Hamlib/aor/ar5000.c

475 wiersze
13 KiB
C

/*
* Hamlib AOR backend - AR5000 description
*
* Copyright (c) 2000-2008 by Stephane Fillod
*
* $Id: ar5000.c,v 1.12 2008-04-11 17:10:45 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdio.h>
#include <string.h>
#include <hamlib/rig.h>
#include "aor.h"
#define AR5000_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM| \
RIG_MODE_WFM|RIG_MODE_SAM|RIG_MODE_SAL|RIG_MODE_SAH)
#define AR5000_FUNC_ALL (RIG_FUNC_TSQL | RIG_FUNC_ABM)
#define AR5000_LEVEL (RIG_LEVEL_ATT | RIG_LEVEL_AGC | RIG_LEVEL_RAWSTR)
#define AR5000_PARM (RIG_PARM_NONE)
#define AR5000_VFO_OPS (RIG_OP_MCL | RIG_OP_UP | RIG_OP_DOWN)
#define AR5000_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_PROG|RIG_SCAN_SLCT)
#define AR5000_VFO (RIG_VFO_A | RIG_VFO_B | RIG_VFO_C | RIG_VFO_N(3) | RIG_VFO_N(4))
/* As reported with rigctl 'l RAWSTR' for AR5000A S/n: 171218
on 7040kHz / CW / 3kHz Bw.
The data available on http://www.aoruk.com did not match very well on HF */
#define AR5000_STR_CAL { 16, { \
{ 0, -60 }, \
{ 3, -48 }, \
{ 14, -42 }, \
{ 26, -36 }, \
{ 34, -30 }, \
{ 42, -24 }, \
{ 52, -18 }, \
{ 62, -12 }, \
{ 74, -6 }, \
{ 87, 0 }, \
{ 101, 10 }, \
{ 117, 20 }, \
{ 135, 30 }, \
{ 152, 40 }, \
{ 202, 50 }, \
{ 255, 60 }, \
} }
#define AR5000_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.width = 1, \
.bank_num = 1, \
.tuning_step = 1, \
.channel_desc = 1, \
.flags = 1, \
.levels = RIG_LEVEL_ATT | RIG_LEVEL_AGC, \
.funcs = RIG_FUNC_ABM, \
}
static int format5k_mode(RIG *rig, char *buf, rmode_t mode, pbwidth_t width);
static int parse5k_aor_mode(RIG *rig, char aormode, char aorwidth, rmode_t *mode, pbwidth_t *width);
static const struct aor_priv_caps ar5k_priv_caps = {
.format_mode = format5k_mode,
.parse_aor_mode = parse5k_aor_mode,
.bank_base1 = '0',
.bank_base2 = '0',
};
/*
* ar5000 rig capabilities.
* Notice that some rigs share the same functions.
* Also this struct is READONLY!
*
* part of info from http://www.aoruk.com/5000.htm
*
* TODO: retrieve BW info, and rest of commands
*/
const struct rig_caps ar5000_caps = {
.rig_model = RIG_MODEL_AR5000,
.model_name = "AR5000",
.mfg_name = "AOR",
.version = BACKEND_VER,
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_SCANNER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_XONXOFF,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = AR5000_FUNC_ALL,
.has_get_level = AR5000_LEVEL,
.has_set_level = RIG_LEVEL_SET(AR5000_LEVEL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.ctcss_list = NULL, /* FIXME: CTCSS list */
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { 10, 20, RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_RIG,
.bank_qty = 10,
.chan_desc_sz = 8,
.vfo_ops = AR5000_VFO_OPS,
.scan_ops = AR5000_SCAN_OPS,
.str_cal = AR5000_STR_CAL,
.chan_list = {
{ 0, 999, RIG_MTYPE_MEM, AR5000_MEM_CAP },
RIG_CHAN_END, },
.rx_range_list1 = {
{kHz(10),MHz(2600),AR5000_MODES,-1,-1,AR5000_VFO},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(10),MHz(2600),AR5000_MODES,-1,-1,AR5000_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list2 = { RIG_FRNG_END, }, /* no tx range, this is a scanner! */
.tuning_steps = {
{AR5000_MODES,1},
{AR5000_MODES,10},
{AR5000_MODES,50},
{AR5000_MODES,100},
{AR5000_MODES,500},
{AR5000_MODES,kHz(1)},
{AR5000_MODES,kHz(5)},
{AR5000_MODES,kHz(6.25)},
{AR5000_MODES,kHz(9)},
