. */
|
|
freq_t spectrum_center_freq; /*!< The center frequency of the current spectrum scope line being received */
|
|
freq_t spectrum_span_freq; /*!< The frequency span of the current spectrum scope line being received */
|
|
freq_t spectrum_low_edge_freq; /*!< The low edge frequency of the current spectrum scope line being received */
|
|
freq_t spectrum_high_edge_freq; /*!< The high edge frequency of the current spectrum scope line being received */
|
|
int spectrum_data_length; /*!< Number of bytes of 8-bit spectrum data in the data buffer. The amount of data may vary if the rig has multiple spectrum scopes, depending on the scope. */
|
|
unsigned char *spectrum_data; /*!< Dynamically allocated buffer for raw spectrum data */
|
|
};
|
|
|
|
struct icom_priv_caps
|
|
{
|
|
unsigned char re_civ_addr; /*!< The remote equipment's default CI-V address */
|
|
int civ_731_mode; /*!< Off: freqs on 10 digits, On: freqs on 8 digits plus passband setting */
|
|
// According to the CI-V+ manual the IC-781, IC-R9000, and IC-R7000 can select pas$
|
|
// The other rigs listed apparently cannot and may need the civ_731_mode=1 which are
|
|
// 1-706
|
|
// 2-706MKII
|
|
// 3-706MKIIG
|
|
// 4-707
|
|
// 5-718
|
|
// 6-746
|
|
// 7-746PRO
|
|
// 8-756
|
|
// 9-756PRO
|
|
// 10-756PROII
|
|
// 11-820H
|
|
// 12-821H
|
|
// 13-910H
|
|
// 14-R10
|
|
// 15-R8500
|
|
// 16-703
|
|
// 17-7800
|
|
|
|
int no_xchg; /*!< Off: use VFO XCHG to set other VFO, On: use set VFO to set other VFO */
|
|
const struct ts_sc_list *ts_sc_list;
|
|
// the 4 elements above are mandatory
|
|
// everything below here is optional in the backends
|
|
int settle_time; /*!< Receiver settle time, in ms */
|
|
int (*r2i_mode)(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width,
|
|
unsigned char *md, signed char *pd); /*!< backend specific code
|
|
to convert bandwidth and
|
|
mode to cmd tokens */
|
|
void (*i2r_mode)(RIG *rig, unsigned char md, int pd,
|
|
rmode_t *mode, pbwidth_t *width); /*!< backend specific code
|
|
to convert response
|
|
tokens to bandwidth and
|
|
mode */
|
|
int antack_len; /*!< Length of 0x12 cmd may be 3 or 4 bytes as of 2020-01-22 e.g. 7851 */
|
|
int ant_count; /*!< Number of antennas */
|
|
int serial_full_duplex; /*!< Whether RXD&TXD are not tied together */
|
|
int offs_len; /*!< Number of bytes in offset frequency field. 0 defaults to 3 */
|
|
int serial_USB_echo_check; /*!< Flag to test USB echo state */
|
|
int agc_levels_present; /*!< Flag to indicate that agc_levels array is populated */
|
|
struct icom_agc_level agc_levels[RIG_AGC_LAST + 1]; /*!< Icom rig-specific AGC levels, the last entry should have level -1 */
|
|
struct icom_spectrum_scope_caps spectrum_scope_caps; /*!< Icom spectrum scope capabilities, if supported by the rig. Main/Sub scopes in Icom rigs have the same caps. */
|
|
struct icom_spectrum_edge_frequency_range spectrum_edge_frequency_ranges[ICOM_MAX_SPECTRUM_FREQ_RANGES]; /*!< Icom spectrum scope edge frequencies, if supported by the rig. Last entry should have zeros in all fields. */
|
|
struct cmdparams *extcmds; /*!< Pointer to extended operations array */
|
|
};
|
|
|
|
struct icom_priv_data
|
|
{
|
|
unsigned char re_civ_addr; /*!< The remote equipment's CI-V address */
|
|
