mdblack98
bf1a05084d
astyle files
2020-05-03 17:24:42 -05:00
mdblack98
d75272ddac
Fix caching math and clean up cachetest.c
...
https://github.com/Hamlib/Hamlib/issues/228
2020-05-02 23:10:55 -05:00
mdblack98
b244fe234c
Fix caching math...helps when you get the units right...nanoseconds...not microseconds
...
https://github.com/Hamlib/Hamlib/issues/228
2020-05-02 17:32:37 -05:00
mdblack98
baa3787bc5
Add ELAPSED_INVALIDATE for caching use
...
Change rig_get_vfo to use ELAPSED_INVALIDATE
Change elapsed_ms code to make a little more sense
https://github.com/Hamlib/Hamlib/issues/231
2020-05-02 11:19:44 -05:00
mdblack98
54fd75ffe8
Reduce verbosity on rig_strvfo
2020-05-02 07:57:16 -05:00
mdblack98
d5d6c55439
Fix JTDSK compilation warnings
...
https://github.com/Hamlib/Hamlib/issues/233
2020-05-01 14:33:35 -05:00
mdblack98
9e710156e3
Add ability for rigctld client to turn vfo mode on/off with (,)
...
https://github.com/Hamlib/Hamlib/issues/232
Add caching of some limited rig information
Can be adjusted or turned off with rig_cache_set_timeout_ms or in rigctl with \set_cache_timeout
https://github.com/Hamlib/Hamlib/issues/228
2020-05-01 12:03:54 -05:00
mdblack98
eb7829bd06
Add caching for the Yaesu IF command
...
It should speed up the WSJT-X/JTDX sequence of v,f,m,t by a fair bit removing two unnecessary IF commands that should get cached
2020-04-26 15:44:38 -05:00
Michael Black
f1f0d7f129
Fix some of the documentation
2020-04-09 17:56:19 -05:00
Michael Black
b04d49eca5
reduce some debub verbosity
2020-04-03 15:22:07 -05:00
Michael Black
9ad4f2638a
Remove some verbosity from rig_strscan
2020-03-31 16:10:43 -05:00
Michael Black
b83ecd9a5c
Reduce verbosity for rig_strvfop
2020-03-31 15:40:54 -05:00
Michael Black
8fd5e16363
astyle files
2020-03-26 11:11:46 -05:00
Michael Black
9e89c4455a
Add VFO & ANT definitions to rigs that were missing them
2020-03-25 23:07:42 -05:00
Michael Black
48a584cca4
Fix vfo_str[] to terminate correctly
2020-03-25 16:33:33 -05:00
Michael Black
ab77eea8b6
Fix cppcheck warnings in misc.c
2020-03-24 09:59:18 -05:00
Michael Black
8eb09c2a38
More cppcheck fixes
2020-03-23 07:52:01 -05:00
Michael Black
ed4b77726a
Add VFO None for available VFOS
2020-03-15 09:52:47 -05:00
Michael Black
ff8ddf018c
astyle all C files
2020-02-23 11:26:09 -06:00
Michael Black
f4c1143959
Add SCREENSAVER parm...implemented for 9700 for now
2020-02-23 09:48:21 -06:00
Michael Black
d634f84ed0
Remove verbose debug
2020-02-17 08:44:50 -06:00
Michael Black
bece609aca
Remove noisy debug from misc.c -- showed up rigctld -l for some odd reason
2020-01-24 12:17:16 -06:00
Michael Black
a1ec13fc14
Add C4FM mode for Yaesu FT-991
2020-01-15 08:15:29 -06:00
Michael Black
5e44f6637e
Fix mingw compile error on rig_strrmodes
2019-12-12 09:47:24 -06:00
Michael Black
b3c6b9d707
Add rig_strrmodes function and fix flrig to print mode list correctly
2019-12-12 09:13:30 -06:00
Michael Black
8f205c2237
Merge branch 'master' of https://github.com/Hamlib/Hamlib
2019-12-10 07:23:24 -06:00
Malcolm Herring
5f6e0641ad
Prepare for D-STAR implementation
...
Add 3 new rigs: ID-31, ID-51 & ID-4100
Update other D-STAR rigs: IC-R30, IC-R8600 & IC-7100
2019-12-09 05:33:20 +00:00
Michael Black
8f5ac2d68c
Fix cppcheck warnings in misc.c
2019-12-08 22:29:48 -06:00
Michael Black
12494c92d5
Add MainA, MainB, SubA, and SubB vfo choices for icom rigs with SATMODE
...