{AR5000_MODES,kHz(10)},
{AR5000_MODES,kHz(12.5)},
{AR5000_MODES,kHz(20)},
{AR5000_MODES,kHz(25)},
{AR5000_MODES,kHz(30)},
{AR5000_MODES,kHz(50)},
{AR5000_MODES,kHz(100)},
{AR5000_MODES,kHz(500)},
#if 0
{AR5000_MODES,0}, /* any tuning step */
#endif
RIG_TS_END,
},
/* mode/filter list, .remember = order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_SAL|RIG_MODE_SAH|RIG_MODE_CW, kHz(3)},
{RIG_MODE_CW, Hz(500)}, /* narrow */
{RIG_MODE_AM|RIG_MODE_SAM, kHz(6)},
{RIG_MODE_AM|RIG_MODE_SAM, kHz(3)}, /* narrow */
{RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_SAM, kHz(15)},
{RIG_MODE_FM, kHz(6)}, /* narrow */
{RIG_MODE_FM, kHz(30)}, /* wide */
{RIG_MODE_WFM, kHz(110)},
{RIG_MODE_WFM, kHz(30)}, /* narrow */
{RIG_MODE_WFM, kHz(220)}, /* wide */
RIG_FLT_END,
},
.priv = (void*)&ar5k_priv_caps,
.rig_init = NULL,
.rig_cleanup = NULL,
.rig_open = NULL,
.rig_close = aor_close,
.set_freq = aor_set_freq,
.get_freq = aor_get_freq,
.set_mode = aor_set_mode,
.get_mode = aor_get_mode,
.set_vfo = aor_set_vfo,
.get_vfo = aor_get_vfo,
.set_level = aor_set_level,
.get_level = aor_get_level,
.get_dcd = aor_get_dcd,
.set_ts = aor_set_ts,
.set_powerstat = aor_set_powerstat,
.vfo_op = aor_vfo_op,
.scan = aor_scan,
.get_info = aor_get_info,
.set_mem = aor_set_mem,
.get_mem = aor_get_mem,
.set_bank = aor_set_bank,
.set_channel = aor_set_channel,
.get_channel = aor_get_channel,
.get_chan_all_cb = aor_get_chan_all_cb,
};
/*
* ar5000a rig capabilities.
* Notice that some rigs share the same functions.
* Also this struct is READONLY!
*
* part of info from http://www.aoruk.com/5000.htm
*
* TODO: retrieve BW info, and rest of commands
*/
const struct rig_caps ar5000a_caps = {
.rig_model = RIG_MODEL_AR5000A,
.model_name = "AR5000A",
.mfg_name = "AOR",
.version = BACKEND_VER,
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_SCANNER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_XONXOFF,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = AR5000_FUNC_ALL,
.has_get_level = AR5000_LEVEL,
.has_set_level = RIG_LEVEL_SET(AR5000_LEVEL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.ctcss_list = NULL, /* FIXME: CTCSS list */
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { 10, 20, RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_RIG,
.bank_qty = 10,
.chan_desc_sz = 8,
.vfo_ops = AR5000_VFO_OPS,
.scan_ops = AR5000_SCAN_OPS,
.str_cal = AR5000_STR_CAL,
.chan_list = {
{ 0, 999, RIG_MTYPE_MEM, AR5000_MEM_CAP },
RIG_CHAN_END, },
.rx_range_list1 = {
{kHz(10),MHz(3000),AR5000_MODES,-1,-1,AR5000_VFO},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(10),MHz(3000),AR5000_MODES,-1,-1,AR5000_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list2 = { RIG_FRNG_END, }, /* no tx range, this is a scanner! */
.tuning_steps = {
{AR5000_MODES,1},
{AR5000_MODES,10},
{AR5000_MODES,50},
{AR5000_MODES,100},
{AR5000_MODES,500},
{AR5000_MODES,kHz(1)},
{AR5000_MODES,kHz(5)},
{AR5000_MODES,kHz(6.25)},
{AR5000_MODES,kHz(9)},
{AR5000_MODES,kHz(10)},
{AR5000_MODES,kHz(12.5)},
{AR5000_MODES,kHz(20)},
{AR5000_MODES,kHz(25)},
{AR5000_MODES,kHz(30)},
{AR5000_MODES,kHz(50)},
{AR5000_MODES,kHz(100)},
{AR5000_MODES,kHz(500)},
#if 0
{AR5000_MODES,0}, /* any tuning step */
#endif
RIG_TS_END,
},
/* mode/filter list, .remember = order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_SAL|RIG_MODE_SAH|RIG_MODE_CW, kHz(3)},
{RIG_MODE_CW, Hz(500)}, /* narrow */
