9d30205174
Fix linking error for w32-build.sh script
2021-01-31 12:20:44 -06:00
d8492c6602
Increase debugmsgsave size to avoid compiler warning about not big enough
2021-01-30 11:03:08 -06:00
8e70763619
Add debug msg to rig_error
2021-01-29 09:35:46 -06:00
7838539a3b
Add __FILENAME__ macro
2021-01-28 14:25:26 -06:00
5fec08b262
Add disable_yaesu_bandselect option
2021-01-20 11:34:30 -06:00
60279707e2
Fix VFOB caching
2021-01-18 08:28:20 -06:00
7615f85012
Fix hamlib_port structure alignment
...
Should fix the shared libary problem with WSJTX getting incorrect vfo_list
https://github.com/Hamlib/Hamlib/issues/500
2021-01-10 07:46:07 -06:00
19e819948f
Add RIG_TARGETABLE_ANT and fix Yaesu rigs -- Yaesu are only ones needing this right now
...
https://github.com/Hamlib/Hamlib/pull/495
2021-01-08 07:16:45 -06:00
54ab3b951d
Add RIG_CAPS_STATUS_CPTR
...
WSJT-X HamlibTransceiver.cpp now has no dependencies on structure offsets
https://github.com/Hamlib/Hamlib/issues/484
2021-01-03 09:16:20 -06:00
cf44a1a4e5
Change all rig_level_e enums to 64BIT
...
Some compilers couldnt' figure out the correct size
https://github.com/Hamlib/Hamlib/issues/486
2021-01-03 08:19:16 -06:00
90bdf5248c
Add rig_list_foreach_model
...
https://github.com/Hamlib/Hamlib/issues/484
2021-01-02 23:37:54 -06:00
9726e07db6
Change rig_get_function_ptr, rig_get_caps_intg, and rig_get_caps_cptr to use rig_model_t instead of RIG*
...
https://github.com/Hamlib/Hamlib/issues/484
2021-01-02 09:22:02 -06:00
a59bdad6f5
https://github.com/Hamlib/Hamlib/issues/484
2021-01-01 15:13:17 -06:00
aafaafd473
Added rig_get_caps_int and rig_get_caps_cptr functions to replace using caps-> values
...
https://github.com/Hamlib/Hamlib/issues/484
2021-01-01 10:59:36 -06:00
671f2070eb
Rename RIG_FUNCTION enums to shorten them up a bit
...
https://github.com/Hamlib/Hamlib/issues/484
2020-12-31 23:31:27 -06:00
f7ff96fec8
Adding rig_get_function to replace use of rig->caps->set_vfo and such
...
https://github.com/Hamlib/Hamlib/issues/484
2020-12-31 23:05:54 -06:00
82958c957c
Add RIG_MODE_SPEC for PowerSDR and perhaps others to come
2020-12-27 14:53:39 -06:00
2a0deb3415
Add RIG_LEVEL_RFPOWER_METER_WATTS
...
Old level of 0-1 just doesn't work well with the varying power levels in rigs now
2020-12-16 17:47:49 -06:00
457211a7e3
Add get_status command for rotator status flags. Add missing rotator caps in dumpcaps output.
2020-12-03 21:40:34 +02:00
bb315270bf
Merge branch 'master' into rotator-speed-control-and-status
2020-12-02 21:46:23 +02:00
c70d841b83
Add NOCHANGE_PASSBAND to icom...cascading effect on adding vfo elsewhere...which is needed anyways
...
https://github.com/Hamlib/Hamlib/issues/448
2020-11-29 23:32:14 -06:00
8827f081dd
Add flushx option for MicroHam devices to allow flushing by read instead of tcflush.
...
The special name of uh-rig only works on Linux and has other purposes apparently for ptt use
https://github.com/Hamlib/Hamlib/issues/446
2020-11-25 08:40:24 -06:00
a48f149955
Implement funcs, levels and parms + the ext variants for rotators. Add option to not change rotator speed when using the move command. Add rotator status flags. Work in progress.
2020-11-24 21:51:10 +02:00
6ecaed955f
Add RIG_METER_TEMP for FTDX101D and other newcat.c rigs
...
Update documentation on TONE and TSQL to make it clear
2020-11-11 08:21:38 -06:00
056e0b2359
Chance TSQL in newcat.c to allow more than 2 states
...
FTDX101D has state=2 for encode-only
2020-11-11 07:06:51 -06:00
81d02e22f1
Remove RIG_PASSBAND_ROOF as it was not necessary to use it
2020-11-10 22:17:15 +02:00
526fb21852
Add RX filter choices for FTDX 5000 and FTDX 3000. Go through the rest of the filter definitions and try to unify and fix any bugs. Add roofing filter support for FT-950 and FT-2000.
2020-11-06 10:35:21 +02:00
335a75518c
Add TARGETABLE_COMMON to rig.h
2020-11-01 17:00:44 -06:00
5721db70be
Added two more targetable flags for MEM and BANK to avoid VFO swapping
...
https://github.com/Hamlib/Hamlib/issues/430
https://github.com/Hamlib/Hamlib/issues/414
2020-11-01 07:48:52 -06:00
74356b3a99
Add RIG_TARGETABLE_PTT and RIG_TARGETABLE_RITXIT
...