Clean up debug statements in icom.c
2019-12-02 07:50:05 -06:00
Michael Black
6bf3b00c4f
astyle all files
2019-11-30 10:19:08 -06:00
Michael Black
dc3ae60e1c
silence some debug in misc.c
2019-11-19 11:32:39 -06:00
Michael Black
b23734fb5b
Fix rig.h for merge
2019-06-12 16:13:56 -05:00
Michael Black
7e9c566944
Add first cut at amplifier control
2019-06-12 15:52:35 -05:00
Mikael Nousiainen
45a8c5c575
More fixes to many Icom HF rig backends: tuner function, VFO tune op, rig-specific AGC levels, basic set of filters where missing, get/set split, get/set powerstat, make get/set RIT/XIT commands shared functions, add new level for Noise Blanker level, fix RIG_MODE_PKTAM and add missing PKT modes for many rigs, add dual-watch function. Add RIT/XIT functions for TS-480 and TS-890.
2019-06-01 09:51:17 +03:00
Mikael Nousiainen
3dbbe02b78
Add new levels: RFPOWER_METER, COMP_METER, VD_METER and ID_METER, supported at least by most of recent Icom rigs. Add level NOTCHF_RAW for manual notch frequency without specified unit for Icom rigs. Add level MONITOR_GAIN. Add functions DUAL_WATCH and DIVERSITY, supported now by K3/K3S. Fix VOXDELAY level commands for many Icom rigs. Add MONITOR_GAIN level for Icom rigs. Fix and add many K3 commands and add specific rig models for K3S, KX2 and KX3 -- they are very similar to K3, but have slight differences. Extend dump_caps output for rigctl: add complete details of ext levels and frequency ranges. Tests have been performed on IC-7000, IC-756ProIII, IC-7300, IC-7600 and K3.
2019-05-30 09:37:49 +03:00
Michael Black
2fa14476f6
Reduce verbosity of rig_strvfo
2019-02-05 09:44:19 -06:00
Michael Black
8f93173462
Reduce verbosity of rig_strrmode and read_string
2019-02-05 09:31:54 -06:00
Michael Black
8b695bcc03
Add BC2 and NB2 functions for newer kenwoods
...
Change RIG_SETTING_MAX for 64-bit compatibility
2019-01-01 12:33:22 -06:00
Michael Black
772b1ba2c1
Fix rig_idx2settings for 64-bit sprintf_list functions
2018-12-31 15:39:49 -06:00
Malcolm Herring
2ccf99da04
icr30 updates
2018-12-26 08:25:38 +00:00
Malcolm Herring
1747595f10
ICR6 new functions
2018-12-24 11:00:12 +00:00
Michael Black
ce3f6806d0
Fix RIG_MODE structure in src/msic.c
2018-12-23 17:37:27 -05:00
Malcolm Herring
31cc85bf57
Add IC-R30
2018-12-21 07:07:41 +00:00
Mikael Nousiainen
3cdbad1064
TM-D710: Rewrite the whole backend, since most of it was not working anyway. TM-D710 protocol is significantly different from TM-D700 or the TH handheld ones. Most features work, but the control protocol is quite limited: for example, it is not possible to change the selected frequency band of a VFO. Additionally, selecting MEM VFO uses the previously selected band (VFOA/VFOB), since there are no separate MEM VFO definitions for A/B bands. Added FMN mode to string constants, so that it can be used with the set_mode command.
2018-03-15 09:33:01 +02:00
Nate Bargmann
ab3e6bb5a5
Formatted src/ to final coding guidelines
2017-10-04 21:32:08 -05:00
Nate Bargmann
f76b354588
Reformatted src directory
2017-08-09 06:14:31 -05:00
Michael Black W9MDB\n
d5b3c049af
Fixed SCAN_STOP for all rigs and implmented it plus SCOPE for ic7300
2016-06-02 23:08:22 -05:00
Bill Somerville
aebe52a45e
Add a new command line option '--no-restore-ai' ('-n') to rigctl
...
As Hamlib now restores the rig auto information state (AI) on exit
there is now a need to disable that functionality so that rigctl can
be used to set/reset AI mode on the rig explicitly.
A new public API function 'rig_no_restore_ai()' is also added that
allows any client to disable this auto AI restore functionality if
required. Most clients should do nothing as restoring AI state is a
good thing.
2015-12-04 00:22:01 +00:00
Nate Bargmann
36f5f4cf6a
Revert to previous handling of getaddrinfo()
...
Use the system gettaddrinfo function when possible as before. Tested on
GNU, Cygwin, MinGW on Linux, and MinGW on Windows. Under MinGW the
replacement getaddrinfo is used. Perhaps this is an area for
investigation to be certain MinGW really doesn't supply getaddrinfo.
This reverts some of the patches from Remi Chateauneu in commit
60019c9
. This fixes build issues encountered building the Windows
binary daily snapshots.
Enabled static library build by default at configure time.
Fixed pthread library linking for the ars backend on MinGW.
2013-09-15 19:47:49 -05:00
Remi Chateauneu
60019c9444
Monolitic libraries.
2013-09-08 14:56:28 +01:00