Mike Black W9MDB
a83eb3bf42
astyle files for 4.5 release
2022-07-27 17:16:17 -05:00
Mike Black W9MDB
4677fb16d4
Change FTDX5000 to RIG_PTT_RIG_MICDATA and add logic to newcat.
2022-07-19 23:25:56 -05:00
Mike Black W9MDB
e5ba9c401a
Force FTDX5000 to 100ms CAT TIME OUT TIMER
...
https://github.com/Hamlib/Hamlib/issues/1080
2022-07-09 07:40:59 -05:00
Mike Black W9MDB
5e6c1eaef8
Rename TRACE to HAMLIB_TRACE to avoid conflict with MSVC
2022-07-04 07:26:30 -05:00
Mike Black W9MDB
7708e979d9
Add some debug for 60m exception
2022-07-03 08:07:23 -05:00
Mike Black W9MDB
fc0e80a0d1
Add 60M exception for FTDX10 to not try and set frequency or mode
2022-07-03 07:58:47 -05:00
Mike Black W9MDB
479c43afa1
Update cache for yaesu rigs when bypassing rig_* functions
...
Update cache for FT991
Add polling for freq and mode in rig_open to prime those values
https://github.com/Hamlib/Hamlib/issues/1056
https://github.com/Hamlib/Hamlib/issues/1050
2022-06-07 11:50:25 -05:00
Mike Black W9MDB
0acb549153
Remove FT-991 from bandstack detection on band change -- does not behave well
...
https://github.com/Hamlib/Hamlib/issues/1046
2022-06-01 12:12:46 -05:00
Mike Black W9MDB
66b69f60a9
Remove redundant BS command in newcat.c
...
https://github.com/Hamlib/Hamlib/issues/1046
2022-06-01 10:36:33 -05:00
Mike Black W9MDB
b1a4bb06ce
Astyle files
2022-05-21 13:23:51 -05:00
Mike Black W9MDB
51cbf4af7a
For the FT-991 do not call get_narrow when mode is C4FM, PKTFM, or PKTFMN
2022-05-13 22:29:13 -05:00
Mike Black W9MDB
6f9d057162
astyle files getting ready for release
2022-05-13 16:50:13 -05:00
Mike Black W9MDB
c63a71601a
Fix newcat_get_mode for C4FM and PKTFMN
...
https://github.com/Hamlib/Hamlib/issues/1027
2022-05-13 15:19:04 -05:00
Mike Black W9MDB
066978ed15
Fix missing semicolon in newcat.c
2022-05-13 11:07:39 -05:00
Mike Black W9MDB
019faf3b6a
Add BU/BD commands to newcat.c validated with FA to get frequency of new band
...
https://github.com/Hamlib/Hamlib/issues/1026
2022-05-11 10:27:29 -05:00
Mike Black W9MDB
8865bf6c66
Add rig_flush in newcat.c during set_powerstat
2022-05-09 07:25:39 -05:00
Mike Black W9MDB
ab499d31eb
Double up the PS0; command in newcat.c too
2022-05-08 06:44:29 -05:00
Mike Black W9MDB
e661642a7d
Update Kenwood PS1 command to send PS1; twice instead of '\n' then PS1;
2022-05-08 06:36:50 -05:00
Mike Black W9MDB
24c7a0042a
Fix newcat.c error
2022-05-04 16:23:42 -05:00
Mike Black W9MDB
a079655290
Don't ask for VS command for some Yaeus rigs -- unnecessary warning occurs
2022-05-04 15:58:45 -05:00
Mike Black W9MDB
79180089a6
Add default VD meter calibration for 200W yaesu rigs e.g. FTDX-101MP
2022-05-01 07:26:44 -05:00
Mike Black W9MDB
f35e2d8c34
Fix newcat.c
2022-04-30 15:36:04 -05:00
Mike Black W9MDB
157eead021
In newcat.c only execute VS command if available
2022-04-30 15:33:44 -05:00
Mike Black W9MDB
5cce47e233
Change TEMP_METER to float
2022-04-30 13:44:09 -05:00
Mike Black W9MDB
829b632984
Make RIG_LEVEL_TEMP a bit more generic in newcat.c
2022-04-30 10:23:49 -05:00
Mike Black W9MDB
a975d734ba
One more time to try and get LEVEL_TEMP working in newcat.c
2022-04-28 14:41:57 -05:00
Mike Black W9MDB
e05d040460
Try again to fix LEVEL_TEMP for newcat.c
2022-04-28 12:06:05 -05:00
Mike Black W9MDB
3529c789a8
Fix LEVEL_TEMP value in newcat.c
2022-04-28 11:30:32 -05:00
Mike Black W9MDB
c8faa7a915
Change TEMP_METER to centigrade scale
2022-04-28 10:08:17 -05:00
Mike Black W9MDB
6ad3440341
Fix TEMP_METER level in newcat.c
2022-04-28 09:54:20 -05:00
PianetaRadio
b98f8bef25
Yaesu newcat, add RIG_FUNC_CSQL function
2022-04-08 09:43:26 +02:00
Mike Black W9MDB
bd1ffcfb54
Add CWR CWN to newcat PTT off delay
2022-03-31 23:18:00 -05:00
PianetaRadio
2f8d6e0f19
newcat_set_rx_bandwidth
...