int civ_731_mode; /*!< Off: freqs on 10 digits, On: freqs on 8 digits */
|
|
int no_xchg; /*!< Off: use VFO XCHG to set other VFO, On: use set VFO to set other VFO */
|
|
int no_1a_03_cmd; /*!< Rig doesn't tell IF widths */
|
|
int split_on; /*!< Record split state */
|
|
pltstate_t *pltstate; /*!< Only on optoscan */
|
|
int serial_USB_echo_off; /*!< USB is not set to echo */
|
|
/* we track vfos internally for use with different functions like split */
|
|
/* this allows queries using CURR_VFO and Main/Sub to behave */
|
|
vfo_t rx_vfo;
|
|
vfo_t tx_vfo;
|
|
freq_t curr_freq; /*!< Our current freq depending on which vfo is selected */
|
|
freq_t main_freq; /*!< Track last setting of main -- not being used yet */
|
|
freq_t sub_freq; /*!< Track last setting of sub -- not being used yet */
|
|
freq_t maina_freq;
|
|
freq_t mainb_freq;
|
|
freq_t suba_freq;
|
|
freq_t subb_freq;
|
|
freq_t vfoa_freq; /*!< Track last setting of vfoa -- used to return last freq when ptt is asserted */
|
|
freq_t vfob_freq; /*!< Track last setting of vfob -- used to return last freq when ptt is asserted */
|
|
int x25cmdfails; /*!< This will get set if the 0x25 command fails so we try just once */
|
|
int x26cmdfails; /*!< This will get set if the 0x26 command fails so we try just once */
|
|
int x1cx03cmdfails; /*!< This will get set if the 0x1c 0x03 command fails so we try just once */
|
|
int poweron; /*!< To prevent powering on more than once */
|
|
unsigned char filter; /*!< Current filter selected */
|
|
unsigned char datamode; /*!< Current datamode */
|
|
int spectrum_scope_count; /*!< Number of spectrum scopes, calculated from caps */
|
|
struct icom_spectrum_scope_cache spectrum_scope_cache[HAMLIB_MAX_SPECTRUM_SCOPES]; /*!< Cached Icom spectrum scope data used during reception of the data. The array index must match the scope ID. */
|
|
};
|
|
|
|
extern const struct ts_sc_list r8500_ts_sc_list[];
|
|
extern const struct ts_sc_list r8600_ts_sc_list[];
|
|
extern const struct ts_sc_list ic737_ts_sc_list[];
|
|
extern const struct ts_sc_list r75_ts_sc_list[];
|
|
extern const struct ts_sc_list r7100_ts_sc_list[];
|
|
extern const struct ts_sc_list r9000_ts_sc_list[];
|
|
extern const struct ts_sc_list r9500_ts_sc_list[];
|
|
extern const struct ts_sc_list ic756_ts_sc_list[];
|
|
extern const struct ts_sc_list ic756pro_ts_sc_list[];
|
|
extern const struct ts_sc_list ic705_ts_sc_list[];
|
|
extern const struct ts_sc_list ic706_ts_sc_list[];
|
|
extern const struct ts_sc_list ic7000_ts_sc_list[];
|
|
extern const struct ts_sc_list ic7100_ts_sc_list[];
|
|
extern const struct ts_sc_list ic7200_ts_sc_list[];
|
|
extern const struct ts_sc_list ic7300_ts_sc_list[];
|
|
extern const struct ts_sc_list ic9700_ts_sc_list[];
|
|
extern const struct ts_sc_list ic910_ts_sc_list[];
|
|
extern const struct ts_sc_list ic718_ts_sc_list[];
|
|
extern const struct ts_sc_list x108g_ts_sc_list[];
|
|
|
|
extern const pbwidth_t
|
|
rtty_fil[]; /* rtty filter passband width; available on 746pro and 756pro rigs */
|
|
|
|
pbwidth_t icom_get_dsp_flt(RIG *rig, rmode_t mode);
|
|
|
|
int icom_init(RIG *rig);
|
|
int icom_rig_open(RIG *rig);
|
|
int icom_rig_close(RIG *rig);
|
|
int icom_cleanup(RIG *rig);
|
|
int icom_set_freq(RIG *rig, vfo_t vfo, freq_t freq);