For most rigs these are non-vfo specific commands so we can avoid doing VFO switching
Add flags to all Yaesu, Icom, and Kenwood in rig_open
Some rigs do have VFO specific but it's already in the backend
More rigs can use these flags..TBD...
https://github.com/Hamlib/Hamlib/issues/430
2020-10-31 17:19:08 -05:00
07447c881d
remove some cppcheck statements not needed anymore
2020-10-29 12:54:35 -05:00
4e748df12b
Add -x/--uplink switch for GPredict. Will avoid reading freq from the uplink VFO 1=Sub, 2=Main
...
This will likely deprecate the twiddle option
https://github.com/Hamlib/Hamlib/issues/404
2020-10-23 11:34:42 -05:00
8a769c7011
Add VFO_CURR to set_cache_freq and get_cache_freq
...
https://github.com/Hamlib/Hamlib/issues/300
2020-10-19 22:22:59 -05:00
0443afc794
Add wait_morse command with generit wait_morse_ptt function
...
This should work for any send_morse with full breakin
https://github.com/Hamlib/Hamlib/issues/422
2020-10-18 12:34:36 -05:00
a815179c68
https://github.com/Hamlib/Hamlib/issues/300
2020-10-18 12:06:27 -05:00
cd220db7c7
More changes for future 4.1 caching
...
https://github.com/Hamlib/Hamlib/issues/280
2020-10-17 23:42:57 -05:00
7a45f018ec
Add caching info for VFO_C
...
https://github.com/Hamlib/Hamlib/issues/280
2020-10-17 23:04:53 -05:00
8127391623
Notation on caching future change
...
https://github.com/Hamlib/Hamlib/issues/280
2020-10-17 22:47:57 -05:00
5add4b343d
Add rig_stop_morse to API and stop_morse command for rigctl
...
No rigs implemented yet
https://github.com/Hamlib/Hamlib/issues/240
2020-10-16 08:41:57 -05:00
4faad82da7
Change get_ptt RTS/DTR to keep serial port open
...
New option --set-conf=ptt_share=1 to revert to old behavior where serial port is opened/closed every get_ptt
https://github.com/Hamlib/Hamlib/issues/383
2020-10-12 23:27:13 -05:00
45edda6a16
Add RIG_TARGETABLE_LEVEL to rig.h
2020-10-12 09:41:12 -05:00
d6cad85cf2
kenwood.c don't ask for power min/max when PTT is on
2020-10-07 12:40:59 -05:00
50b394098e
Fix RIG_PASSBAND
...
Add RIG_PASSBAND_ROOF macro
2020-10-07 07:32:05 -05:00
86417420b4
Change PASSBAND_NORMAL back to zero to keep backwards compatiblity
...
This will change in 5.0
2020-10-06 23:10:45 -05:00
b7f73a3b46
Change RIG_PASSBAND_NORMAL to -2 to avoid colliding with Yaesu 0 bandwidth
...
https://github.com/Hamlib/Hamlib/issues/396
2020-10-05 14:53:40 -05:00
9b26a4e957
Add PKTFMN mode for FTDX101D
...
Finish mods to newcat get_rx_bandwidth
https://github.com/Hamlib/Hamlib/issues/391
2020-10-05 12:53:56 -05:00
23971f8e75
Fix issues with Icom extcmds definitions, some ext_tokens missing. Refactor custom level implementations to use extcmds definitions. Print out extfuncs in caps dump.
2020-09-16 18:10:35 +03:00
2020f29185
Remove redundant RIG_LEVEL_BRIGHT
2020-09-10 10:07:11 -05:00
24fb47cbe0
Added IC-705
...
Added RIG_LEVEL_BRIGHT -- IC705 has this level
Fixed range printout
https://github.com/Hamlib/Hamlib/issues/364
2020-09-06 12:28:35 -05:00
31115b6a16
deprecate itu_region
2020-07-24 14:23:38 -05:00
d7b332c3f7
Fix spelling errors
...
Fixed using the following command:
codespell --write-changes --summary --skip=*.m4 --ignore-words-list="develope,get's,quitt,setts,som,ue,vektor"
codespell --write-changes --summary --skip=aclocal.m4,lib --ignore-words-list="develope,get's,quitt,setts,som,ue,vektor"
Codespell home page: https://github.com/codespell-project/codespell
2020-07-24 09:02:48 +02:00
281febec62
New power on option rather than power on/off
...
Also fixes incorrect token name usage in token definition
2020-07-04 23:23:39 +01:00
3f40029720
Add missing config parameters for rig power on/off and screen-saver
...
Defaults set to by compatible with prior released versions to avoid
regressive behaviour.
