/* * Hamlib CI-V backend - description of IC-9100 (HF/VHF/UHF All-Mode Transceiver) * Copyright (c) 2000-2011 by Stephane Fillod * * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA * */ #include #include "icom.h" #include "icom_defs.h" #include "idx_builtin.h" #include "bandplan.h" #include "tones.h" #define IC9100_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_CWR|\ RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_PKTUSB|RIG_MODE_PKTLSB) #define IC9100_OTHER_TX_MODES ((IC9100_MODES) & ~RIG_MODE_AM) #define IC9100_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MAIN|RIG_VFO_SUB|RIG_VFO_MEM|RIG_VFO_MAIN_A|RIG_VFO_MAIN_B|RIG_VFO_SUB_A|RIG_VFO_SUB_B) #define IC9100_SCAN_OPS (RIG_SCAN_VFO|RIG_SCAN_MEM|RIG_SCAN_SLCT|RIG_SCAN_PRIO) #define IC9100_VFO_OPS (RIG_OP_FROM_VFO| \ RIG_OP_TO_VFO| \ RIG_OP_CPY| \ RIG_OP_MCL| \ RIG_OP_XCHG| \ RIG_OP_TUNE) #define IC9100_FUNC_ALL (RIG_FUNC_NB| \ RIG_FUNC_NR| \ RIG_FUNC_ANF| \ RIG_FUNC_TONE| \ RIG_FUNC_TSQL| \ RIG_FUNC_COMP| \ RIG_FUNC_VOX| \ RIG_FUNC_FBKIN| \ RIG_FUNC_AFC| \ RIG_FUNC_SATMODE| \ RIG_FUNC_DUAL_WATCH| \ RIG_FUNC_VSC| \ RIG_FUNC_MN| \ RIG_FUNC_LOCK| \ RIG_FUNC_SCOPE) #define IC9100_LEVEL_ALL (RIG_LEVEL_AF| \ RIG_LEVEL_RF| \ RIG_LEVEL_SQL| \ RIG_LEVEL_NR| \ RIG_LEVEL_CWPITCH| \ RIG_LEVEL_RFPOWER| \ RIG_LEVEL_MICGAIN| \ RIG_LEVEL_KEYSPD| \ RIG_LEVEL_COMP| \ RIG_LEVEL_VOXGAIN| \ RIG_LEVEL_VOXDELAY| \ RIG_LEVEL_ANTIVOX| \ RIG_LEVEL_APF| \ RIG_LEVEL_AGC| \ RIG_LEVEL_PBT_IN| \ RIG_LEVEL_PBT_OUT| \ RIG_LEVEL_NOTCHF_RAW| \ RIG_LEVEL_ATT| \ RIG_LEVEL_PREAMP| \ RIG_LEVEL_MONITOR_GAIN| \ RIG_LEVEL_AGC_TIME) #define IC9100_PARM_ALL (RIG_PARM_ANN|RIG_PARM_BACKLIGHT) #define IC9100_STR_CAL UNKNOWN_IC_STR_CAL /* FIXME */ #define IC9100_HF_ANTS (RIG_ANT_1|RIG_ANT_2) struct cmdparams ic9100_extcmds[] = { { {.s = RIG_LEVEL_VOXDELAY}, CMD_PARAM_TYPE_LEVEL, C_CTL_MEM, S_MEM_PARM, SC_MOD_RW, 2, {0x01, 0x27}, CMD_DAT_INT, 1 }, { {.s = RIG_PARM_KEYERTYPE}, CMD_PARAM_TYPE_PARM, C_CTL_MEM, S_MEM_PARM, SC_MOD_RW, 2, {0x01, 0x02}, CMD_DAT_INT, 1 }, { {.s = RIG_PARM_NONE} } }; static const struct icom_priv_caps ic9100_priv_caps = { 0x7c, /* default address */ 0, /* 731 mode */ 1, /* no XCHG to avoid display flicker */ ic910_ts_sc_list, /* FIXME */ .antack_len = 2, .ant_count = 2, .extcmds = ic9100_extcmds, }; const struct rig_caps ic9100_caps = { RIG_MODEL(RIG_MODEL_IC9100), .model_name = "IC-9100", .mfg_name = "Icom", .version = BACKEND_VER ".5", .copyright = "LGPL", .status = RIG_STATUS_STABLE, .rig_type = RIG_TYPE_TRANSCEIVER, .ptt_type = RIG_PTT_RIG, .dcd_type = RIG_DCD_RIG, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 300, .serial_rate_max = 19200, .serial_data_bits = 8, .serial_stop_bits = 1, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_NONE, .write_delay = 