|
|
int icom_get_freq(RIG *rig, vfo_t vfo, freq_t *freq);
|
|
int icom_get_rit_new(RIG *rig, vfo_t vfo, shortfreq_t *ts);
|
|
int icom_set_rit_new(RIG *rig, vfo_t vfo, shortfreq_t ts);
|
|
int icom_set_xit_new(RIG *rig, vfo_t vfo, shortfreq_t ts);
|
|
int icom_set_mode_with_data(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width);
|
|
int icom_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width);
|
|
int icom_get_mode_with_data(RIG *rig, vfo_t vfo, rmode_t *mode,
|
|
pbwidth_t *width);
|
|
int icom_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width);
|
|
int icom_get_vfo(RIG *rig, vfo_t *vfo);
|
|
int icom_set_vfo(RIG *rig, vfo_t vfo);
|
|
int icom_set_rptr_shift(RIG *rig, vfo_t vfo, rptr_shift_t rptr_shift);
|
|
int icom_get_rptr_shift(RIG *rig, vfo_t vfo, rptr_shift_t *rptr_shift);
|
|
int icom_set_rptr_offs(RIG *rig, vfo_t vfo, shortfreq_t rptr_offs);
|
|
int icom_get_rptr_offs(RIG *rig, vfo_t vfo, shortfreq_t *rptr_offs);
|
|
int icom_set_split_freq(RIG *rig, vfo_t vfo, freq_t tx_freq);
|
|
int icom_get_split_freq(RIG *rig, vfo_t vfo, freq_t *tx_freq);
|
|
int icom_set_split_mode(RIG *rig, vfo_t vfo, rmode_t tx_mode,
|
|
pbwidth_t tx_width);
|
|
int icom_get_split_mode(RIG *rig, vfo_t vfo, rmode_t *tx_mode,
|
|
pbwidth_t *tx_width);
|
|
int icom_set_split_freq_mode(RIG *rig, vfo_t vfo, freq_t tx_freq,
|
|
rmode_t tx_mode, pbwidth_t tx_width);
|
|
int icom_get_split_freq_mode(RIG *rig, vfo_t vfo, freq_t *tx_freq,
|
|
rmode_t *tx_mode, pbwidth_t *tx_width);
|
|
int icom_set_split_vfo(RIG *rig, vfo_t vfo, split_t split, vfo_t tx_vfo);
|
|
int icom_get_split_vfo(RIG *rig, vfo_t vfo, split_t *split, vfo_t *tx_vfo);
|
|
int icom_mem_get_split_vfo(RIG *rig, vfo_t vfo, split_t *split, vfo_t *tx_vfo);
|
|
int icom_set_ts(RIG *rig, vfo_t vfo, shortfreq_t ts);
|
|
int icom_get_ts(RIG *rig, vfo_t vfo, shortfreq_t *ts);
|
|
int icom_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt);
|
|
int icom_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt);
|
|
int icom_get_dcd(RIG *rig, vfo_t vfo, dcd_t *dcd);
|
|
int icom_set_ctcss_tone(RIG *rig, vfo_t vfo, tone_t tone);
|
|
int icom_get_ctcss_tone(RIG *rig, vfo_t vfo, tone_t *tone);
|
|
int icom_set_ctcss_sql(RIG *rig, vfo_t vfo, tone_t tone);
|
|
int icom_get_ctcss_sql(RIG *rig, vfo_t vfo, tone_t *tone);
|
|
int icom_set_dcs_code(RIG *rig, vfo_t vfo, tone_t code);
|
|
int icom_get_dcs_code(RIG *rig, vfo_t vfo, tone_t *code);
|
|
int icom_set_dcs_sql(RIG *rig, vfo_t vfo, tone_t code);
|
|
int icom_get_dcs_sql(RIG *rig, vfo_t vfo, tone_t *code);
|
|
int icom_set_bank(RIG *rig, vfo_t vfo, int bank);
|
|
int icom_set_mem(RIG *rig, vfo_t vfo, int ch);
|
|
int icom_vfo_op(RIG *rig, vfo_t vfo, vfo_op_t op);
|
|
int icom_scan(RIG *rig, vfo_t vfo, scan_t scan, int ch);
|
|
int icom_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val);
|
|
int icom_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val);
|
|
int icom_set_ext_level(RIG *rig, vfo_t vfo, token_t token, value_t val);
|
|
int icom_get_ext_level(RIG *rig, vfo_t vfo, token_t token, value_t *val);
|
|
int icom_set_func(RIG *rig, vfo_t vfo, setting_t func, int status);
|
|
int icom_get_func(RIG *rig, vfo_t vfo, setting_t func, int *status);
|
|