2020-07-04 19:42:37 +01:00
fa08887471
Change hamlib_cache_t enums to HAMLIB namespace
2020-07-02 10:23:41 -05:00
d42d837162
Normalize cache namespaces to hamlib_ and HAMLIB_
2020-07-01 22:33:32 -05:00
2c64ba9bba
First round of rigs switched over to new rig_flush function
...
When done this will allow all rigs to use network connections and stil flush properly
https://github.com/Hamlib/Hamlib/issues/307
2020-06-23 08:27:45 -05:00
835caf34f9
Add rig_flush function
...
https://github.com/Hamlib/Hamlib/issues/307
2020-06-22 23:54:11 -05:00
815db24852
Fix MSVC compile by removing unistd.h and defining our own rig_useconds_t
...
https://github.com/Hamlib/Hamlib/issues/301
2020-06-13 17:40:47 -05:00
1317bb8034
Fix vfo_fixup link error
...
Make vfo_fixup a HAMLIB function so it can be used elsewhere
https://github.com/Hamlib/Hamlib/issues/299
2020-06-12 08:28:05 -05:00
92cbaf620e
Precursor to implementing more caching
...
No effect yet
https://github.com/Hamlib/Hamlib/issues/280
2020-06-04 10:58:22 -05:00
ae24d50901
add numbers to rig_errcode_e documentation
2020-06-02 22:29:25 -05:00
87a83ffbb1
rigctld now works with rigctl in vfo mode
...
https://github.com/Hamlib/Hamlib/issues/259
set_vfo_opt can now dynamically change vfo mode on rigctld
So this example now works...does some non-vfo stuff then switches to vfo mode
rigctl -m 2 F 14074000 V VFOB F 14076000 V VFOA f V VFOB f set_vfo_opt 1 f VFOA
rigctl commands v,V and S have been changed to not require VFO arguments
New API function rig_set_vfo_opt -- only implemented for Net rigctl as it doesn't apply to any other rigs
2020-05-27 12:21:41 -05:00
1add89bd71
Add rules for setting VFO_RX and VFO_TX for different rig types
...
https://github.com/Hamlib/Hamlib/issues/261
2020-05-24 23:42:35 -05:00
0cd1bb198b
Revert rig_debug to use 16384 buffer to avoid compilation warnings
2020-05-21 10:27:51 -05:00
a77a57ff38
Disallow requesting a vfo that the rig doesn't have.
...
This could be changed to automatically selecting a valid VFO so
VFOA=Main or Main=VFOA for example but not sure if we want to do this.
This is already being done for the IC-9700 for example since satmode
only has Main/Sub where non-satmode has MainA/MainB/SubA/SubB
So the question is do we emulate VFOA/B and Main/Sub for all rigs?
2020-05-21 15:51:41 +02:00
f8321a36f4
Fix cppcheck warnings and fill out unused RIG_LEVEL items
2020-05-05 23:33:40 -05:00
3794bc5a0a
Fix cppcheck warnings
2020-05-05 09:38:36 -05:00
baa3787bc5
Add ELAPSED_INVALIDATE for caching use
...
Change rig_get_vfo to use ELAPSED_INVALIDATE
Change elapsed_ms code to make a little more sense
https://github.com/Hamlib/Hamlib/issues/231
2020-05-02 11:19:44 -05:00
9e710156e3
Add ability for rigctld client to turn vfo mode on/off with (,)
...
https://github.com/Hamlib/Hamlib/issues/232
Add caching of some limited rig information
Can be adjusted or turned off with rig_cache_set_timeout_ms or in rigctl with \set_cache_timeout
https://github.com/Hamlib/Hamlib/issues/228
2020-05-01 12:03:54 -05:00
5eb5b6f3d8
https://github.com/Hamlib/Hamlib/issues/227
...
Added read_only flag everywhere
2020-04-26 14:37:03 -05:00
bc33e3ea43
Fix gcc 10 warning
2020-04-10 08:36:01 -05:00
f1f0d7f129
Fix some of the documentation
2020-04-09 17:56:19 -05:00
9e89c4455a
Add VFO & ANT definitions to rigs that were missing them
2020-03-25 23:07:42 -05:00
9d8ddd4582
Replace RIG_LEVEL_VOX with RIG_LEVEL_VOXDELAY
2020-03-24 10:02:17 -05:00
bda5feb1bd
More cppcheck changes
2020-03-23 10:13:02 -05:00
c489f97624
More cppcheck changes
2020-03-20 07:51:32 -05:00
a60d1c315d
Rename struct rig so s_rig and struct rot to s_rot
...
This avoids name collision with swig bindings for Rig and Rot classes
This is a harmless change as these are use as RIG and ROT anyways
2020-03-13 23:55:44 -05:00
8e66304860
Move macro_name to end of rig_caps to maintain shared libarary compatibility
2020-03-08 08:39:11 -05:00
3a43815d71
Move macro_name later in structure for better compatibility
2020-03-06 09:44:29 -06:00
d0f114b178
Add macro_name to caps structures for rig, rot, and amp devices
2020-03-05 23:48:14 -06:00
d856248178
Add RIG_MODEL macro and change all rigs to support it
2020-03-05 08:44:18 -06:00
8b462a0242
Add set_twiddle and get_twiddle functions
...
