kopia lustrzana https://github.com/Hamlib/Hamlib
478 wiersze
14 KiB
C
478 wiersze
14 KiB
C
/*
|
|
* Hamlib CI-V backend - description of IC-R75
|
|
* Copyright (c) 2000-2004 by Stephane Fillod
|
|
*
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with this library; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
#include "config.h"
|
|
#endif
|
|
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
|
|
#include "hamlib/rig.h"
|
|
#include "misc.h"
|
|
#include "idx_builtin.h"
|
|
|
|
#include "icom.h"
|
|
#include "icom_defs.h"
|
|
#include "frame.h"
|
|
|
|
|
|
/*
|
|
* IC-R8600
|
|
*
|
|
* TODO:
|
|
* RIG_FUNC
|
|
+ what about RF (TPF)? RIG_FUNC_RF is not an audio filter, r8600 has an audio TPF. Use FUNC_RF? RIG_FUNC_ is full...
|
|
+ add a gazillion of other, new functions, but how when RIG_FUNC_ is full?
|
|
* RIG_LEVEL_
|
|
+ add a gazillion of other, new level settings
|
|
* check _PARM_ALL features, what is supported and what not.
|
|
* correct ICR8600_STR_CAL data. Currently its just a copy of the IC-R75 data
|
|
* improve ICR8600_MEM_CAP, Currently its just a copy of the IC-R75 data, but the IC-R8600 can save much more data
|
|
* check icr8600_caps.lvl_gran for correctness, currently just copied data from IC-R75
|
|
* extend icr8600_caps.parm_gran for date
|
|
* correct filters in caps struct
|
|
* check LEVEL AGC, rig responds with 1:slow, 3:mid, 5:fast, docs says 1,2,3 Also AGC is mode specific. Was this alsways the case? Do we bother?
|
|
* calibrate LEVEL STRENGTH
|
|
*/
|
|
|
|
/*
|
|
Notes by DF4OR, while trying to understand hamlib
|
|
* RIG_FUNC_ is a 32 bit word, not extensible, how to add new functions/capabilities?
|
|
* TSQL: RIG_FUNC_TSQL is Tsql on/off function (TSQL status 0x16 0x43).
|
|
Actual TSQL frequency is set with icom_set_ctcss_sql() (0x1b 0x01)
|
|
icom_set_ctcss_tone() is for transmit ctrcss tone (not applicable here)
|
|
same for DCS
|
|
* Scan resume settingsare the old style (0x0e 0xd0-0xd3) and incomplete, implement better with scan funcs
|
|
|
|
*/
|
|
|
|
|
|
#define ICR8600_MODES (RIG_MODE_LSB|RIG_MODE_USB|RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_FM|RIG_MODE_WFM|RIG_MODE_CWR|RIG_MODE_RTTYR|RIG_MODE_SAM|RIG_MODE_SAL|RIG_MODE_SAH|RIG_MODE_P25|RIG_MODE_DSTAR|RIG_MODE_DPMR|RIG_MODE_NXDNVN|RIG_MODE_NXDN_N|RIG_MODE_DCR)
|
|
|
|
#define ICR8600_FUNC_ALL (RIG_FUNC_NB|RIG_FUNC_ANF|RIG_FUNC_MN|RIG_FUNC_NR|RIG_FUNC_AIP|RIG_FUNC_LOCK|RIG_FUNC_VSC|RIG_FUNC_RESUME|RIG_FUNC_TSQL)
|
|
|
|
#define ICR8600_LEVEL_ALL (RIG_LEVEL_ATT|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_SQL|RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_PREAMP|RIG_LEVEL_AGC|RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH)
