Hamlib/tests/cachetest2.c

137 wiersze
3.6 KiB
C

/* This program does a fast iteration of v f m t s
* By Michael Black W9MDB
* This allows testing of another program using rigctld
* to test changin vfo, freq, mode, PTT, or split and see the change immediately in this program.
* Used in testing caching effects that have been added
* To compile:
* gcc -I../src -I../include -g -o cachetest2 cachetest2.c -lhamlib
* To run:
* rigctld
* ./cachetest2
* Note: cachtest2 should show immediately when v f m t s are changed
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <hamlib/rig.h>
#include <hamlib/riglist.h>
#include "sprintflst.h"
#include "misc.h"
int main(int argc, char *argv[])
{
RIG *my_rig;
char *rig_file, *info_buf;
int retcode;
int model;
int cache_timeout = 0;
if (argc != 1)
{
fprintf(stderr, "Usage: %s\n", argv[0]);
exit(1);
}
model = 2;
rig_set_debug(RIG_DEBUG_NONE);
/* Instantiate a rig */
my_rig = rig_init(model); // your rig model.
/* Set up serial port, baud rate */
rig_file = "127.0.0.1:4532"; // your serial device
strncpy(my_rig->state.rigport.pathname, rig_file, FILPATHLEN - 1);
/* Open my rig */
retcode = rig_open(my_rig);
if (retcode != RIG_OK)
{
fprintf(stderr, "%s: rig_open failed %s\n", __func__,
rigerror(retcode));
return 1;
}
rig_set_cache_timeout_ms(my_rig, CACHE_ALL, cache_timeout);
/* Give me ID info, e.g., firmware version. */
info_buf = (char *)rig_get_info(my_rig);
if (info_buf)
{
strtok(info_buf, "\r\n");
printf("Rig_info: '%s'\n", info_buf);
}
while (1)
{
static freq_t freq, freq_last = 0;
static rmode_t mode, mode_last = 0;
static pbwidth_t width, width_last = 0;
static vfo_t vfo, vfo_last = RIG_VFO_NONE;
static vfo_t txvfo, txvfo_last = RIG_VFO_NONE;
static ptt_t ptt, ptt_last = -1;
static split_t split, split_last = -1;
retcode = rig_get_vfo(my_rig, &vfo);
if (retcode != RIG_OK) { printf("Get vfo failed?? Err=%s\n", rigerror(retcode)); }
if (vfo != vfo_last)
{
printf("VFO = %s\n", rig_strvfo(vfo));
vfo_last = vfo;
}
retcode = rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
if (retcode != RIG_OK) { printf("Get freq failed?? Err=%s\n", rigerror(retcode)); }
if (freq != freq_last)
{
printf("VFO freq. = %.1f Hz\n", freq);
freq_last = freq;
}
retcode = rig_get_mode(my_rig, RIG_VFO_CURR, &mode, &width);
if (retcode != RIG_OK) { printf("Get mode failed?? Err=%s\n", rigerror(retcode)); }
if (mode != mode_last || width != width_last)
{
printf("Current mode = %s, width = %ld\n", rig_strrmode(mode), width);
mode_last = mode;
width_last = width;
}
retcode = rig_get_ptt(my_rig, RIG_VFO_CURR, &ptt);
if (retcode != RIG_OK) { printf("Get ptt failed?? Err=%s\n", rigerror(retcode)); }
if (ptt != ptt_last)
{
printf("ptt=%d\n", ptt);
ptt_last = ptt;
}
retcode = rig_get_split_vfo(my_rig, RIG_VFO_CURR, &split, &txvfo);
if (retcode != RIG_OK) { printf("Get split_vfo failed?? Err=%s\n", rigerror(retcode)); }
if (split != split_last || txvfo != txvfo_last)
{
printf("split=%d, tx_vfo=%s\n", split,
rig_strvfo(vfo));
split_last = split;
txvfo_last = txvfo;
}
}
rig_close(my_rig);
return 0;
};