Add -W switch to rigctld to set twiddle timeout..don't need switch for rigctl since it can set from there with \set_twiddle
2020-02-24 09:34:02 -06:00
f4c1143959
Add SCREENSAVER parm...implemented for 9700 for now
2020-02-23 09:48:21 -06:00
95986b9685
Add detection of VFO twiddling
...
In the case of gpredict there are times when one has to adjust the
VFO to dial in a frequency while gpredict is tracking.
We now detect this situation and have a 3-second delay every time
VFO twiddling is detected. set_freq and set_vfo calls will be
ignored during this delay.
May make this a settable value if needed.
2020-02-23 08:28:19 -06:00
b961ff0566
Fix rig.h description of new frequency ranges
2020-02-18 06:31:18 -06:00
b443794897
Add new 5-range frequency definitions
2020-02-17 06:45:10 -06:00
2161667428
Fix range_list in ft991
...
Add explanation of RIG_ANT_CURR for channel.ant entry. It's to be used when rigs have multiple antenna ports for dedicated band ranges and the rig does not have a set_ant command
2020-02-12 15:00:10 -06:00
49aa7d00a7
Fix get_ant RIG_ANT_CURR logic
2020-02-12 07:20:34 -06:00
e3cef196f7
add g/set_ext_func to API
2020-02-11 09:48:13 +00:00
fdef21f068
Merge pull request #193 from mdblack98/master
...
2020-02-05 Patches
2020-02-05 23:24:48 -06:00
c6e06bfb01
ICOM Voice Keyer implemented.
2020-02-06 01:00:34 +01:00
7e8938ae65
Changed y command to now use mandatory antenna argument
...
Put a looplimit on icom_get_ant_count trying to get autodetect to work
Changes to icom_get_ant_count to try and get this working
Added dummy antenna # args to rigs that don't care i.e. only have 1 antenna
2020-02-02 08:38:10 -06:00
d853c36fb3
Change get_ant to add another option for icom rigs (and others if needed)
2020-01-21 17:53:12 -06:00
04ba2f9806
Merge branch 'mdblack98-master'
2020-01-20 19:27:17 -06:00
09b5d87449
Fix lua bindings for 64-bit compilation
...
Tested on swig 4.0.1 and lua 5.3.5
2020-01-19 11:15:44 -06:00
85541cc257
Merge remote-tracking branch 'Hamlib/master'
2020-01-18 05:59:49 +00:00
f6b39c1161
update rigs for new functions
2020-01-18 05:59:22 +00:00
a1ec13fc14
Add C4FM mode for Yaesu FT-991
2020-01-15 08:15:29 -06:00
27edb089c7
Merge remote-tracking branch 'Hamlib/master'
2020-01-11 06:54:30 +00:00
b7e8f01701
Fix mingw32 DLL linkage of hl_sleep
2020-01-10 15:58:16 -06:00
a4295a224e
Merge remote-tracking branch 'mdblack/master'
2020-01-09 07:54:15 +00:00
5ae03f0eed
Possible fix for mingw Win32 dll linking of nanosleep
2020-01-08 22:50:37 -06:00
138787f44c
Hopefully fixed dll build and usleep linking
2020-01-08 14:34:14 -06:00
7ee3a702f5
Replace all usleep with hl_usleep
...
Several places where usleep max value could be overflowed
New hl_usleep can take values > 1000000
2020-01-07 23:18:56 -06:00
4d822d5983
Merge remote-tracking branch 'mdblack/master'
2020-01-06 19:54:54 +00:00
c4e0696ee1
add token list for ext operations
2020-01-06 19:54:09 +00:00
836e5f5c17
Move time.h include to sleep.c
2020-01-06 07:25:38 -06:00
c897ce9084
Merge remote-tracking branch 'mdblack/master'
...
merge mdblack master
2020-01-06 07:06:09 +00:00
70115f7efd
Replace sleep macros with hamlib custom functions
2020-01-05 15:37:33 -06:00
4975150611
Merge remote-tracking branch 'Hamlib/master'
...
merge latest upstream
2020-01-04 06:00:03 +00:00
fcde35815b
more extended operations
2020-01-04 05:59:44 +00:00
24eaeecfdf
Fix sleep macros and newcat.c set_powerstat
2019-12-24 15:01:08 -06:00
b07833c889
Pretty up sleep macros
2019-12-22 11:30:30 -06:00
ed339b1c2b
Add sleep and usleep macros so all sleeps use nanosleep
2019-12-22 11:17:22 -06:00
b3c6b9d707
Add rig_strrmodes function and fix flrig to print mode list correctly
2019-12-12 09:13:30 -06:00
5f6e0641ad
Prepare for D-STAR implementation
...
Add 3 new rigs: ID-31, ID-51 & ID-4100
Update other D-STAR rigs: IC-R30, IC-R8600 & IC-7100
2019-12-09 05:33:20 +00:00
72565fe621
Fix ic7300 VFOs and sprintflst to be more generic
2019-12-02 14:46:41 -06:00
2f4d62709e
Added a dummy snprintf to rig_debug to allow gcc to check format strings
...