|
|
|
|
#define ICR8600_PARM_ALL (RIG_PARM_ANN|RIG_PARM_BACKLIGHT|RIG_PARM_BEEP|RIG_PARM_TIME|RIG_PARM_KEYLIGHT)
|
|
|
|
#define ICR8600_VFO_ALL (RIG_VFO_VFO|RIG_VFO_MEM)
|
|
|
|
#define ICR8600_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
|
|
#define ICR8600_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_SLCT|RIG_SCAN_PRIO|RIG_SCAN_PRIO|RIG_SCAN_DELTA|RIG_SCAN_STOP)
|
|
|
|
#define ICR8600_ANTS_HF (RIG_ANT_1|RIG_ANT_2|RIG_ANT_3)
|
|
#define ICR8600_ANTS_VHF (RIG_ANT_1)
|
|
|
|
#define ICR8600_STR_CAL { 17, { \
|
|
{ 0, -60 }, \
|
|
{ 37, -54 }, \
|
|
{ 52, -48 }, \
|
|
{ 61, -42 }, \
|
|
{ 72, -36 }, \
|
|
{ 86, -30 }, \
|
|
{ 95, -24 }, \
|
|
{ 109, -18 }, \
|
|
{ 124, -12 }, \
|
|
{ 128, -6 }, \
|
|
{ 146, 0 }, \
|
|
{ 166, 10 }, \
|
|
{ 186, 20 }, \
|
|
{ 199, 30 }, \
|
|
{ 225, 40 }, \
|
|
{ 233, 50 }, \
|
|
{ 255, 60 }, \
|
|
} }
|
|
|
|
/*
|
|
* channel caps.
|
|
*/
|
|
#define ICR8600_MEM_CAP { \
|
|
.freq = 1, \
|
|
.mode = 1, \
|
|
.width = 1, \
|
|
.ant = 1, \
|
|
.levels = RIG_LEVEL_ATT|RIG_LEVEL_PREAMP, \
|
|
.channel_desc = 1, \
|
|
.flags = 1, \
|
|
}
|
|
|
|
static int icr8600_set_channel(RIG *rig, const channel_t *chan);
|
|
static int icr8600_get_channel(RIG *rig, channel_t *chan);
|
|
|
|
static const struct icom_priv_caps icr8600_priv_caps = {
|
|
0x96, /* default address */
|
|
0, /* 731 mode */
|
|
0, /* no XCHG */
|
|
r8600_ts_sc_list, /* list of tuning steps */
|
|
.civ_version = 1 /* modifies behaviour in various icom.c functions */
|
|
};
|
|
|
|
const struct rig_caps icr8600_caps = {
|
|
.rig_model = RIG_MODEL_ICR8600,
|
|
.model_name = "IC-R8600",
|
|
.mfg_name = "Icom",
|
|
.version = "0.1alpha",
|
|
.copyright = "LGPL",
|
|
.status = RIG_STATUS_ALPHA,
|
|
.rig_type = RIG_TYPE_RECEIVER,
|
|
.ptt_type = RIG_PTT_NONE,
|
|
.dcd_type = RIG_DCD_RIG,
|
|
.port_type = RIG_PORT_SERIAL,
|
|
.serial_rate_min = 300,
|
|
.serial_rate_max = 19200, // USB can do up to 115000
|
|
.serial_data_bits = 8,
|
|
.serial_stop_bits = 1,
|
|
.serial_parity = RIG_PARITY_NONE,
|
|
.serial_handshake = RIG_HANDSHAKE_NONE,
|
|
.write_delay = 0,
|
|
.post_write_delay = 1,
|
|
.timeout = 1000,
|
|
.retry = 3,
|
|
.has_get_func = ICR8600_FUNC_ALL,
|
|
.has_set_func = ICR8600_FUNC_ALL,
|
|
.has_get_level = ICR8600_LEVEL_ALL,
|
|
.has_set_level = RIG_LEVEL_SET(ICR8600_LEVEL_ALL),
|
|
.has_get_parm = ICR8600_PARM_ALL,
|
|
.has_set_parm = RIG_PARM_SET(ICR8600_PARM_ALL),
|
|
.level_gran = {
|
|
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
|
|
[LVL_PBT_IN] = { .min = { .f = -1280 }, .max = { .f = +1280 }, .step = { .f = 15 } },
|
|
[LVL_PBT_OUT] = { .min = { .f = -1280 }, .max = { .f = +1280 }, .step = { .f = 15 } },
|
|
[LVL_CWPITCH] = { .min = { .i = 300 }, .max = { .i = 900 }, .step = { .i = 10 } },
|
|
[LVL_NR] = { .min = { .f = 0.0 }, .max = { .f = 1.0 }, .step = { .f = 0.066666667 } },
|
|
},
|
|
.parm_gran = {
|
|
[PARM_TIME] = { .min = { .i = 0 }, .max = { .i = 86399} },
|
|
},
|
|
.ctcss_list = common_ctcss_list,
|
|
.dcs_list = common_dcs_list,
|
|
.preamp = { 20, RIG_DBLST_END, }, /* 20 on HF, 14 on VHF, UHF, same setting */
|
|
.attenuator = { 10, 20, 30, RIG_DBLST_END, },
|
|
.max_rit = Hz(0),
|
|
.max_xit = Hz(0),
|
|
.max_ifshift = Hz(0),
|
|
.targetable_vfo = 0,
|
|
.vfo_ops = ICR8600_VFO_OPS,
|
|
.scan_ops = ICR8600_SCAN_OPS,
|
|
.transceive = RIG_TRN_RIG,
|
|
.bank_qty = 100,
|
|
.chan_desc_sz = 16,
|
|
|
|
.chan_list = {
|
|
{ 0, 99, RIG_MTYPE_MEM, ICR8600_MEM_CAP },
|
|
{ 0, 99, RIG_MTYPE_EDGE, ICR8600_MEM_CAP },
|
|
/* to be extended */
|
|
RIG_CHAN_END,
|
|
},
|
|
|
|
.rx_range_list1 = {
|
|
{ kHz(10), MHz(3000), ICR8600_MODES, -1, -1, ICR8600_VFO_ALL, ICR8600_ANTS_VHF },
|
|
{ kHz(10), MHz(30), ICR8600_MODES, -1, -1, ICR8600_VFO_ALL, ICR8600_ANTS_HF },
|
|
RIG_FRNG_END, },
|
|
.tx_range_list1 = { RIG_FRNG_END, },
|
|
|
|
.rx_range_list2 = {
|
|
{ kHz(10), MHz(3000), ICR8600_MODES, -1, -1, ICR8600_VFO_ALL, ICR8600_ANTS_VHF },
|
|
{ kHz(10), MHz(30), ICR8600_MODES, -1, -1, ICR8600_VFO_ALL, ICR8600_ANTS_HF },
|
|
RIG_FRNG_END, },
|
|
.tx_range_list2 = { RIG_FRNG_END, },
|
|
|
|
.tuning_steps = {
|
|
{ICR8600_MODES,Hz(10)},
|
|
{ICR8600_MODES,Hz(100)},
|
|
{ICR8600_MODES,kHz(1)},
|
|
{ICR8600_MODES,Hz(2500)},
|
|
{ICR8600_MODES,Hz(3125)},
|
|
{ICR8600_MODES,kHz(5)},
|
|
{ICR8600_MODES,kHz(6.25)},
|
|
{ICR8600_MODES,Hz(8330)},
|
|
{ICR8600_MODES,kHz(9)},
|
|
{ICR8600_MODES,kHz(10)},
|
|
{ICR8600_MODES,kHz(12.5)},
|
|
{ICR8600_MODES,kHz(20)},
|
|
{ICR8600_MODES,kHz(25)},
|
|
{ICR8600_MODES,kHz(100)},
|
|
RIG_TS_END,
|
|
/* programmable tuning step not implemented */
|
|
},
|
|
/* mode/filter list, remember: order matters! */
|
|
.filters = {
|
|
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_RTTY|RIG_MODE_RTTYR, kHz(2.4)},
|
|
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_RTTY|RIG_MODE_RTTYR, kHz(1.9)},
|
|
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_RTTY|RIG_MODE_RTTYR, kHz(6)},
|
|
{RIG_MODE_AM|RIG_MODE_AMS, kHz(6)},
|
|
{RIG_MODE_AM|RIG_MODE_AMS, kHz(2.4)},
|
|
{RIG_MODE_AM|RIG_MODE_AMS, kHz(15)},
|
|
{RIG_MODE_FM, kHz(15)},
|
|
{RIG_MODE_FM, kHz(6)},
|
|
RIG_FLT_END,
|
|
},
|
|
|
|
.str_cal = ICR8600_STR_CAL,
|
|
|
|
.cfgparams = icom_cfg_params,
|
|
|
|
.set_conf = icom_set_conf,
