kopia lustrzana https://github.com/Hamlib/Hamlib
265 wiersze
9.0 KiB
C
265 wiersze
9.0 KiB
C
/*
|
|
* Hamlib CI-V backend - description of IC-R8600
|
|
* Copyright (c) 2000-2004 by Stephane Fillod
|
|
* Copyright (c) 2018 by Ekki Plicht
|
|
* Copyright (c) 2019 by Malcolm Herring
|
|
*
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with this library; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
#include "config.h"
|
|
#endif
|
|
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
|
|
#include "hamlib/rig.h"
|
|
#include "misc.h"
|
|
#include "idx_builtin.h"
|
|
#include "token.h"
|
|
|
|
#include "icom.h"
|
|
#include "icom_defs.h"
|
|
#include "frame.h"
|
|
|
|
#define ICR8600_MODES (RIG_MODE_LSB|RIG_MODE_USB|RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_RTTY|\
|
|
RIG_MODE_FM|RIG_MODE_WFM|RIG_MODE_CWR|RIG_MODE_RTTYR|RIG_MODE_SAM|RIG_MODE_SAL|\
|
|
RIG_MODE_SAH|RIG_MODE_P25|RIG_MODE_DSTAR|RIG_MODE_DPMR|RIG_MODE_NXDNVN|\
|
|
RIG_MODE_NXDN_N|RIG_MODE_DCR)
|
|
|
|
#define ICR8600_FUNC_ALL (RIG_FUNC_NB|RIG_FUNC_ANF|RIG_FUNC_MN|RIG_FUNC_AFC|\
|
|
RIG_FUNC_NR|RIG_FUNC_AIP|RIG_FUNC_LOCK|RIG_FUNC_VSC|RIG_FUNC_RESUME|RIG_FUNC_TSQL|\
|
|
RIG_FUNC_CSQL|RIG_FUNC_DSQL)
|
|
|
|
#define ICR8600_LEVEL_ALL (RIG_LEVEL_ATT|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_SQL|\
|
|
RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_PREAMP|\
|
|
RIG_LEVEL_AGC|RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH)
|
|
|
|
#define ICR8600_PARM_ALL (RIG_PARM_BACKLIGHT|RIG_PARM_BEEP|RIG_PARM_TIME|RIG_PARM_KEYLIGHT)
|
|
|
|
#define ICR8600_VFO_ALL (RIG_VFO_VFO|RIG_VFO_MEM)
|
|
|
|
#define ICR8600_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
|
|
|
|
#define ICR8600_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_SLCT|\
|
|
RIG_SCAN_PRIO|RIG_SCAN_PRIO|RIG_SCAN_DELTA|RIG_SCAN_STOP)
|
|
|
|
#define ICR8600_ANTS_HF (RIG_ANT_1|RIG_ANT_2|RIG_ANT_3)
|
|
#define ICR8600_ANTS_VHF (RIG_ANT_1)
|
|
|
|
#define ICR8600_STR_CAL { 2, {\
|
|
{ 0, -60 }, \
|
|
{ 255, 60 }, \
|
|
} }
|
|
|
|
struct cmdparams icr8600_extcmds[] =
|
|
{
|
|
{ {.s = RIG_PARM_BEEP}, CMD_PARAM_TYPE_PARM, C_CTL_MEM, S_MEM_PARM, SC_MOD_RW, 2, {0x00, 0x38}, CMD_DAT_BOL, 1 },
|
|
{ {.s = RIG_PARM_BACKLIGHT}, CMD_PARAM_TYPE_PARM, C_CTL_MEM, S_MEM_PARM, SC_MOD_RW, 2, {0x01, 0x15}, CMD_DAT_LVL, 2 },
|
|
{ {.s = RIG_PARM_KEYLIGHT}, CMD_PARAM_TYPE_PARM, C_CTL_MEM, S_MEM_PARM, SC_MOD_RW, 2, {0x01, 0x16}, CMD_DAT_LVL, 2 },
|
|
{ {.s = RIG_PARM_TIME}, CMD_PARAM_TYPE_PARM, C_CTL_MEM, S_MEM_PARM, SC_MOD_RW, 2, {0x01, 0x32}, CMD_DAT_TIM, 2 },
|
|
{ {.s = RIG_PARM_NONE} }
|
|
};
|
|
|
|
int icr8600_tokens[] = { TOK_DSTAR_DSQL, TOK_DSTAR_CALL_SIGN, TOK_DSTAR_MESSAGE, TOK_DSTAR_STATUS,
|
|
TOK_DSTAR_GPS_DATA, TOK_DSTAR_GPS_MESS, TOK_DSTAR_CODE, TOK_DSTAR_TX_DATA,
|
|
TOK_SCOPE_DAT, TOK_SCOPE_STS, TOK_SCOPE_DOP, TOK_SCOPE_MSS, TOK_SCOPE_MOD, TOK_SCOPE_SPN,
|
|
TOK_SCOPE_HLD, TOK_SCOPE_REF, TOK_SCOPE_SWP, TOK_SCOPE_TYP, TOK_SCOPE_VBW, TOK_SCOPE_FEF,
|
|
TOK_BACKEND_NONE
|
|
};
|
|
|
|
/*
|
|
* channel caps.