This found tons of errors in rig_debug statements
So this patch cleans up all the files that were producing warnings or errors
This should fix a few segfaults when running with debug turned on
2019-11-30 10:04:31 -06:00
58763c96ae
Reorder RIG_VFO entries and add RIG_VFO_MAIN_A and RIG_VFO_MAIN_B in preparation for other changes
2019-11-28 09:57:49 -06:00
707d60b123
Fix another mistake...arrghhh
2019-10-15 09:47:45 -05:00
6ab855fcb6
Fix mistaken commit
2019-10-15 09:46:26 -05:00
f0a6fa7ff9
Merge
2019-10-13 23:01:15 -05:00
d931bd4e18
Move unnecessary global and file static variables to the stack
2019-08-29 00:39:39 +01:00
52c084195f
Add note for LUA UUL changes
2019-08-18 08:21:14 -05:00
73c1ecd165
Change freq & chan struct start/end to avoid colliding with LUA SWIG start/end
2019-08-17 23:20:48 -05:00
1b5f59577f
Add warning in rig.h for thread_local missing
2019-08-01 22:41:56 -05:00
6d28b6b1b1
Adding thread_local definition to rig.h
2019-07-31 15:48:35 -05:00
9bbbfa953e
Fix rig.h for merge
2019-06-12 16:23:15 -05:00
b23734fb5b
Fix rig.h for merge
2019-06-12 16:13:56 -05:00
7e9c566944
Add first cut at amplifier control
2019-06-12 15:52:35 -05:00
45a8c5c575
More fixes to many Icom HF rig backends: tuner function, VFO tune op, rig-specific AGC levels, basic set of filters where missing, get/set split, get/set powerstat, make get/set RIT/XIT commands shared functions, add new level for Noise Blanker level, fix RIG_MODE_PKTAM and add missing PKT modes for many rigs, add dual-watch function. Add RIT/XIT functions for TS-480 and TS-890.
2019-06-01 09:51:17 +03:00
3dbbe02b78
Add new levels: RFPOWER_METER, COMP_METER, VD_METER and ID_METER, supported at least by most of recent Icom rigs. Add level NOTCHF_RAW for manual notch frequency without specified unit for Icom rigs. Add level MONITOR_GAIN. Add functions DUAL_WATCH and DIVERSITY, supported now by K3/K3S. Fix VOXDELAY level commands for many Icom rigs. Add MONITOR_GAIN level for Icom rigs. Fix and add many K3 commands and add specific rig models for K3S, KX2 and KX3 -- they are very similar to K3, but have slight differences. Extend dump_caps output for rigctl: add complete details of ext levels and frequency ranges. Tests have been performed on IC-7000, IC-756ProIII, IC-7300, IC-7600 and K3.
2019-05-30 09:37:49 +03:00
e2f6c7d092
Add icom get_vfo introduced on IC-9700
...
Add DD mode for IC-9700
Numerous IC-9700 updates
2019-04-07 09:03:55 -05:00
296ef58598
Add export definition for netrigctl_get_mode for DLL building
2019-02-08 07:28:50 -06:00
8b695bcc03
Add BC2 and NB2 functions for newer kenwoods
...
Change RIG_SETTING_MAX for 64-bit compatibility
2019-01-01 12:33:22 -06:00
772b1ba2c1
Fix rig_idx2settings for 64-bit sprintf_list functions
2018-12-31 15:39:49 -06:00
df4ec51909
Simplify SWIG interface definition and hide 64-bit values from Lua binding
...
By including the stdint SWIG typemaps we can directly use types
derived from [u]int64_t etc.
Because Lua numbers are implemented using a double-precision floating
point type and also because SWIG when generating a Lua wrappings can
only define constants from #define and enum values that fit into an
'int' type we must hide any constants that require more than 32-bits
to represent themselves, as they cannot be represented in Lua. This
applies to rmode_t and the RIG_FUNC... defines at the time of
writing. By hiding them from the Lua binding they will get a 'nil'
value in Lua i.e. undefined so clients using the Lua binding will know
they are not there. This is a nasty hack but without major design
changes to the Hamlib API it is do this or drop the Lua binding.
2018-12-28 20:33:30 +00:00
2ccf99da04
icr30 updates
2018-12-26 08:25:38 +00:00
1747595f10
ICR6 new functions
2018-12-24 11:00:12 +00:00
4b69188f67
Fix some 64bit items and add RIG_FUNC_NB2 for TS-890S
2018-12-23 17:41:10 -05:00
7123bb4403
Change rmode_t to uint64_t and remove unneeded casts
2018-12-22 23:56:30 -05:00
005fb29cf7
Add TS-890S as derivative of TS-480 plus new modes
2018-12-22 12:03:41 -05:00
cd0a9aebb6
Merge hamlib head
2018-12-21 12:54:47 -05:00
422b266b9b
Change RIG_MODE and RIG_FUNC to 64-bit values
2018-12-21 12:39:20 -05:00
31cc85bf57
Add IC-R30
2018-12-21 07:07:41 +00:00
82e0ee8364
New model Icom IC-R8600
...