0, .post_write_delay = 0, .timeout = 1000, .retry = 3, .has_get_func = IC9100_FUNC_ALL, .has_set_func = IC9100_FUNC_ALL | RIG_FUNC_RESUME, .has_get_level = IC9100_LEVEL_ALL | RIG_LEVEL_RAWSTR | RIG_LEVEL_SWR, .has_set_level = IC9100_LEVEL_ALL, .has_get_parm = IC9100_PARM_ALL, .has_set_parm = IC9100_PARM_ALL, .level_gran = { #include "level_gran_icom.h" [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } }, [LVL_VOXDELAY] = { .min = { .i = 0 }, .max = { .i = 20 }, .step = { .i = 1 } }, }, .parm_gran = { [PARM_BACKLIGHT] = {.min = {.f = 0.0f}, .max = {.f = 1.0f}, .step = {.f = 1.0f / 255.0f}}, [PARM_BANDSELECT] = {.step = {.s = "BANDUNUSED,BAND160M,BAND80M,BAND40M,BAND30M,BAND20M,BAND17M,BAND15M,BAND12M,BAND10M,BAND6M,BANDGEN"}}, [PARM_ANN] = {.min = {.i = 0}, .max = {.i = 2}, .step = {.i = 1}}, [PARM_KEYERTYPE] = {.step = {.s = "STRAIGHT, BUG, PADDLE"}}, }, .ctcss_list = common_ctcss_list, .dcs_list = common_dcs_list, .preamp = {20, RIG_DBLST_END, }, .attenuator = {20, RIG_DBLST_END, }, .max_rit = kHz(9.999), .max_xit = kHz(9.999), .max_ifshift = Hz(0), .targetable_vfo = 0, .vfo_ops = IC9100_VFO_OPS, .scan_ops = IC9100_SCAN_OPS, .transceive = RIG_TRN_RIG, .bank_qty = 0, .chan_desc_sz = 9, /* TODO */ .chan_list = { /* TBC */ { 1, 396, RIG_MTYPE_MEM }, { 397, 400, RIG_MTYPE_CALL }, { 401, 424, RIG_MTYPE_EDGE }, RIG_CHAN_END, }, .rx_range_list1 = { /* Europe */ {kHz(30), MHz(60), IC9100_MODES, -1, -1, IC9100_VFO_ALL, IC9100_HF_ANTS}, {kHz(136), MHz(174), IC9100_MODES, -1, -1, IC9100_VFO_ALL, RIG_ANT_3}, {MHz(420), MHz(480), IC9100_MODES, -1, -1, IC9100_VFO_ALL, RIG_ANT_4}, {MHz(1240), MHz(1320), IC9100_MODES, -1, -1, IC9100_VFO_ALL, RIG_ANT_5}, RIG_FRNG_END, }, .tx_range_list1 = { FRQ_RNG_HF(1, IC9100_OTHER_TX_MODES, W(2), W(100), IC9100_VFO_ALL, IC9100_HF_ANTS), FRQ_RNG_HF(1, RIG_MODE_AM, W(2), W(25), IC9100_VFO_ALL, IC9100_HF_ANTS), /* only HF */ FRQ_RNG_6m(1, IC9100_OTHER_TX_MODES, W(2), W(100), IC9100_VFO_ALL, IC9100_HF_ANTS), FRQ_RNG_2m(1, IC9100_OTHER_TX_MODES, W(2), W(100), IC9100_VFO_ALL, RIG_ANT_3), FRQ_RNG_70cm(1, IC9100_OTHER_TX_MODES, W(2), W(75), IC9100_VFO_ALL, RIG_ANT_4), /* option */ FRQ_RNG_23cm_REGION1(IC9100_OTHER_TX_MODES, W(1), W(10), IC9100_VFO_ALL, RIG_ANT_5), RIG_FRNG_END, }, .rx_range_list2 = { /* USA */ {kHz(30), MHz(60), IC9100_MODES, -1, -1, IC9100_VFO_ALL, IC9100_HF_ANTS}, {kHz(136), MHz(174), IC9100_MODES, -1, -1, IC9100_VFO_ALL, RIG_ANT_3}, {MHz(420), MHz(480), IC9100_MODES, -1, -1, IC9100_VFO_ALL, RIG_ANT_4}, {MHz(1240), MHz(1320), IC9100_MODES, -1, -1, IC9100_VFO_ALL, RIG_ANT_5}, RIG_FRNG_END, }, .tx_range_list2 = { FRQ_RNG_HF(2, IC9100_OTHER_TX_MODES, W(2), W(100), IC9100_VFO_ALL, IC9100_HF_ANTS), FRQ_RNG_HF(2, RIG_MODE_AM, W(2), W(25), IC9100_VFO_ALL, IC9100_HF_ANTS), /* only HF */ /* USA only, TBC: end of range and modes */ {MHz(5.255), MHz(5.405), IC9100_OTHER_TX_MODES, W(2), W(100), IC9100_VFO_ALL, IC9100_HF_ANTS}, /* USA only */ {MHz(5.255), MHz(5.405), RIG_MODE_AM, W(2), W(100), IC9100_VFO_ALL, IC9100_HF_ANTS}, /* USA only */ FRQ_RNG_6m(2, IC9100_OTHER_TX_MODES, W(2), W(100), IC9100_VFO_ALL, IC9100_HF_ANTS), FRQ_RNG_2m(2, IC9100_OTHER_TX_MODES, W(2), W(100), IC9100_VFO_ALL, RIG_ANT_3), FRQ_RNG_70cm(2, IC9100_OTHER_TX_MODES, W(2), W(75), IC9100_VFO_ALL, RIG_ANT_4), /* option */ FRQ_RNG_23cm_REGION2(IC9100_OTHER_TX_MODES, W(1), W(10), IC9100_VFO_ALL, RIG_ANT_5), RIG_FRNG_END, }, .tuning_steps = { {RIG_MODE_SSB | RIG_MODE_CW, 1}, {RIG_MODE_SSB | RIG_MODE_CW, 10}, {RIG_MODE_SSB | RIG_MODE_CW, 50}, {RIG_MODE_SSB | RIG_MODE_CW, 100}, {RIG_MODE_FM, kHz(0.1)}, {RIG_MODE_FM, kHz(5)}, {RIG_MODE_FM, kHz(6.25)}, {RIG_MODE_FM, kHz(10)}, {RIG_MODE_FM, kHz(12.5)}, {RIG_MODE_FM, kHz(20)}, {RIG_MODE_FM, kHz(25)}, {RIG_MODE_FM, kHz(100)}, RIG_TS_END, }, /* mode/filter list, remember: order matters! */ .filters = { {RIG_MODE_CW | RIG_MODE_SSB | RIG_MODE_RTTY, kHz(2.4)}, /* builtin */ {RIG_MODE_CW | RIG_MODE_RTTY, Hz(500)}, {RIG_MODE_FM, kHz(15)}, /* builtin */ {RIG_MODE_FM | RIG_MODE_AM, kHz(6)}, /* builtin */ RIG_FLT_END, }, .str_cal = IC9100_STR_CAL, .priv = (void *)& ic9100_priv_caps, .rig_init = icom_init, .rig_cleanup = icom_cleanup, .rig_open = icom_rig_open, .rig_close = icom_rig_close, .cfgparams = icom_cfg_params, .set_conf = icom_set_conf, .get_conf = icom_get_conf, .get_freq = icom_get_freq, .set_freq = icom_set_freq, .get_mode = icom_get_mode_with_data, .set_mode = icom_set_mode_with_data, .set_vfo = icom_set_vfo, // .get_vfo = icom_get_vfo, .set_ant = icom_set_ant, .get_ant = icom_get_ant, .get_ts = icom_get_ts, .set_ts = icom_set_ts, .get_func = icom_get_func, .set_func = icom_set_func, .get_level = icom_get_level, .set_level = icom_set_level, .set_ptt = icom_set_ptt, .get_ptt = icom_get_ptt, .set_rptr_shift = icom_set_rptr_shift, .get_rptr_shift = icom_get_rptr_shift, .set_rptr_offs = icom_set_rptr_offs, .get_rptr_offs = icom_get_rptr_offs, .set_ctcss_tone = icom_set_ctcss_tone, .get_ctcss_tone = icom_get_ctcss_tone, .set_ctcss_sql = icom_set_ctcss_sql, .get_ctcss_sql = icom_get_ctcss_sql, .set_dcs_sql = icom_set_dcs_code, .get_dcs_sql = icom_get_dcs_code, .set_parm = icom_set_parm, .get_parm = icom_get_parm, .set_mem = icom_set_mem, .vfo_op = icom_vfo_op, .scan = icom_scan, .get_dcd = icom_get_dcd, .decode_event = icom_decode_event, .set_split_vfo = icom_set_split_vfo, .get_split_vfo = icom_get_split_vfo, .set_split_freq = icom_set_split_freq, .get_split_freq = icom_get_split_freq, .set_split_mode = icom_set_split_mode, .get_split_mode = icom_get_split_mode, .hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS };