All,
attached is a git patch for adding the Yaesu FT-DX1200 radio to the yaesu
backend as model 134. I am humbly asking for this to be included in
hamlib.
I've tested this using a 1200 radio, using both rigctl and cqrlog. The
ft-dx1200 cat commands are a mix of ft-950 and ft-2000 radio commands, so
neither of those models will work correctly with the 1200. It was tested
and build against the master branch from github on 4/3/2015, on an Ubuntu
14.04 server.
Let me know if you have any questions.
thanks
Dave
kk6df at arrl.net
From cc0351fddc245b6223ae6c21dc6e29c5422fc822 Mon Sep 17 00:00:00 2001
From: David Fannin <dfannin@sushisoft.com>
Date: Sat, 4 Apr 2015 09:23:49 -0700
Subject: [PATCH 1/2] adding yaesu ft-dx1200 model to yaesu backend
This rig is largely similar to the TS-590S but for some reason Kenwood
have changed most the EX command ids. Even though hamlib makes little
use of the EX command, it probably will need to for future
functionality implemenattion. Hence the new rig id.
I wrote first support for new version of FUNcube Dongle. Differences
against original FCD are changed USB PID and wider frequency range.
73 Lada, OK1ZIA
Signed-off-by: Nate Bargmann <n0nb@n0nb.us>
From Martin, CT1IQI:
"Several programs under Linux rely on Hamlib for control. I wanted to
try WSJT-X (digital modes like JT65) and found that my new IC-7100 was
not yet supported, also after having compiled the current git version of
Hamlib and having compiled WSJT-X against that.
So I added a IC-7100 by taking the ic-7200 and 7420 rig files as
example, be it without going (yet) through all of the very many commands
the ic-7100 supports.
This produced the situation where there was communication, e.g. setting
and reading frequencies, but the PTT control did not work. I debugged
that to actually the lack of a PTT mode in Hamlib that uses serial and
CAT at the same time; currently PTT per 'serial' seems equivalent to
toggling certain RS232 pins but not to any serial command level. So I
added a RIG_PTT_SERIAL_CAT mode for PTT control. Now the wsjt-x program
works nicely with the ic-7100 and controls both frequency and PTT via
the single USB cable."
Signed-off-by: Nate Bargmann <n0nb@n0nb.us>
On the Peaberry forum, we have a thread with some hamlib patches for the
Peaberry SDR (a softrock-like transceiver). Both version 1 and version 2
have been implemented and tested.
There are two patches: the first one, made by me (ON8VQ) adds support
for the two radio's, and the second one, made by R2AEE, fixes the tuning
(using PICUSB commands instead of AVRUSB).
The patches are available here:
http://ae9rb.com/forum/viewtopic.php?f=4&t=166
Signed-off-by: Nate Bargmann <n0nb@n0nb.us>
Implemented hash table to temporarily store and sort the rig models by ID
to print the --list by model numbers. Hash is implemented using
uthash.h, see http://uthash.sourceforge.net/
Suppressed rig backend register output by setting rig_debug_level to 0
for list output.
Removed riglist definition of RPC backend.
From Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com>
vx-1700 notes:
==============
* the only possible way to switch from VFO_A to VFO_MEM is a
switching to configured memory channel.
* vfo_op(UP/DOWN) in memory mode switch channel UP/DOWN
correspondingly
* set_mem() in VFO mode do not change memory channel, but only
remember passed value. Thus we may set non-configured memory
channel number for future use in vfo_op(OP_FROM_VFO).
* get_mem() in VFO mode returns last used memory channel value.
It may return non-configured memory channel number passed to
set_mem() previously.
WARNING: VX-1700 CAT Manual have bugs, see comments in code.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3052 7ae35d74-ebe9-4afe-98af-79ac388436b8
Added FUNcube interface to Hamlib. This is a basic FUNcube interface:
at the moment only frequency set/readout is supported. From Stefano
Speretta <s.speretta@isispace.nl>.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3026 7ae35d74-ebe9-4afe-98af-79ac388436b8
Nate Bargmann