So here is the first release of the new IC-R8600 rig backend.
Implemented functions so far:
set/get freq
set/get mode
functions: NB TSQL ANF NR AIP MN LOCK VSC RESUME
level: PREAMP ATT AF RF SQL NR PBT_IN PBT_OUT CWPITCH AGC RAWSTR STRENGTH
extra levels (params): ANN BACKLIGHT KEYLIGHT
Mode list: AM CW USB LSB RTTY FM WFM CWR RTTYR SAM SAL SAH
Next up:
* correct filter settings
* new digital modes
* memory store/retrieve
* correct CTCSS, DTCS handling
* correct BEEP handling (broken)
73,
Ekki, DF4OR
2018-12-17 12:37:17 -06:00
d8f010cfa3
Add ability to have rigctld display transverter frequency
...
Use -C lo_freq=xxxxx to have rigctld add x to your vfo frequency
internally
2018-11-07 11:49:06 -05:00
9c7ce6eacb
Merge branch 'master' of github.com:Hamlib/Hamlib
2018-05-06 00:12:23 +02:00
04af1b0553
Add PKTAM PKTFM modes to ic7300
2018-05-01 08:12:05 -05:00
b19a9138a6
Set FILPATHLEN to 512 instead of 100 to support longer device file names -- especially ones generated by udev
2018-04-22 19:53:50 -05:00
6c369109e6
Add debug time stamps via -Z and --debug-time-stamps
2018-04-15 15:06:52 -05:00
bfa948ebc5
Add GPIO and GPION options for DCD.
...
Also bump abi version since the config params struct needed resizing.
2018-03-29 23:55:25 +02:00
80a4097aba
Add best guess transmit status to rig state structure
...
This flag can be used by back ends that need to take special action
while the rig is transmitting e.g. the FT-747GX and similar that do
not process CAT commands while transmitting.
The flag is also used as a default answer to rig_get_ptt if nothing
better is available.
Deal with inaccurate CAT query for Rx/Tx on the Yaesu FT-847
This rig doesn't set the Rx/Tx status flag when PTT is asserted via
the PTT pin on the rear PACKET socket so we need to override which we
can do if we known we have asserted PTT via rig_set_ptt().
Adjust style and fix set PTT defects
Fix a warning from a declaration of a deleted function definition
2017-08-09 21:54:50 -05:00
cedd914e68
Apply formatting to 'include/' directory.
...
Format public and private header files per new formatting guide.
2017-08-09 06:14:31 -05:00
da40941d7f
Merge branch 'master' of https://github.com/N0NB/hamlib
2016-08-31 09:22:13 -05:00
b5f53519bc
Remove define
2016-08-31 09:11:14 -05:00
15b3e73e7f
Exposed constants via function calls
2016-08-31 09:05:47 -05:00
bf2b5c80ba
Merge branch 'master' of http://video.vreeken.net/~pe1rxq/hamlib-code
2016-06-05 11:43:53 -05:00
d5b3c049af
Fixed SCAN_STOP for all rigs and implmented it plus SCOPE for ic7300
2016-06-02 23:08:22 -05:00
1bf736d650
Add support for GPIO PTT.
2016-05-28 16:00:03 +02:00
222ad74de7
Add RIG_PASSBAND_NOCHANGE as possible set_{split_,split_freq_,}mode argument
...
This change allows the set_mode functions to leave the rig passband
unchanged if required. For the few rigs that do not have explcit
passband width control either current state is read and rewritten or a
"normal" width is chosen e.g. select a normal width when there is a
choice like CW and CW-NARROW.
2016-04-19 21:27:52 +01:00
21c346453a
Implement combined split VFO frequency and mode setting.
...
CAT protocols that don't allow direct addressing of VFOs require that
the "other" VFO be queried or set via a select then get/set then
select back to original or swap then get/set then swap again. When
both frequncy and mode need to be set the sequences can be optimized
if a single funciton is avaiable.
This enhancement adds those single functions rig_set_split_freq_mode()
and rig_get_split_freq_mode() with a default impelementation that
calls the individual rig_{get,set}_split_{freq,mode}() functions. Back
ends can choose to implement an optimized version which is used
instead of the default if present.
Using these functions when an optimized implementation is available
allows the TX VFO's frequency and mode to be set in a single operation
with only one VFO exchange or selection either side of the
operation. Many CAT protocols are very efficient when getting or
setting both frequency and mode and some even combine the two in a
single command.
The letters 'K' and 'k' are used for the rigctl short command name for
these functions.
2016-03-23 17:09:26 +00:00
aebe52a45e
Add a new command line option '--no-restore-ai' ('-n') to rigctl
...
As Hamlib now restores the rig auto information state (AI) on exit
there is now a need to disable that functionality so that rigctl can
be used to set/reset AI mode on the rig explicitly.