|
|
*/
|
|
#define ICR8600_MEM_CAP { \
|
|
.freq = 1, \
|
|
.mode = 1, \
|
|
.width = 1, \
|
|
.ant = 1, \
|
|
.levels = RIG_LEVEL_ATT|RIG_LEVEL_PREAMP, \
|
|
.channel_desc = 1, \
|
|
.flags = 1, \
|
|
}
|
|
|
|
static struct icom_priv_caps icr8600_priv_caps =
|
|
{
|
|
0x96, /* default address */
|
|
0, /* 731 mode */
|
|
0, /* no XCHG */
|
|
r8600_ts_sc_list, /* list of tuning steps */
|
|
.antack_len = 2,
|
|
.ant_count = 3,
|
|
.offs_len = 4, /* Repeater offset is 4 bytes */
|
|
.serial_USB_echo_check = 1, /* USB CI-V may not echo */
|
|
.extcmds = icr8600_extcmds /* Custom ext_cmd parameters */
|
|
};
|
|
|
|
const struct rig_caps icr8600_caps =
|
|
{
|
|
RIG_MODEL(RIG_MODEL_ICR8600),
|
|
.model_name = "IC-R8600",
|
|
.mfg_name = "Icom",
|
|
.version = BACKEND_VER ".0",
|
|
.copyright = "LGPL",
|
|
.status = RIG_STATUS_ALPHA,
|
|
.rig_type = RIG_TYPE_RECEIVER,
|
|
.ptt_type = RIG_PTT_NONE,
|
|
.dcd_type = RIG_DCD_RIG,
|
|
.port_type = RIG_PORT_SERIAL,
|
|
.serial_rate_min = 300,
|
|
.serial_rate_max = 115200,
|
|
.serial_data_bits = 8,
|
|
.serial_stop_bits = 1,
|
|
.serial_parity = RIG_PARITY_NONE,
|
|
.serial_handshake = RIG_HANDSHAKE_NONE,
|
|
.write_delay = 0,
|
|
.post_write_delay = 1,
|
|
.timeout = 1000,
|
|
.retry = 3,
|
|
.has_get_func = ICR8600_FUNC_ALL,
|
|
.has_set_func = ICR8600_FUNC_ALL,
|
|
.has_get_level = ICR8600_LEVEL_ALL,
|
|
.has_set_level = RIG_LEVEL_SET(ICR8600_LEVEL_ALL),
|
|
.has_get_parm = ICR8600_PARM_ALL,
|
|
.has_set_parm = RIG_PARM_SET(ICR8600_PARM_ALL),
|
|
// cppcheck-suppress *
|
|
.level_gran = { [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } } },
|
|
.parm_gran = { [PARM_TIME] = { .min = { .i = 0 }, .max = { .i = 86399} } },
|
|
.ext_tokens = icr8600_tokens,
|
|
.extlevels = icom_ext_levels,
|
|
.extfuncs = icom_ext_funcs,
|
|
.extparms = icom_ext_parms,
|
|
.ctcss_list = common_ctcss_list,
|
|
.dcs_list = common_dcs_list,
|
|
.preamp = { 20, RIG_DBLST_END, }, /* 20 on HF, 14 on VHF, UHF, same setting */
|
|
.attenuator = { 10, 20, 30, RIG_DBLST_END, },
|
|
.max_rit = Hz(0),
|
|
.max_xit = Hz(0),
|
|
.max_ifshift = Hz(0),
|
|
.targetable_vfo = 0,
|
|
.vfo_ops = ICR8600_VFO_OPS,
|
|
.scan_ops = ICR8600_SCAN_OPS,
|
|
.transceive = RIG_TRN_RIG,
|
|
.bank_qty = 100,
|
|
.chan_desc_sz = 16,
|
|
|
|
.chan_list = {
|
|
{ 0, 99, RIG_MTYPE_MEM, ICR8600_MEM_CAP },
|
|
{ 0, 99, RIG_MTYPE_EDGE, ICR8600_MEM_CAP },
|
|
/* to be extended */
|
|
RIG_CHAN_END,
|
|
},
|
|
|
|
.rx_range_list1 = {
|
|
{ kHz(10), MHz(3000), ICR8600_MODES, -1, -1, ICR8600_VFO_ALL, ICR8600_ANTS_VHF },
|
|
{ kHz(10), MHz(30), ICR8600_MODES, -1, -1, ICR8600_VFO_ALL, ICR8600_ANTS_HF },
|
|
RIG_FRNG_END,
|
|
},
|
|
|
|
.tx_range_list1 = { RIG_FRNG_END, },
|
