/* * Hamlib AOR backend - AR8600 description * Copyright (c) 2000-2010 by Stephane Fillod * * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA * */ #include #include #include #include "aor.h" #define AR8600_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_WFM) #define AR8600_FUNC (RIG_FUNC_TSQL|RIG_FUNC_ABM|RIG_FUNC_AFC) #define AR8600_LEVEL (RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR) #define AR8600_PARM (RIG_PARM_APO|RIG_PARM_BACKLIGHT|RIG_PARM_BEEP) #define AR8600_VFO_OPS (RIG_OP_MCL|RIG_OP_UP|RIG_OP_DOWN|RIG_OP_LEFT|RIG_OP_RIGHT) #define AR8600_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_PROG|RIG_SCAN_SLCT) #define AR8600_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM) /* Measurement by Mark, WAØTOP, * using a HP8640B signal generator on an AR8600 Mark 2 (sn. 551454). * The mode was AM. The ATT was off. */ #define AR8600_STR_CAL { 12, \ { \ { 0, -54 }, /* 1st point is extrapolated */ \ { 13, -27 }, /* S-pixels: none */ \ { 29, -17 }, \ { 41, - 7 }, \ { 49, 3 }, /* S-pixels: 21 */ \ { 54, 13 }, \ { 59, 23 }, \ { 62, 33 }, /* S-pixels: 30 */ \ { 64, 43 }, \ { 65, 53 }, \ { 68, 63 }, \ { 69, 73 } /* S-pixels: 36 */ \ } } #define AR8600_MEM_CAP { \ .freq = 1, \ .mode = 1, \ .width = 1, \ .bank_num = 1, \ .tuning_step = 1, \ .channel_desc = 1, \ .flags = 1, \ .levels = RIG_LEVEL_ATT, \ .funcs = RIG_FUNC_ABM, \ } static const struct aor_priv_caps ar8600_priv_caps = { .format_mode = format8k_mode, .parse_aor_mode = parse8k_aor_mode, .bank_base1 = 'A', .bank_base2 = 'a', }; /* * ar8600 rig capabilities. * Notice that some rigs share the same functions. * Also this struct is READONLY! * * part of info from http://www.aoruk.com/8600.htm */ const struct rig_caps ar8600_caps = { RIG_MODEL(RIG_MODEL_AR8600), .model_name = "AR8600", .mfg_name = "AOR", .version = BACKEND_VER ".0", .copyright = "LGPL", .status = RIG_STATUS_STABLE, .rig_type = RIG_TYPE_SCANNER, .ptt_type = RIG_PTT_NONE, .dcd_type = RIG_DCD_RIG, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 4800, .serial_rate_max = 19200, .serial_data_bits = 8, .serial_stop_bits = 2, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_XONXOFF, .write_delay = 0, .post_write_delay = 0, .timeout = 200, .retry = 3, .has_get_func = RIG_FUNC_NONE, .has_set_func = AR8600_FUNC, .has_get_level = AR8600_LEVEL, .has_set_level = RIG_LEVEL_SET(AR8600_LEVEL), .has_get_parm = RIG_PARM_NONE, .has_set_parm = RIG_PARM_NONE, /* FIXME: parms */ .level_gran = {}, /* FIXME: granularity */ .parm_gran = {}, .ctcss_list = NULL, /* FIXME: CTCSS list */ .dcs_list = NULL, .preamp = { RIG_DBLST_END, }, .attenuator = { 20, RIG_DBLST_END, }, /* TBC */ .max_rit = Hz(0), .max_xit = Hz(0), .max_ifshift = Hz(0), .targetable_vfo = 0, .transceive = RIG_TRN_RIG, .bank_qty = 20, /* A through J, and a through j */ .chan_desc_sz = 12, .vfo_ops = AR8600_VFO_OPS, .scan_ops = AR8600_SCAN_OPS, .str_cal = AR8600_STR_CAL, .chan_list = { { 0, 999, RIG_MTYPE_MEM, AR8600_MEM_CAP }, /* flat space */ RIG_CHAN_END, }, .rx_range_list1 = { {kHz(100), MHz(2040), AR8600_MODES, -1, -1, AR8600_VFO_ALL}, RIG_FRNG_END, }, /* rx range */ .tx_range_list1 = { RIG_FRNG_END, }, .rx_range_list2 = { {kHz(100), MHz(2040), AR8600_MODES, -1, -1, AR8600_VFO_ALL}, RIG_FRNG_END, }, /* rx range */ .tx_range_list2 = { RIG_FRNG_END, }, /* no tx range, this is a scanner! */ .tuning_steps = { {AR8600_MODES, 50}, {AR8600_MODES, 100}, {AR8600_MODES, kHz(1)}, {AR8600_MODES, kHz(5)}, {AR8600_MODES, kHz(9)}, {AR8600_MODES, kHz(10)}, {AR8600_MODES, 12500}, {AR8600_MODES, kHz(20)}, {AR8600_MODES, kHz(25)}, {AR8600_MODES, kHz(100)}, {AR8600_MODES, MHz(1)}, #if 0 {AR8600_MODES, 0}, /* any tuning step */ #endif RIG_TS_END, }, /* mode/filter list, .remember = order matters! */ .filters = { /* mode/filter list, .remember = order matters! */ {RIG_MODE_AM, kHz(9)}, {RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_AM, kHz(3)}, {RIG_MODE_FM | RIG_MODE_AM, kHz(12)}, {RIG_MODE_FM, kHz(9)}, {RIG_MODE_WFM, kHz(230)}, /* 150kHz at -3dB, 380kHz at -20dB */ RIG_FLT_END, }, .priv = (void *)& ar8600_priv_caps, .rig_init = NULL, .rig_cleanup = NULL, .rig_open = NULL, .rig_close = aor_close, .set_freq = aor_set_freq, .get_freq = aor_get_freq, .set_vfo = aor_set_vfo, .get_vfo = aor_get_vfo, .set_mode = aor_set_mode, .get_mode = aor_get_mode, .set_level = aor_set_level, .get_level = aor_get_level, .get_dcd = aor_get_dcd, .set_ts = aor_set_ts, .set_powerstat = aor_set_powerstat, .vfo_op = aor_vfo_op, .scan = aor_scan, .get_info = aor_get_info, .set_mem = aor_set_mem, .get_mem = aor_get_mem, .set_bank = aor_set_bank, .set_channel = aor_set_channel, .get_channel = aor_get_channel, .get_chan_all_cb = aor_get_chan_all_cb, .hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS }; /* * Function definitions below */