A new public API function 'rig_no_restore_ai()' is also added that
allows any client to disable this auto AI restore functionality if
required. Most clients should do nothing as restoring AI state is a
good thing.
2015-12-04 00:22:01 +00:00
542585029d
Initial back end implementation for the Kenwood TS-990s
2015-04-14 10:04:59 +01:00
19f131b1b8
Remove redundant RIG_PTT_SERIAL_CAT enum from ptt_t
...
The Icom IC-7100 back end added this enum instead of using the extant
RIG_PTT_RIG enum. Also the rig_get_ptt() implementation didn't handle
it and errored out.
Note: RIG_PTT_SERIAL_CAT was added in commit
e9ee671149
2014-10-09 10:25:38 -05:00
0f600af80a
Add a tag name to hamlib_port_t.
...
I am making a Haskell binding to hamlib and this anonymous struct was
creating some issues for me. I am not a C-coder by day, but I think this
is harmless to add here.
Signed-off-by: Ricky Elrod <ricky@elrod.me>
2014-08-14 11:22:39 -04:00
e9ee671149
Add Icom IC-7100 support.
...
From Martin, CT1IQI:
"Several programs under Linux rely on Hamlib for control. I wanted to
try WSJT-X (digital modes like JT65) and found that my new IC-7100 was
not yet supported, also after having compiled the current git version of
Hamlib and having compiled WSJT-X against that.
So I added a IC-7100 by taking the ic-7200 and 7420 rig files as
example, be it without going (yet) through all of the very many commands
the ic-7100 supports.
This produced the situation where there was communication, e.g. setting
and reading frequencies, but the PTT control did not work. I debugged
that to actually the lack of a PTT mode in Hamlib that uses serial and
CAT at the same time; currently PTT per 'serial' seems equivalent to
toggling certain RS232 pins but not to any serial command level. So I
added a RIG_PTT_SERIAL_CAT mode for PTT control. Now the wsjt-x program
works nicely with the ic-7100 and controls both frequency and PTT via
the single USB cable."
Signed-off-by: Nate Bargmann <n0nb@n0nb.us>
2013-10-25 08:40:36 -05:00
36f5f4cf6a
Revert to previous handling of getaddrinfo()
...
Use the system gettaddrinfo function when possible as before. Tested on
GNU, Cygwin, MinGW on Linux, and MinGW on Windows. Under MinGW the
replacement getaddrinfo is used. Perhaps this is an area for
investigation to be certain MinGW really doesn't supply getaddrinfo.
This reverts some of the patches from Remi Chateauneu in commit
60019c9
2013-09-15 19:47:49 -05:00
60019c9444
Monolitic libraries.
2013-09-08 14:56:28 +01:00
8c2eee91cc
rig.h: Replace rig_func_e with CPP macros
...
The C standard dictates that an enum constant is a 32 bit signed
integer. Setting a constant's bit 31 created a negative value that on
amd64 had the upper 32 bits set as well when assigned to the
misc.c:func_str structure. This caused misc.c:rig_strfunc() to fail its
comparison for RIG_FUNC_XIT on amd64 (x86_64). To use bit 31 as an
unsigned long, preprocessor macros have been used instead as a 'const
unsigned long' which cannot be used to initialize the func_str.func
members. TNX KA6MAL, AC6SL. - N0NB
Other minor formatting edits.
2013-01-31 18:00:50 -06:00
f82184cbf5
Add RIT and XIT as rig_set/get_func() members
...
In response to a long standing request from Tor, N4OGW, and others, RIT
and XIT are added as members for the rig_set/get_func() members.
"RIT"/"XIT" have been added as tokens. The dummy rig backend and
testrig.c have been updated for these new functions.
Applications should test a backend with the rig_has_set/get_func() and
test for RIG_FUNC_RIT or RIG_FUNC_XIT. A non-zero result indicates
these functions are implemented by a given rig backend. It will take
some time for all backends to migrate to this new implementation. Once
implemented, RIT or XIT should be set to '0' to 'clear' the value
without deactivating the rig's RIT/XIT function. The dummy/dummy.c file
can be used as a simple guide for backend authors implementing this
behavior.
2013-01-15 12:47:47 -06:00
3466512dbd
Fix spelling errors
2012-08-21 19:54:50 -07:00
46033db165
CM108 GPIO PTT: do not break ABI
...
Move around the ptt_bitnum field in the union of hamlib_port_t.
Increase Hamlib frontend revision.
2012-01-11 23:28:01 +01:00
1a77ef9eb9
Initial support for CM108 GPIO contorl of PTT
...
Signed-off-by: Nate Bargmann <n0nb@n0nb.us>
2012-01-11 06:16:51 -06:00
da80137819
Add support for RIG_PORT_UDP_NETWORK
...
Also some copyright year update,
and default serial device on MacOSX
2012-01-06 09:28:24 +01:00
2fd02a9ade
Update LGPL header in include header files.
...
TNX to Lucian Laga, YO6PLB, for the notification.
2011-08-22 21:38:35 -05:00
421909bad2
Let set_ptt() select source, either TX mic or TX data
2011-07-20 00:09:50 +02:00
01e2396ead
- revert creation of RIG_MODE_WAM and RIG_MODE_SFM
...