int icom_set_ext_func(RIG *rig, vfo_t vfo, token_t token, int status);
|
|
int icom_get_ext_func(RIG *rig, vfo_t vfo, token_t token, int *status);
|
|
int icom_set_parm(RIG *rig, setting_t parm, value_t val);
|
|
int icom_get_parm(RIG *rig, setting_t parm, value_t *val);
|
|
int icom_set_ext_parm(RIG *rig, token_t token, value_t val);
|
|
int icom_get_ext_parm(RIG *rig, token_t token, value_t *val);
|
|
int icom_set_ext_cmd(RIG *rig, vfo_t vfo, token_t token, value_t val);
|
|
int icom_get_ext_cmd(RIG *rig, vfo_t vfo, token_t token, value_t *val);
|
|
int icom_set_conf(RIG *rig, token_t token, const char *val);
|
|
int icom_get_conf(RIG *rig, token_t token, char *val);
|
|
int icom_set_powerstat(RIG *rig, powerstat_t status);
|
|
int icom_get_powerstat(RIG *rig, powerstat_t *status);
|
|
int icom_set_ant(RIG *rig, vfo_t vfo, ant_t ant, value_t option);
|
|
int icom_get_ant(RIG *rig, vfo_t vfo, ant_t ant, value_t *option,
|
|
ant_t *ant_curr, ant_t *ant_tx, ant_t *ant_rx);
|
|
int icom_decode_event(RIG *rig);
|
|
int icom_power2mW(RIG *rig, unsigned int *mwpower, float power, freq_t freq,
|
|
rmode_t mode);
|
|
int icom_mW2power(RIG *rig, float *power, unsigned int mwpower, freq_t freq,
|
|
rmode_t mode);
|
|
int icom_send_morse(RIG *rig, vfo_t vfo, const char *msg);
|
|
int icom_stop_morse(RIG *rig, vfo_t vfo);
|
|
int icom_send_voice_mem(RIG *rig, vfo_t vfo, int bank);
|
|
/* Exposed routines */
|
|
int icom_get_split_vfos(RIG *rig, vfo_t *rx_vfo, vfo_t *tx_vfo);
|
|
int icom_set_raw(RIG *rig, int cmd, int subcmd, int subcmdbuflen,
|
|
unsigned char *subcmdbuf, int val_bytes, int val);
|
|
int icom_get_raw_buf(RIG *rig, int cmd, int subcmd, int subcmdbuflen,
|
|
unsigned char *subcmdbuf, int *reslen, unsigned char *res);
|
|
int icom_get_raw(RIG *rig, int cmd, int subcmd, int subcmdbuflen,
|
|
unsigned char *subcmdbuf, int *val);
|
|
int icom_set_level_raw(RIG *rig, setting_t level, int cmd, int subcmd,
|
|
int subcmdbuflen, unsigned char *subcmdbuf, int val_bytes, value_t val);
|
|
int icom_get_level_raw(RIG *rig, setting_t level, int cmd, int subcmd,
|
|
int subcmdbuflen, unsigned char *subcmdbuf, value_t *val);
|
|
int icom_set_custom_parm(RIG *rig, int parmbuflen, unsigned char *parmbuf,
|
|
int val_bytes, int value);
|
|
int icom_get_custom_parm(RIG *rig, int parmbuflen, unsigned char *parmbuf,
|
|
int *value);
|
|
int icom_set_custom_parm_time(RIG *rig, int parmbuflen, unsigned char *parmbuf,
|
|
int seconds);
|
|
int icom_get_custom_parm_time(RIG *rig, int parmbuflen, unsigned char *parmbuf,
|
|
int *seconds);
|
|
int icom_get_freq_range(RIG *rig);
|
|
int icom_is_async_frame(RIG *rig, int frame_len, const unsigned char *frame);
|
|
int icom_process_async_frame(RIG *rig, int frame_len, const unsigned char *frame);
|
|
|
|
extern const struct confparams icom_cfg_params[];
|
|
extern const struct confparams icom_ext_levels[];
|
|
extern const struct confparams icom_ext_funcs[];
|
|
extern const struct confparams icom_ext_parms[];
|
|
extern const struct cmdparams icom_ext_cmds[];
|
|
|
|
extern const struct rig_caps ic703_caps;
|
|
extern const struct rig_caps ic705_caps;
|
|
extern const struct rig_caps ic706_caps;
|
|
extern const struct rig_caps ic706mkii_caps;
|
|
extern const struct rig_caps ic706mkiig_caps;
|
|
extern const struct rig_caps ic707_caps;
|
|
extern const struct rig_caps ic718_caps;
|
|
extern const struct rig_caps ic725_caps;
|
|
extern const struct rig_caps ic726_caps;
|
|
extern const struct rig_caps ic728_caps;
|
|
extern const struct rig_caps ic729_caps;
|
|
extern const struct rig_caps ic735_caps;
|
|
extern const struct rig_caps ic736_caps;
|
|
extern const struct rig_caps ic737_caps;
|
|
extern const struct rig_caps ic738_caps;
|
|
extern const struct rig_caps ic746_caps;
|
|
extern const struct rig_caps ic7410_caps;
|
|
extern const struct rig_caps ic746pro_caps;
|
|
extern const struct rig_caps ic756_caps;
|
|
extern const struct rig_caps ic756pro_caps;
|
|
extern const struct rig_caps ic756pro2_caps;
|
|
extern const struct rig_caps ic756pro3_caps;
|
|
extern const struct rig_caps ic751_caps;
|
|
extern const struct rig_caps ic7600_caps;
|
|
extern const struct rig_caps ic7610_caps;
|
|
extern const struct rig_caps ic761_caps;
|
|
extern const struct rig_caps ic765_caps;
|
|
extern const struct rig_caps ic7700_caps;
|
|
extern const struct rig_caps ic775_caps;
|
|
extern const struct rig_caps ic78_caps;
|
|
extern const struct rig_caps ic7800_caps;
|
|
extern const struct rig_caps ic785x_caps;
|
|
extern const struct rig_caps ic7000_caps;
|
|
extern const struct rig_caps ic7100_caps;
|
|
extern const struct rig_caps ic7200_caps;
|
|
extern const struct rig_caps ic7300_caps;
|
|
extern const struct rig_caps ic781_caps;
|
|
extern const struct rig_caps ic820h_caps;
|
|
extern const struct rig_caps ic821h_caps;
|
|
extern const struct rig_caps ic910_caps;
|
|
extern const struct rig_caps ic9100_caps;
|
|
extern const struct rig_caps ic970_caps;
|
|
extern const struct rig_caps ic9700_caps;
|
|
extern const struct rig_caps icrx7_caps;
|
|
extern const struct rig_caps icr10_caps;
|
|
extern const struct rig_caps icr20_caps;
|
|
extern const struct rig_caps icr6_caps;
|
|
extern const struct rig_caps icr71_caps;
|
|
extern const struct rig_caps icr72_caps;
|
|
extern const struct rig_caps icr75_caps;
|
|
extern const struct rig_caps icr7000_caps;
|
|
extern const struct rig_caps icr7100_caps;
|
|
extern const struct rig_caps icr8500_caps;
|
|
extern const struct rig_caps icr9000_caps;
|
|
extern const struct rig_caps icr9500_caps;
|
|
extern const struct rig_caps ic271_caps;
|
|
extern const struct rig_caps ic275_caps;
|
|
extern const struct rig_caps ic471_caps;
|
|
extern const struct rig_caps ic475_caps;
|
|
extern const struct rig_caps ic575_caps;
|
|
extern const struct rig_caps ic1275_caps;
|
|
|
|
extern const struct rig_caps omnivip_caps;
|
|
extern const struct rig_caps delta2_caps;
|
|
|
|
extern const struct rig_caps os456_caps;
|
|
extern const struct rig_caps os535_caps;
|
|
|
|
extern const struct rig_caps ic92d_caps;
|
|
extern const struct rig_caps id1_caps;
|
|
extern const struct rig_caps id31_caps;
|
|
extern const struct rig_caps id51_caps;
|
|
extern const struct rig_caps id4100_caps;
|
|
extern const struct rig_caps id5100_caps;
|
|
extern const struct rig_caps ic2730_caps;
|
|
|
|
extern const struct rig_caps perseus_caps;
|
|
|
|
extern const struct rig_caps x108g_caps;
|
|
|
|
extern const struct rig_caps icr8600_caps;
|
|
extern const struct rig_caps icr30_caps;
|
|
|
|
#endif /* _ICOM_H */
|