mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
11 139 Commity
53 Gałęzie
28 Tagi
31 MiB
Wykres commitów

30 Commity (master)

Autor SHA1 Wiadomość Data
Mike Black W9MDB 20caf608ac For the FT991 change write_delay=0 and post_write_delay=2 
https://github.com/Hamlib/Hamlib/issues/1163
 2022-12-03 10:34:26 -06:00
Mike Black W9MDB 827ae18f2e Reduce FT991 write_delay to 2ms and post_write_delay to 0ms 
This works with CAT TOT = 10ms at 38,400 baud
https://github.com/Hamlib/Hamlib/issues/1163
 2022-12-03 07:40:06 -06:00
Mike Black W9MDB a9de174335 Change FT991 write_delay to 5ms -- was seeing many serial errors with 0ms 
https://github.com/Hamlib/Hamlib/issues/1163
 2022-12-02 08:07:12 -06:00
Mike Black W9MDB eeac97c725 Fix FT-991 level_gran 
https://github.com/Hamlib/Hamlib/issues/1144
 2022-11-10 16:00:00 -06:00
PianetaRadio 4468b153e2
FT991 add RIG_FUNC_CSQL function 2022-04-08 09:48:32 +02:00
PianetaRadio 14b6941a01
Modes macro updated 
To meet update of ft991.c
 2022-03-19 17:18:32 +01:00
Juuso Lehtinen 18dd9aa169 Add better defaults for newcat meter cals 2022-02-20 16:24:32 +02:00
Juuso Lehtinen 2d51b635c2 Add ID, VD & Comp meter cals for FT991 
Power level should return 0 when power is 0
 2022-02-20 16:18:02 +02:00
Juuso Lehtinen 236caa0d72 Add get & set RIG_LEVEL_NB for Yaesu rigs. 
Tested with FT-991A

Same values applies to FTDX10D, FTDX101MP, FT991A, FTDX101D, FT891
 2022-01-31 22:44:30 +00:00
Mike Black W9MDB 991e314820 Add RIG_LEVEL_BAND_SELECT for Yaesur rigs 
https://github.com/Hamlib/Hamlib/issues/919
 2022-01-29 16:25:18 -06:00
Mikael Nousiainen f71712b23b Add contour, audio peak filter and keyer functions/levels for many Yaesu rigs 2021-11-20 21:28:26 +02:00
Mike Black W9MDB 1ca3d34010 Change Yaeus send_voice_mem to built-in function rather than FUNC implementaion 
https://github.com/Hamlib/Hamlib/issues/830
 2021-10-22 07:29:27 -05:00
Mike Black W9MDB c9d7a924c7 Add RIG_FUNC_SEND_VOICE_MEM with FT991 as the 1st implementation 
https://github.com/Hamlib/Hamlib/issues/830
 2021-10-21 17:36:54 -05:00
Mike Black W9MDB 5c29e099a9 Add RIG_FUNCTION_SEND_VOICE_MEM for FT991 
https://github.com/Hamlib/Hamlib/issues/830
 2021-10-18 23:55:42 -05:00
Wouter van Gulik 0ebf99742e Yeasu rigs: move native command to C file, move function declration to C 
file.
There is no point in having it in the header file if data that is used only in
the C file.
Export ft857_[sg]et_vfo via the ft857 header and use the header in
ft897.
 2021-09-04 21:37:28 +02:00
Michael Black W9MDB 2a0deb3415 Add RIG_LEVEL_RFPOWER_METER_WATTS 
Old level of 0-1 just doesn't work well with the varying power levels in rigs now
 2020-12-16 17:47:49 -06:00
Michael Black W9MDB 7911fd1d4b Add power level to ft991 and fix ft1200 table 
https://github.com/Hamlib/Hamlib/issues/462
 2020-12-11 16:38:02 -06:00
Mikael Nousiainen 0ad76ba38a Fix a number of issues in Yaesu commands, all changes based on manuals 2020-11-05 11:05:37 +02:00
Mikael Nousiainen 3a49428f58 Add MEM VFO for new Yaesu rigs. Use FTDX101 SWR cal table that was left unused. 2020-10-24 10:55:11 +03:00
Mikael Nousiainen ce19b843ba Add more missing levels to Yaesu rigs 2020-10-23 11:38:04 +03:00
Mikael Nousiainen 211de272df Add more meters for Yaesu newcat rigs 2020-10-23 11:24:09 +03:00
Mikael Nousiainen fea5ed875d Add separate definitions for FTDX101 to make fixes for filters and modes. Fix many newcat commands for FTDX101 and some other newcat Yaesu rigs. 2020-10-23 00:04:43 +03:00
Mike Goodey 8ba082c662 Changes for FT991 RIT/XIT 2020-08-28 18:16:17 +01:00
Michael Black W9MDB c70805902a Reduce FT991 post_write_delay based on testing 2020-06-28 23:34:11 -05:00
Michael Black W9MDB d0d2e368a8 Fix dcs/ctcss functions for FT-991 2020-05-20 22:26:58 -05:00
Michael Black W9MDB 429ab72a16 Fix ft991 mode/width settings 2020-05-09 15:52:49 -05:00
mdblack98 4dad9eda36 Add FM mode to ft991.c 
https://github.com/Hamlib/Hamlib/issues/239
 2020-05-05 17:30:36 -05:00
Michael Black a7b28a63d4 ft991 changes to work with gpredict 2020-04-19 23:18:59 -05:00
Michael Black 2161667428 Fix range_list in ft991 
Add explanation of RIG_ANT_CURR for channel.ant entry.  It's to be used when rigs have multiple antenna ports for dedicated band ranges and the rig does not have a set_ant command
 2020-02-12 15:00:10 -06:00
Michael Black 8d6e2fc781
Directory migration to new layout 2020-01-17 09:22:44 -06:00