Hamlib/rigs/rs/ek89x.c

636 wiersze
14 KiB
C

/*
* Hamlib R&S EK895/896 backend - main file
* Reused from p2000.c
* Copyright (c) 2022 by Michael Black W9MDB
* Copyright (c) 2018 by Michael Black W9MDB
* Copyright (c) 2009-2010 by Stéphane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
/*
* Looks like the GP2000 could be reused in other rigs so
* we implement that and then the EK89X uses this interface
*/
#include <hamlib/config.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h> /* String function definitions */
#include "hamlib/rig.h"
#include "serial.h"
#include "misc.h"
#include "register.h"
#include "num_stdio.h"
#include "ek89x.h"
#define RESPSZ 64
#define LF "\x0a"
#define CR "\x0d"
#define BOM LF
#define EOM CR
/*
* ek89x
* We assume that rig!=NULL, rig->state!= NULL, data!=NULL, data_len!=NULL
*/
int
ek89x_transaction(RIG *rig, const char *cmd, int cmd_len, char *data,
int *data_len)
{
int retval;
struct rig_state *rs;
rig_debug(RIG_DEBUG_VERBOSE, "%s: len=%d,cmd=%s\n", __func__, cmd_len,
cmd);
rs = &rig->state;
rig_flush(&rs->rigport);
rig_debug(RIG_DEBUG_VERBOSE, "ek89x_transaction: len=%d,cmd=%s\n",
cmd_len, cmd);
retval = write_block(&rs->rigport, (unsigned char *) cmd, cmd_len);
if (retval != RIG_OK)
{
return retval;
}
/* no data expected */
if (!data || !data_len)
{
return RIG_OK;
}
retval = read_string(&rs->rigport, (unsigned char *) data, RESPSZ,
CR, 1, 0, 1);
if (retval < 0)
{
return retval;
}
*data_len = retval;
return RIG_OK;
}
/*
* ek89x_set_freq
* Assumes rig!=NULL
*/
int
ek89x_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
char freqbuf[32];
int retval;
// cppcheck-suppress *
char *fmt = BOM "F%" PRIll EOM;
rig_debug(RIG_DEBUG_VERBOSE, "%s: vfo=%s,freq=%.0f\n", __func__,
rig_strvfo(vfo), freq);
SNPRINTF(freqbuf, sizeof(freqbuf), fmt, (int64_t) freq, (int64_t) freq);
retval = ek89x_transaction(rig, freqbuf, strlen(freqbuf), NULL, NULL);
return retval;
}
/*
* ek89x_get_freq
* Assumes rig!=NULL
*/
int
ek89x_get_freq(RIG *rig, vfo_t vfo, freq_t *freq)
{
char buf[RESPSZ];
int len, retval;
rig_debug(RIG_DEBUG_VERBOSE, "%s: vfo=%s\n", __func__, rig_strvfo(vfo));
#define FREQ_QUERY BOM "F?" EOM
retval =
ek89x_transaction(rig, FREQ_QUERY, strlen(FREQ_QUERY), buf, &len);
if (retval < 0)
{
return retval;
}
retval = (sscanf(buf, "%*cF%" SCNfreq, freq) == 1) ? RIG_OK : -RIG_EPROTO;
return retval;
}
/*
* ek89x_set_mode
* Assumes rig!=NULL
*/
int
ek89x_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
{
char buf[32], *smode;
int retval;
rig_debug(RIG_DEBUG_VERBOSE, "%s: vfo=%s, mode=%s, width=%d\n", __func__,
rig_strvfo(vfo), rig_strvfo(mode), (int)width);
switch (mode)
{
case RIG_MODE_USB:
smode = "15";
break;
case RIG_MODE_LSB:
smode = "16";
break;
case RIG_MODE_ISBUSB:
smode = "17";
break;
case RIG_MODE_ISBLSB:
smode = "18";
break;
default:
return -RIG_EINVAL;
}
SNPRINTF(buf, sizeof(buf), BOM "I%s" EOM, smode);
retval = ek89x_transaction(rig, buf, strlen(buf), NULL, NULL);
if (retval < 0)
{
return retval;
}
if (width == RIG_PASSBAND_NOCHANGE)
{
return retval;
}
if (width == RIG_PASSBAND_NORMAL)
{
width = rig_passband_normal(rig, mode);
}
if (width > 0)
{
if (width <= 150) { width = 1; }
else if (width <= 300) { width = 3; }
else if (width <= 600) { width = 6; }
else if (width <= 1000) { width = 10; }
else if (width <= 1500) { width = 15; }
else if (width <= 2100) { width = 21; }
else if (width <= 2400) { width = 24; }
else if (width <= 2700) { width = 27; }
else if (width <= 3100) { width = 31; }
else if (width <= 4000) { width = 40; }
else if (width <= 4800) { width = 48; }