|
|
|
.rx_range_list2 = {
|
|
{ kHz(10), MHz(3000), ICR8600_MODES, -1, -1, ICR8600_VFO_ALL, ICR8600_ANTS_VHF },
|
|
{ kHz(10), MHz(30), ICR8600_MODES, -1, -1, ICR8600_VFO_ALL, ICR8600_ANTS_HF },
|
|
RIG_FRNG_END,
|
|
},
|
|
|
|
.tx_range_list2 = { RIG_FRNG_END, },
|
|
|
|
.tuning_steps = {
|
|
{ICR8600_MODES, Hz(100)},
|
|
{ICR8600_MODES, kHz(1)},
|
|
{ICR8600_MODES, kHz(2.5)},
|
|
{ICR8600_MODES, kHz(3.125)},
|
|
{ICR8600_MODES, kHz(5)},
|
|
{ICR8600_MODES, kHz(6.25)},
|
|
{ICR8600_MODES, kHz(8.33)},
|
|
{ICR8600_MODES, kHz(9)},
|
|
{ICR8600_MODES, kHz(10)},
|
|
{ICR8600_MODES, kHz(12.5)},
|
|
{ICR8600_MODES, kHz(20)},
|
|
{ICR8600_MODES, kHz(25)},
|
|
{ICR8600_MODES, kHz(100)},
|
|
RIG_TS_END,
|
|
},
|
|
|
|
/* mode/filter list, remember: order matters! */
|
|
.filters = {
|
|
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(2.4)},
|
|
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(1.9)},
|
|
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(6)},
|
|
{RIG_MODE_AM | RIG_MODE_AMS, kHz(6)},
|
|
{RIG_MODE_AM | RIG_MODE_AMS, kHz(2.4)},
|
|
{RIG_MODE_AM | RIG_MODE_AMS, kHz(15)},
|
|
{RIG_MODE_FM, kHz(15)},
|
|
{RIG_MODE_FM, kHz(6)},
|
|
RIG_FLT_END,
|
|
},
|
|
|
|
.str_cal = ICR8600_STR_CAL,
|
|
|
|
.cfgparams = icom_cfg_params,
|
|
|
|
.set_conf = icom_set_conf,
|
|
.get_conf = icom_get_conf,
|
|
.set_powerstat = icom_set_powerstat,
|
|
.get_powerstat = icom_get_powerstat,
|
|
|
|
.priv = (void *)& icr8600_priv_caps,
|
|
.rig_init = icom_init,
|
|
.rig_cleanup = icom_cleanup,
|
|
.rig_open = icom_rig_open,
|
|
.rig_close = icom_rig_close,
|
|
|
|
.set_freq = icom_set_freq,
|
|
.get_freq = icom_get_freq,
|
|
.set_mode = icom_set_mode,
|
|
.get_mode = icom_get_mode,
|
|
.set_vfo = icom_set_vfo,
|
|
.set_bank = icom_set_bank,
|
|
.get_rptr_offs = icom_get_rptr_offs,
|
|
.set_rptr_offs = icom_set_rptr_offs,
|
|
.get_rptr_shift = icom_get_rptr_shift,
|
|
.set_rptr_shift = icom_set_rptr_shift,
|
|
.set_ant = icom_set_ant,
|
|
.get_ant = icom_get_ant,
|
|
|
|
.decode_event = icom_decode_event,
|
|
.set_func = icom_set_func,
|
|
.get_func = icom_get_func,
|
|
.set_level = icom_set_level,
|
|
.get_level = icom_get_level,
|
|
.set_parm = icom_set_parm,
|
|
.get_parm = icom_get_parm,
|
|
.set_ext_parm = icom_set_ext_parm,
|
|
.get_ext_parm = icom_get_ext_parm,
|
|
.set_ext_func = icom_set_ext_func,
|
|
.get_ext_func = icom_get_ext_func,
|
|
.get_dcd = icom_get_dcd,
|
|
.set_mem = icom_set_mem,
|
|
.vfo_op = icom_vfo_op,
|
|
.scan = icom_scan,
|
|
.set_ts = icom_set_ts,
|
|
.get_ts = icom_get_ts,
|
|
.set_ctcss_sql = icom_set_ctcss_sql,
|
|
.get_ctcss_sql = icom_get_ctcss_sql,
|
|
.set_dcs_sql = icom_set_dcs_sql,
|
|
.get_dcs_sql = icom_get_dcs_sql,
|
|
|
|
};
|