{RIG_MODE_AM|RIG_MODE_SAM, kHz(6)},
{RIG_MODE_AM|RIG_MODE_SAM, kHz(3)}, /* narrow */
{RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_SAM, kHz(15)},
{RIG_MODE_FM, kHz(6)}, /* narrow */
{RIG_MODE_FM, kHz(30)}, /* wide */
{RIG_MODE_WFM, kHz(110)},
{RIG_MODE_WFM, kHz(30)}, /* narrow */
{RIG_MODE_WFM, kHz(220)}, /* wide */
RIG_FLT_END,
},
.priv = (void*)&ar5k_priv_caps,
.rig_init = NULL,
.rig_cleanup = NULL,
.rig_open = NULL,
.rig_close = aor_close,
.set_freq = aor_set_freq,
.get_freq = aor_get_freq,
.set_mode = aor_set_mode,
.get_mode = aor_get_mode,
.set_vfo = aor_set_vfo,
.get_vfo = aor_get_vfo,
.set_level = aor_set_level,
.get_level = aor_get_level,
.get_dcd = aor_get_dcd,
.set_ts = aor_set_ts,
.set_powerstat = aor_set_powerstat,
.vfo_op = aor_vfo_op,
.scan = aor_scan,
.get_info = aor_get_info,
.set_mem = aor_set_mem,
.get_mem = aor_get_mem,
.set_bank = aor_set_bank,
.set_channel = aor_set_channel,
.get_channel = aor_get_channel,
.get_chan_all_cb = aor_get_chan_all_cb,
};
/*
* Function definitions below
*/
/*
* modes in use by the "MD" command of AR5000
*/
#define AR5K_FM '0'
#define AR5K_AM '1'
#define AR5K_LSB '2'
#define AR5K_USB '3'
#define AR5K_CW '4'
#define AR5K_SAM '5'
#define AR5K_SAL '6'
#define AR5K_SAH '7'
int format5k_mode(RIG *rig, char *buf, rmode_t mode, pbwidth_t width)
{
int aormode, aorwidth;
switch (mode) {
case RIG_MODE_AM: aormode = AR5K_AM; break;
case RIG_MODE_WFM:
case RIG_MODE_FM: aormode = AR5K_FM; break;
case RIG_MODE_LSB: aormode = AR5K_LSB; break;
case RIG_MODE_SSB:
case RIG_MODE_USB: aormode = AR5K_USB; break;
case RIG_MODE_CW: aormode = AR5K_CW; break;
case RIG_MODE_SAM: aormode = AR5K_SAM; break;
case RIG_MODE_SAL: aormode = AR5K_SAL; break;
case RIG_MODE_SAH: aormode = AR5K_SAH; break;
default:
rig_debug(RIG_DEBUG_ERR,"%s: unsupported mode %d\n",
__FUNCTION__, mode);
return -RIG_EINVAL;
}
if (width == RIG_PASSBAND_NORMAL)
width = rig_passband_normal(rig, mode);
switch (width) {
case 500: aorwidth = '0'; break;
case s_kHz(3): aorwidth = '1'; break;
case s_kHz(6): aorwidth = '2'; break;
case s_kHz(15): aorwidth = '3'; break;
case s_kHz(30): aorwidth = '4'; break;
case s_kHz(110): aorwidth = '5'; break;
case s_kHz(220): aorwidth = '6'; break;
default:
rig_debug(RIG_DEBUG_ERR,"%s: unsupported width %d\n",
__FUNCTION__, width);
return -RIG_EINVAL;
}
return sprintf(buf, "MD%c BW%c", aormode, aorwidth);
}
int parse5k_aor_mode(RIG *rig, char aormode, char aorwidth, rmode_t *mode, pbwidth_t *width)
{
switch (aormode) {
case AR5K_FM: *mode = RIG_MODE_FM; break;
case AR5K_AM: *mode = RIG_MODE_AM; break;
case AR5K_LSB: *mode = RIG_MODE_LSB; break;
case AR5K_USB: *mode = RIG_MODE_USB; break;
case AR5K_CW: *mode = RIG_MODE_CW; break;
case AR5K_SAM: *mode = RIG_MODE_SAM; break;
case AR5K_SAL: *mode = RIG_MODE_SAL; break;
case AR5K_SAH: *mode = RIG_MODE_SAH; break;
default:
rig_debug(RIG_DEBUG_ERR,"%s: unsupported mode '%c'\n",
__FUNCTION__, aormode);
return -RIG_EPROTO;
}
switch (aorwidth) {
case '0': *width = 500; break;
case '1': *width = s_kHz(3); break;
case '2': *width = s_kHz(6); break;
case '3': *width = s_kHz(15); break;
case '4': *width = s_kHz(30); break;
case '5': *width = s_kHz(110); break;
case '6': *width = s_kHz(220); break;
default:
rig_debug(RIG_DEBUG_ERR,"%s: unsupported width %d\n",
__FUNCTION__, aorwidth);
return -RIG_EPROTO;
}
return RIG_OK;
}