- sr2200:
- fix filter width of WFM
- prevent symbol littering
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3044 7ae35d74-ebe9-4afe-98af-79ac388436b8
2011-02-08 22:21:11 +00:00
bd20ccd356
AOR SR2200 backend added by Stefano Speretta
...
New backend, SR2200, heavily derived from AR8200 backend. From Stefano
Speretta <s.speretta@isispace.nl>.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3025 7ae35d74-ebe9-4afe-98af-79ac388436b8
2011-01-28 00:32:55 +00:00
9de8e3f1d2
Add Mark/Space serial parity
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2996 7ae35d74-ebe9-4afe-98af-79ac388436b8
2010-10-26 19:31:09 +00:00
453995e7c0
fix segfault and allow mode listing in rigctl
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2865 7ae35d74-ebe9-4afe-98af-79ac388436b8
2010-04-05 10:01:09 +00:00
f411c3fae0
allow tones and func calls to be targetable
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2845 7ae35d74-ebe9-4afe-98af-79ac388436b8
2010-03-05 18:48:40 +00:00
b636a3f6ac
allow check of vendor name and product string when looking for USB device
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2727 7ae35d74-ebe9-4afe-98af-79ac388436b8
2009-09-14 07:32:36 +00:00
976540de77
set/get_split_{freq,mode} assisted by frontend
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2655 7ae35d74-ebe9-4afe-98af-79ac388436b8
2009-02-20 14:14:31 +00:00
bb6cf68ad2
implemented set/get_ext_param (voice, fine, xit, rit). enabled on ts450 and
...
ts850
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2620 7ae35d74-ebe9-4afe-98af-79ac388436b8
2009-02-06 14:15:12 +00:00
3419987f6b
better documentation of enum rig_errcode_e
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2596 7ae35d74-ebe9-4afe-98af-79ac388436b8
2009-01-25 16:23:06 +00:00
19da025135
removed NFM NFM
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2579 7ae35d74-ebe9-4afe-98af-79ac388436b8
2009-01-11 17:42:29 +00:00
86badd1aaf
Documentation updates.
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2571 7ae35d74-ebe9-4afe-98af-79ac388436b8
2009-01-09 23:03:37 +00:00
76b48e3d9f
Added RIG_MODE_NFM, RIG_MODE_NAM
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2547 7ae35d74-ebe9-4afe-98af-79ac388436b8
2009-01-03 14:08:00 +00:00
e9aa6fe546
- Extra comma on RIG_STATUS_BUGGY can cause a compiler error.
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2540 7ae35d74-ebe9-4afe-98af-79ac388436b8
2009-01-01 17:07:09 +00:00
9746bdd342
Added RIG_LEVEL_BKIN_DLYMS - CW Breakin delay in milliseconds to rig_level_e enum
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2530 7ae35d74-ebe9-4afe-98af-79ac388436b8
2008-12-26 23:57:15 +00:00
6e47295527
Added RIG_METER_VDD
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2522 7ae35d74-ebe9-4afe-98af-79ac388436b8
2008-12-24 20:12:11 +00:00
c62b141599
RIG_ANT_5
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2504 7ae35d74-ebe9-4afe-98af-79ac388436b8
2008-12-14 19:26:35 +00:00
8f350baa93
Added RIG_AGC_AUTO enum
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2478 7ae35d74-ebe9-4afe-98af-79ac388436b8
2008-11-26 16:20:20 +00:00
883193fe12
added RIG_METER_PO
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2452 7ae35d74-ebe9-4afe-98af-79ac388436b8
2008-11-01 20:35:16 +00:00
f541b221fe
new netrigctl/netrotctl protocol with return value
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2428 7ae35d74-ebe9-4afe-98af-79ac388436b8
2008-10-27 22:23:36 +00:00
cdab2cce53
Dropped RIG_STATUS_NEW from enum of possible backend states in rig.h.
...
Mapped all RIG_STATUS_NEW requests from existing applications to RIG_STATUS_UNTESTED for backward compatibility.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2418 7ae35d74-ebe9-4afe-98af-79ac388436b8
2008-10-25 11:36:02 +00:00
1f1a363dc6
new RIG_MTYPE_BAND
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2344 7ae35d74-ebe9-4afe-98af-79ac388436b8
2008-05-04 21:15:17 +00:00
6e4ed42cca
allow rig_lookup_mem_caps() to retrieve a union of all the mem_caps sets
...
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2336 7ae35d74-ebe9-4afe-98af-79ac388436b8
2008-05-01 12:32:43 +00:00
a0635dd7b2
* added RIG_MTYPE_PRIO
...
* added rig_lookup_mem_caps/rig_mem_count and rig_strmtype/rig_parse_mtype
* misc change to RIG_VFO* for Swig to make them available in the bindings
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2329 7ae35d74-ebe9-4afe-98af-79ac388436b8
2008-04-27 09:46:35 +00:00
Michael Black W9MDB