else if (width <= 6000) { width = 60; }
else if (width <= 8000) { width = 80; }
SNPRINTF(buf, sizeof(buf), BOM "W%d" EOM, (int) width);
retval = ek89x_transaction(rig, buf, strlen(buf), NULL, NULL);
}
return retval;
}
/*
* ek89x_get_mode
* Assumes rig!=NULL
*/
int
ek89x_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width)
{
char buf[RESPSZ];
int buf_len, retval;
int nmode;
char *pmode = "UNKNOWN";
int n;
rig_debug(RIG_DEBUG_VERBOSE, "%s: vfo=%s\n", __func__, rig_strvfo(vfo));
#define DEM_QUERY BOM "I?" EOM
retval =
ek89x_transaction(rig, DEM_QUERY, strlen(DEM_QUERY), buf, &buf_len);
if (retval < 0)
{
return retval;
}
n = sscanf(buf, "%*cI%d", &nmode);
if (n != 1)
{
rig_debug(RIG_DEBUG_ERR, "%s: unable to parse mode from '%s'\n", __func__, buf);
return -RIG_EPROTO;
}
switch (nmode)
{
case 15: pmode = "USB"; break;
case 16: pmode = "LSB"; break;
}
*mode = rig_parse_mode(pmode);
#define BAND_QUERY BOM "FIB?" EOM
retval =
ek89x_transaction(rig, BAND_QUERY, strlen(BAND_QUERY), buf, &buf_len);
if (retval < 0)
{
return retval;
}
int twidth;
sscanf(buf, "%*cFIB%d", &twidth);
if (twidth == 1) { *width = 150; }
else { *width = twidth * 100; }
return retval;
}
#ifdef XXREMOVEDXX
// Not referenced anywhere
int
ek89x_set_func(RIG *rig, vfo_t vfo, setting_t func, int status)
{
char buf[32], *sfunc;
int len, retval;
rig_debug(RIG_DEBUG_VERBOSE, "%s: vfo=%s\n", __func__, rig_strvfo(vfo));
switch (func)
{
case RIG_FUNC_SQL:
sfunc = "SQ00";
break;
default:
return -RIG_EINVAL;
}
SNPRINTF(buf, sizeof(buf), BOM "%s %s" EOM, sfunc, status ? "1" : "0");
retval = ek89x_transaction(rig, buf, strlen(buf), NULL, NULL);
return retval;
}
#endif
#ifdef XXREMOVEDXX
// Not referenced anywhere
int
ek89x_get_func(RIG *rig, vfo_t vfo, setting_t func, int *status)
{
char buf[RESPSZ], *sfunc;
int buf_len, retval;
rig_debug(RIG_DEBUG_VERBOSE, "%s: vfo=%s\n", __func__, rig_strvfo(vfo));
switch (func)
{
case RIG_FUNC_SQL:
sfunc = BOM "SQ00?" EOM;
break;
default:
return -RIG_EINVAL;
}
retval = ek89x_transaction(rig, sfunc, strlen(sfunc), buf, &buf_len);
if (retval < 0)
{
return retval;
}
// we expected LF+"X" where X is the status
*status = buf[2] == 1 ? 1 : 0;
return retval;
}
#endif
int
ek89x_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val)
{
char buf[64];
int retval;
rig_debug(RIG_DEBUG_VERBOSE, "%s: vfo=%s\n", __func__, rig_strvfo(vfo));
switch (level)
{
case RIG_LEVEL_PREAMP:
SNPRINTF(buf, sizeof(buf), BOM "PA%d" EOM, (int)val.f);
break;
default:
return -RIG_EINVAL;
}
retval = ek89x_transaction(rig, buf, strlen(buf), NULL, NULL);
return retval;
}
int
ek89x_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val)
{
char buf[RESPSZ], *slevel;
int buf_len, retval, ival;
rig_debug(RIG_DEBUG_VERBOSE, "%s: vfo=%s\n", __func__, rig_strvfo(vfo));
switch (level)
{
case RIG_LEVEL_PREAMP:
slevel = BOM "PA?" EOM;
break;
case RIG_LEVEL_STRENGTH:
slevel = BOM "L?" EOM;
break;
default:
return -RIG_EINVAL;
}
retval = ek89x_transaction(rig, slevel, strlen(slevel), buf, &buf_len);
if (retval < 0)
{
return retval;
}
switch (level)
{
case RIG_LEVEL_PREAMP:
if (num_sscanf(buf, "%*cPA%d", &ival) != 1)
{
return -RIG_EPROTO;
}
val->f = ival;
break;
case RIG_LEVEL_STRENGTH:
if (num_sscanf(buf, "%*cL%d", &ival) != 1)
{
return -RIG_EPROTO;
}
val->f = ival - 34; // approximately
break;
default:
return -RIG_EINVAL;
}
return retval;
}
const char *
ek89x_get_info(RIG *rig)
{
static char infobuf[128];
int info_len, retval;
int addr = -1;
char type[32] = "unk type";
char rigid[32] = "unk rigid";
char sernum[32] = "unk sernum";
char *p;
rig_debug(RIG_DEBUG_VERBOSE, "%s\n", __func__);
