Hamlib/rigs/kit/si570avrusb.h

64 wiersze
2.0 KiB
C

/***
* SoftRock USB I2C host control program
* Copyright (C) 2009 Andrew Nilsson (andrew.nilsson@gmail.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Based on powerSwitch.c by Christian Starkjohann,
* and usbtemp.c by Mathias Dalheimer
* of Objective Development Software GmbH (2005)
* (see http://www.obdev.at/avrusb)
*
*/
#ifndef _SI570AVRUSB_H
#define _SI570AVRUSB_H 1
/* DG8SAQ specific values */
#define SI570_I2C_ADDR 0x55
#define SI570_DCO_HIGH 5670.0
#define SI570_DCO_LOW 4850.0
#define SI570_NOMINAL_XTALL_FREQ 114.285
#define SI570_XTALL_DEVIATION_PPM 2000
#define SI570_DEFAULT_STARTUP_FREQ 56.32
#define REQUEST_READ_VERSION 0x00
#define REQUEST_SET_DDRB 0x01
#define REQUEST_SET_PORTB 0x04
#define REQUEST_READ_EEPROM 0x11
#define REQUEST_FILTERS 0x17
#define REQUEST_SET_FREQ 0x30
#define REQUEST_SET_FREQ_BY_VALUE 0x32
#define REQUEST_SET_XTALL_FREQ 0x33
#define REQUEST_SET_STARTUP_FREQ 0x34
#define REQUEST_READ_MULTIPLY_LO 0x39
#define REQUEST_READ_FREQUENCY 0x3A
#define REQUEST_READ_SMOOTH_TUNE_PPM 0x3B
#define REQUEST_READ_STARTUP 0x3C
#define REQUEST_READ_XTALL 0x3D
#define REQUEST_READ_REGISTERS 0x3F
//#define REQUEST_SET_STARTUP_FREQ 0x41
#define REQUEST_SET_PTT 0x50
#define REQUEST_READ_KEYS 0x51
struct solution {
int HS_DIV;
int N1;
double f0;
double RFREQ;
};
#endif /* _SI570AVRUSB_H */