|
|
.get_conf = icom_get_conf,
|
|
|
|
.priv = (void*)&icr8600_priv_caps,
|
|
.rig_init = icom_init,
|
|
.rig_cleanup = icom_cleanup,
|
|
.rig_open = NULL,
|
|
.rig_close = NULL,
|
|
|
|
.set_freq = icom_set_freq,
|
|
.get_freq = icom_get_freq,
|
|
.set_mode = icom_set_mode,
|
|
.get_mode = icom_get_mode,
|
|
.set_vfo = icom_set_vfo,
|
|
.set_ant = icom_set_ant,
|
|
.get_ant = icom_get_ant,
|
|
|
|
.decode_event = icom_decode_event,
|
|
.set_func = icom_set_func,
|
|
.get_func = icom_get_func,
|
|
.set_level = icom_set_level,
|
|
.get_level = icom_get_level,
|
|
.set_parm = icom_set_parm,
|
|
.get_parm = icom_get_parm,
|
|
.get_dcd = icom_get_dcd,
|
|
.set_mem = icom_set_mem,
|
|
.vfo_op = icom_vfo_op,
|
|
.scan = icom_scan,
|
|
.set_ts = icom_set_ts,
|
|
.get_ts = icom_get_ts,
|
|
.set_powerstat = icom_set_powerstat,
|
|
.get_powerstat = icom_get_powerstat,
|
|
.set_ctcss_sql = icom_set_ctcss_sql,
|
|
.get_ctcss_sql = icom_get_ctcss_sql,
|
|
.set_channel = icr8600_set_channel,
|
|
.get_channel = icr8600_get_channel,
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
* icr8600_set_channel
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL, chan!=NULL
|
|
* Derived from IC-R75 set_channel function
|
|
* TODO: adjust to IC-R8600
|
|
*/
|
|
int icr8600_set_channel(RIG *rig, const channel_t *chan)
|
|
{
|
|
unsigned char chanbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
|
|
int chan_len, freq_len, ack_len, retval;
|
|
unsigned char icmode;
|
|
signed char icmode_ext;
|
|
int err;
|
|
|
|
// octets 0,1: group number, bcd
|
|
to_bcd_be(chanbuf, chan->bank_num, 4);
|
|
|
|
// octets 2,3: channel number, bcd
|
|
to_bcd_be(chanbuf+2, chan->channel_num, 4);
|
|
|
|
// octet 4: skip/select
|
|
// hi nibble: skip off, skip or pskip
|
|
// lo nibble: 0-9 scan group
|
|
chanbuf[4] = S_MEM_SKIP_SLCT_OFF;
|
|
if (chan->flags & RIG_CHFLAG_SKIP)
|
|
chanbuf[4] = S_MEM_SKIP_SLCT_ON;
|
|
if (chan->flags & RIG_CHFLAG_PSKIP)
|
|
chanbuf[4] = S_MEM_PSKIP_SLCT_ON;
|
|
chanbuf[4] |= (chan->scan_group & 0x0f);
|
|
|
|
|
|
// octets 5,6,7,8,9: rx frequency
|
|
// IC-R8600 knows only 5 byte len frequencies, as do all Icom memory frequencies, no need to cater for varying lengths
|
|
freq_len = 5;
|
|
to_bcd(chanbuf+5, chan->freq, freq_len*2); // to_bcd needs nibble len
|
|
|
|
// octets 10, 11: rx mode
|
|
err = rig2icom_mode(rig, chan->mode, chan->width, &icmode, &icmode_ext);
|
|
if (err != RIG_OK)
|
|
return err;
|
|
|
|
chanbuf[10] = icmode;
|
|
chanbuf[11] = icmode_ext;
|
|
|
|
// octet 12: duplex setting TODO: fixed at off, I have to better understand channel struct and what I can modify and what not.