#define ID_QUERY BOM "IDENT?" EOM
retval =
ek89x_transaction(rig, ID_QUERY, strlen(ID_QUERY), infobuf, &info_len);
if (retval < 0)
{
return NULL;
}
p = strtok(infobuf, ",");
while (p)
{
switch (p[0])
{
case 0x0a:
sscanf(p, "%*cIDENT%31s", type);
break;
case 'i':
sscanf(p, "id%31s", rigid);
break;
case 's':
sscanf(p, "sn%31s", sernum);
break;
default:
printf("Unknown response: %s\n", p);
}
p = strtok(NULL, ",");
}
SNPRINTF(infobuf, sizeof(infobuf), "ADDR=%02d\nTYPE=%s\nSER#=%s\nID =%s\n",
addr, type, sernum, rigid);
return infobuf;
}
#define EK89X_MODES (RIG_MODE_USB|RIG_MODE_LSB)
#define EK89X_FUNC (RIG_FUNC_SQL)
#define EK89X_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_STRENGTH)
#define EK89X_PARM_ALL (RIG_PARM_NONE)
#define EK89X_VFO (RIG_VFO_A)
#define EK89X_VFO_OPS (RIG_OP_NONE)
#define EK89X_ANTS (RIG_ANT_1)
#define EK89X_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.width = 1, \
.ant = 1, \
.funcs = EK89X_FUNC, \
.levels = RIG_LEVEL_SET(EK89X_LEVEL_ALL), \
.channel_desc=1, \
.flags = RIG_CHFLAG_SKIP, \
}
/*
* EK89X rig capabilities.
*
* Had to use NONE for flow control and set RTS high
* We are not using address mode since we're on RS232 for now
* If using RS485 should add address capability
*
* TODO
* - set/get_channels
*/
const struct rig_caps ek89x_caps =
{
RIG_MODEL(RIG_MODEL_EK89X),
.model_name = "EK895/6",
.mfg_name = "Rohde&Schwarz",
.version = "20220813.0",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
// Need to set RTS on for some reason
// And HANDSHAKE_NONE even though HARDWARE is what is called for
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 9600,
.serial_rate_max = 38400,
.serial_data_bits = 7,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_ODD,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = EK89X_FUNC,
.has_set_func = EK89X_FUNC,
.has_get_level = EK89X_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(EK89X_LEVEL_ALL),
.has_get_parm = EK89X_PARM_ALL,
.has_set_parm = RIG_PARM_SET(EK89X_PARM_ALL),
.level_gran = {},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = {RIG_DBLST_END},
.attenuator = {32, RIG_DBLST_END},
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 7, /* FIXME */
//.vfo_ops = XK2100_VFO_OPS,
.chan_list = {
{0, 999, RIG_MTYPE_MEM, EK89X_MEM_CAP},
RIG_CHAN_END,
},
.rx_range_list1 = {
{
kHz(0), MHz(30), EK89X_MODES, -1, -1, EK89X_VFO,
EK89X_ANTS
},
RIG_FRNG_END,
},
.tx_range_list1 = {RIG_FRNG_END,},
.rx_range_list2 = {
{
kHz(0), MHz(30), EK89X_MODES, -1, -1, EK89X_VFO,
EK89X_ANTS
},
RIG_FRNG_END,
},
.tx_range_list2 = {RIG_FRNG_END,},
/*
.tuning_steps = {
{EK89X_MODES,1},
{EK89X_MODES,10},
{EK89X_MODES,100},
{EK89X_MODES,1000},
RIG_TS_END,
},
*/
/* mode/filter list, remember: order matters! */
.filters = {
{EK89X_MODES, kHz(8.0)},
{EK89X_MODES, kHz(6.0)},
{EK89X_MODES, Hz(4.8)},
{EK89X_MODES, Hz(4.0)},
{EK89X_MODES, Hz(3.1)},
{EK89X_MODES, kHz(2.7)},
{EK89X_MODES, kHz(2.4)},
{EK89X_MODES, kHz(1.5)},
{EK89X_MODES, kHz(1.0)},
{EK89X_MODES, Hz(600)},
{EK89X_MODES, Hz(300)},
{EK89X_MODES, Hz(150)},
RIG_FLT_END,
},
.priv = NULL,
// .set_ptt = ek89x_set_ptt, receiver only
// .get_ptt = ek89x_get_ptt, receiver only
.set_freq = ek89x_set_freq,
.get_freq = ek89x_get_freq,
.set_mode = ek89x_set_mode,
.get_mode = ek89x_get_mode,
.set_level = ek89x_set_level,
.get_level = ek89x_get_level,
//.set_func = ek89x_set_func,
//.get_func = ek89x_get_func,
.get_info = ek89x_get_info,
#if 0
/* TODO */
.rig_open = ek89x_rig_open,
.set_channel = ek89x_set_channel,
.get_channel = ek89x_get_channel,
#endif
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};