Typo correction in the list for Yaesu FT-991
2022-03-19 17:30:13 +01:00
Mike Black W9MDB
21680572ab
Attempt to fix power on for Yaesu rigs. ID was being sent before byte wakeup so disabled the ID query.
...
https://github.com/Hamlib/Hamlib/issues/979
2022-03-07 11:25:31 -06:00
Mike Black W9MDB
d04f4b6b3b
Add validation handling for SH and RF in newcat.c
...
Fix FTDX10 SH command formatting
https://github.com/Hamlib/Hamlib/issues/973
2022-02-21 08:26:49 -06:00
Michael Black
9e762a3b10
Merge pull request #970 from jleh/ft991-meter-cal
...
Yaesu meter calibrations
2022-02-20 09:09:59 -06:00
Juuso Lehtinen
18dd9aa169
Add better defaults for newcat meter cals
2022-02-20 16:24:32 +02:00
Mike Black W9MDB
09ea2693c2
Balance RETURNFUNC
2022-02-19 16:39:50 -06:00
Mike Black W9MDB
523a22359a
Balance RETURNFUNC
2022-02-19 16:32:09 -06:00
Mike Black W9MDB
d86e2b980a
Make newcat.c FUNC_TUNER return EREJECT when AC command returns ?;
...
https://github.com/Hamlib/Hamlib/issues/963
2022-02-13 22:43:47 -06:00
Mike Black W9MDB
f2a41a6452
Fix FTDX10 SH command -- seems to be unique amongst Yaeus rigs
2022-02-07 16:32:04 -06:00
Mike Black W9MDB
8c34ce1a2d
astyle source code
2022-02-05 15:27:43 -06:00
Mike Black W9MDB
9ae7f7535d
Adjust band_t values to match the Yaesu indexes
...
https://github.com/Hamlib/Hamlib/issues/919
2022-02-04 22:13:22 -06:00
Mike Black W9MDB
68e121d82c
Change all to remove HAVE_CONFIG dependency and include <hamlib/config.h> by default
...
This is necessary to keep alignment between the client view of rig->state and the shared libarary view
Including PTHREAD functions in rig->state necessitated this as HAVE_PTHREAD only defined during hamlib compilation.
Clients including hamlib/rig.h did not pick up all the HAVE* config variable that control what gets included
https://github.com/Hamlib/Hamlib/issues/947
2022-02-04 07:41:36 -06:00
Mike Black W9MDB
3b1b643df3
Update RETURNFUNC to RETURNRFUNC2 in newcat_valid_command
2022-02-02 08:34:46 -06:00
Juuso Lehtinen
2b580d1c01
Fix set level METER for Yaesu rigs
...
Fix bug causing set level METER not to work with Yaesu rigs.
Fix set meter syntax for FTDX10
Tested with FT991A.
2022-02-01 23:01:55 +00:00
Mike Black W9MDB
da1400cd0d
Add errror if newcat band2rig is invalid
...
https://github.com/Hamlib/Hamlib/issues/919
2022-02-01 11:38:27 -06:00
Mike Black W9MDB
41eedc9479
Change band_t to hamlib_band_t to avoid collision with FLDigi's band_t
2022-02-01 09:12:36 -06:00
Juuso Lehtinen
236caa0d72
Add get & set RIG_LEVEL_NB for Yaesu rigs.
...
Tested with FT-991A
Same values applies to FTDX10D, FTDX101MP, FT991A, FTDX101D, FT891
2022-01-31 22:44:30 +00:00
Mike Black W9MDB
7b4b7ee630
Add a depth count to debug statements to help understand calling sequences
...
First call into rig functions is level 1
Top level like rigctl, rigctld is level 0
Non-depth calls are internal debug statements -- which can be modified to also show levels but that's a whole lot of statements not really necessary
Normal calls from other clients will be level 1
2022-01-30 23:37:01 -06:00