|
|
chanbuf[12] = S_MEM_DUP_OFF;
|
|
|
|
// octets 13,14,15,16: offset freq
|
|
to_bcd(chanbuf+13, chan->rptr_offs, 4*2); // to_bcd needs nibble len
|
|
|
|
// octets 17,18: tuning steps
|
|
if (chan->tuning_step > 0) {
|
|
chanbuf[17] = S_MEM_TSTEP_ON;
|
|
int i;
|
|
for (i=0; i<TSLSTSIZ; i++) {
|
|
if (r8600_ts_sc_list[i].ts == chan->tuning_step) {
|
|
chanbuf[18] = r8600_ts_sc_list[i].sc;
|
|
break;
|
|
}
|
|
}
|
|
if (i >= TSLSTSIZ)
|
|
return -RIG_EINVAL; /* not found, unsupported */
|
|
}
|
|
else {
|
|
chanbuf[17] = S_MEM_TSTEP_OFF;
|
|
chanbuf[18] = 0; // docs unclear what is allowed here, test.
|
|
};
|
|
|
|
// octets 19,20: programmable tuning step, 4 dig BCD
|
|
to_bcd_be(chanbuf+19, chan->channel_num, 4);
|
|
|
|
// octet 21: attenuator
|
|
to_bcd_be(chanbuf+21, chan->levels[rig_setting2idx(RIG_LEVEL_ATT)].i, 2);
|
|
|
|
// octet 22: preamp on/off. THis is no level, but an on/off function, need to adjust. TODO
|
|
to_bcd_be(chanbuf+22, chan->levels[rig_setting2idx(RIG_LEVEL_PREAMP)].i, 2);
|
|
|
|
// octet 23: antenna 0,1,2
|
|
to_bcd_be(chanbuf+23,chan->ant,2);
|
|
|
|
// octet 24: IP+ setting, on/off
|
|
if ((chan->funcs & RIG_FUNC_AIP) > 0) // IP+. The tern AIP is slightly misleading, but RIG_FUNC_ is full (32 bit), so I use AIP.
|
|
chanbuf[24] = 0x01;
|
|
else
|
|
chanbuf[24] = 0x00;
|
|
|
|
// octets 25-40: name
|
|
memset(chanbuf+25, 0x20, 16); // space
|
|
snprintf((char *) (chanbuf+25), 17, "%.16s", chan->channel_desc);
|
|
|
|
chan_len = 41;
|
|
|
|
retval = icom_transaction (rig, C_CTL_MEM, S_MEM_CNTNT, chanbuf, chan_len, ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"icom_set_channel: ack NG (%#.2x), "
|
|
"len=%d\n", ackbuf[0],ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* icr8600_get_channel
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL, chan!=NULL
|
|
* TODO: still a WIP --SF
|
|
*/
|
|
int icr8600_get_channel(RIG *rig, channel_t *chan)
|
|
{
|
|
struct icom_priv_data *priv;
|
|
struct rig_state *rs;
|
|
unsigned char chanbuf[24];
|
|
int chan_len, freq_len, retval;
|
|
|
|
rs = &rig->state;
|
|
priv = (struct icom_priv_data*)rs->priv;
|
|
|
|
to_bcd_be(chanbuf,chan->channel_num,4);
|
|
chan_len = 2;
|
|
|
|
freq_len = priv->civ_731_mode ? 4:5;
|
|
|
|
retval = icom_transaction (rig, C_CTL_MEM, S_MEM_CNTNT,
|
|
chanbuf, chan_len, chanbuf, &chan_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
chan->vfo = RIG_VFO_MEM;
|
|
chan->ant = RIG_ANT_NONE;
|
|
chan->freq = 0;
|
|
chan->mode = RIG_MODE_NONE;
|
|
chan->width = RIG_PASSBAND_NORMAL;
|
|
chan->tx_freq = 0;
|
|
chan->tx_mode = RIG_MODE_NONE;
|
|
chan->tx_width = RIG_PASSBAND_NORMAL;
|
|
chan->split = RIG_SPLIT_OFF;
|
|
chan->tx_vfo = RIG_VFO_NONE;
|
|
chan->rptr_shift = RIG_RPT_SHIFT_NONE;
|
|
chan->rptr_offs = 0;
|
|
chan->tuning_step = 0;
|
|
chan->rit = 0;
|
|
chan->xit = 0;
|
|
chan->funcs = 0;
|
|
chan->levels[rig_setting2idx(RIG_LEVEL_PREAMP)].i = 0;
|
|
chan->levels[rig_setting2idx(RIG_LEVEL_ATT)].i = 0;
|
|
chan->levels[rig_setting2idx(RIG_LEVEL_AF)].f = 0;
|
|
chan->levels[rig_setting2idx(RIG_LEVEL_RF)].f = 0;
|
|
chan->levels[rig_setting2idx(RIG_LEVEL_SQL)].f = 0;
|
|
chan->levels[rig_setting2idx(RIG_LEVEL_NR)].f = 0;
|
|
chan->levels[rig_setting2idx(RIG_LEVEL_PBT_IN)].f = 0;
|
|
chan->levels[rig_setting2idx(RIG_LEVEL_PBT_OUT)].f = 0;
|
|
chan->levels[rig_setting2idx(RIG_LEVEL_CWPITCH)].i = 0;
|
|
chan->levels[rig_setting2idx(RIG_LEVEL_AGC)].i = RIG_AGC_OFF;
|
|
chan->ctcss_tone = 0;
|
|
chan->ctcss_sql = 0;
|
|
chan->dcs_code = 0;
|
|
chan->dcs_sql = 0;
|
|
chan->scan_group = 0;
|
|
chan->flags = RIG_CHFLAG_SKIP;
|
|
strcpy(chan->channel_desc, " ");
|
|
|
|
/*
|
|
* freqbuf should contain Cn,Data area
|
|
*/
|
|
if ((chan_len != freq_len+18) && (chan_len != 5)) {
|
|
rig_debug(RIG_DEBUG_ERR,"icr75_get_channel: wrong frame len=%d\n",
|
|
chan_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
/* do this only if not a blank channel */
|
|
if (chan_len != 5) {
|
|
/*
|
|
* from_bcd requires nibble len
|
|
*/
|
|
chan->flags = RIG_CHFLAG_NONE;
|
|
|
|
chan->freq = from_bcd(chanbuf+5, freq_len*2);
|
|
|
|
chan_len = 4+freq_len+1;
|
|
|
|
icom2rig_mode(rig, chanbuf[chan_len], chanbuf[chan_len+1],
|
|
&chan->mode, &chan->width);
|
|
chan_len += 2;
|
|
if (from_bcd_be(chanbuf+chan_len++,2) != 0)
|
|
chan->levels[rig_setting2idx(RIG_LEVEL_ATT)].i = 20;
|
|
if (from_bcd_be(chanbuf+chan_len++,2) != 0)
|
|
chan->levels[rig_setting2idx(RIG_LEVEL_PREAMP)].i = 20;
|
|
chan->ant = from_bcd_be(chanbuf+chan_len++,2);
|
|
strncpy(chan->channel_desc, (char *) (chanbuf+chan_len), 8);
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|