mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
9 293 Commity
53 Gałęzie
28 Tagi
31 MiB
Wykres commitów

2256 Commity (Hamlib-4.5)

Autor SHA1 Wiadomość Data
Mike Black W9MDB 9c02b2ebc2 Fix Yaesu DT command and add 2 or 4 digit timezone option 
https://github.com/Hamlib/Hamlib/issues/1132
 2022-10-25 23:26:16 -05:00
Mike Black W9MDB e3ce4a35a4 Add RIG_SCAN_STOP to newcat_scan 2022-10-21 22:54:20 -05:00
Mike Black W9MDB d3d21983f0 Fix newcat_scan 2022-10-21 22:41:29 -05:00
Mike Black W9MDB bbeb87eb05 Add newcat_scan for Yaesu rigs 2022-10-21 22:27:58 -05:00
Mike Black W9MDB b674317791 Fix kenwood PS command length 2022-10-21 13:26:13 -05:00
Mike Black W9MDB e9325c9c7b Fix case on TS-990S 2022-10-16 08:15:33 -05:00
Mike Black W9MDB 411925a372 FT710 does have targetable mode 2022-10-14 15:44:24 -05:00
Mike Black W9MDB b46b930770 Update FT710 parameters based on testing 
FT8 mode defaults to 1 stop bit and no hardware flow control
 2022-10-14 15:33:26 -05:00
Mike Black W9MDB e6cd452c9d Fix detection if FT-710 
Update simyaesu.c
 2022-10-14 09:02:40 -05:00
Mike Black W9MDB 04bc5cc089 Add FT710 to newcat.c checks 2022-10-13 17:41:27 -05:00
Mike Black W9MDB 791a5e3f57 Update max baud rate for ft710.c 2022-10-12 23:12:48 -05:00
Mike Black W9MDB 436365f6a4 Add ft710.c 2022-10-12 22:57:51 -05:00
Mike Black W9MDB ec4aea81b2 Add FT-710 as a clone of FTDX10 2022-10-12 22:51:21 -05:00
Mike Black W9MDB dde5d752fc Update kenwood.h date 2022-10-12 22:39:04 -05:00
Mike Black W9MDB b3d0a5a350 Add if_len to flex6xxx.c 2022-10-12 22:38:21 -05:00
Mike Black W9MDB 8adfd5e351 Update some debug and fix length of PS command in kenwood.c 2022-10-10 22:15:06 -05:00
Mike Black W9MDB 6bd5ab89b6 Remove incorrect debug line in icom.c 2022-09-22 15:39:42 -05:00
Mike Black W9MDB 67b933ddb5 Update astyle for 4.5 release 2022-09-20 08:46:28 -05:00
Mike Black W9MDB 9b98ea11eb Make debug rx_vfo info match code better in kenwood.c 
https://github.com/Hamlib/Hamlib/issues/1116
 2022-09-17 10:24:13 -05:00
Mike Black W9MDB 7db23d549f Add another priv->has_ps check to kenwood.c 2022-09-13 22:15:22 -05:00
Mike Black W9MDB 8c4c906efe Add a few more rigs to have_ps=0 2022-09-13 16:22:03 -05:00
Mike Black W9MDB e7262e23c8 Make TS450S turn off has_ps 
https://github.com/Hamlib/Hamlib/issues/1114
 2022-09-13 11:45:58 -05:00
Mike Black W9MDB f58ca95c9c TS-450S/690S does not have PS cmd so we will disable have_ps when 1st call to PS times out for Kenwood rigs 
https://github.com/Hamlib/Hamlib/issues/1114
 2022-09-13 09:26:04 -05:00
Mike Black W9MDB 098d1d8dbb Fix uninitialized value in flrig.c found by valgrind 2022-09-10 13:00:34 -05:00
Mike Black W9MDB 224ccc7839 Fix filter set for IC375 and promote to stable 
https://github.com/Hamlib/Hamlib/issues/1113
 2022-09-09 14:01:43 -05:00
Mike Black W9MDB 9cb511af00 Add some debug for Icom use_cached variables 
https://github.com/Hamlib/Hamlib/issues/1108
 2022-09-05 12:21:45 -05:00
Mike Black W9MDB 4007581363 Add async capability to IC-706 series while we're debugging issue 1108 
https://github.com/Hamlib/Hamlib/issues/1108
 2022-09-05 09:54:17 -05:00
Mike Black W9MDB 5701e73e1e Fix valgrind warning 
https://github.com/Hamlib/Hamlib/issues/1108
 2022-08-31 08:57:00 -05:00
Mike Black W9MDB 7e51932a9e Remove some debug from icom.c 2022-08-29 10:11:40 -05:00
Mike Black W9MDB 1aed27c71a Remove #defines for rig_set_split and return to standard call 2022-08-27 07:36:14 -05:00
Michael Black efd166fb50
Merge pull request #1106 from mikaelnousiainen/fix-yaesu-power-off-handling 
Fix handling of EPOWER error code and reduce unnecessary commands in Yaesu newcat backend
 2022-08-23 12:11:51 -05:00
Mikael Nousiainen dc02c566f5 Fix handling of the new EPOWER error code: do not re-open rig and fix/extend allowed commands when rig is powered off. Fix Yaesu newcat backend to not try to call rig ID command during command validation. 2022-08-23 00:10:25 +03:00
Mike Black W9MDB ef06b358d7 Add verification of EX commands in newcat.c 2022-08-22 15:55:35 -05:00
Mike Black W9MDB 2275bf51f8 When Yaeus rigs are split and tx is on VFOA then turning split off will remain on VFOB tx/rx 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 12:20:01 -05:00
Mike Black W9MDB 95126fd350 Add EX echo as separte get_cmd call for CAT TOT TIMEOUT 
Could do this for other EX commands too
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 12:00:38 -05:00
Mike Black W9MDB f8f0678988 Take out EX echo request -- can't do that as EX command does not expect response 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 11:57:53 -05:00
Mike Black W9MDB 4664620b92 Add FTDX300DM to same exceptions as FTDX3000 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 11:51:34 -05:00
Mike Black W9MDB 3f99ec47db Have FTDX5000 and DX3000 echo CAT TOT TIMEOUT when set 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 11:47:13 -05:00
Mike Black W9MDB e86e05bce3 Change FTDX3000 CAT TOT TIMEOUT to 100ms 
Change Yaesu split detection to detect reverse split
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 11:40:52 -05:00
Mike Black W9MDB e8fa723bc8 Change FTDX3000 write_delay back to zero -- at value of 1 rigctl was showing all ? responses from rig at 38400 baud 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 10:29:22 -05:00
Mike Black W9MDB c34f719337 Astyle files 2022-08-20 22:56:04 -05:00
Mike Black W9MDB b4150fce19 FT747GX add TARGETABLE_FREQ and update rx_range_list and tx_range_list for new range_list implmentation 
https://github.com/Hamlib/Hamlib/issues/1101
 2022-08-19 15:39:21 -05:00
Mike Black W9MDB d0dcfbff84 FT747GX remove debug code -- duh... 2022-08-19 11:57:08 -05:00
Mike Black W9MDB abc2d5a846 FT747GX show cached freqs when get_freq is called 
https://github.com/Hamlib/Hamlib/issues/1101
 2022-08-19 09:33:10 -05:00
Mike Black W9MDB b97b8b0fe7 For FT747GX do not get info when PTT is on -- use cached info 2022-08-19 09:30:59 -05:00
Mike Black W9MDB 28b1a9bb95 Increase FT747GX cache timeout to 1500ms as get_freq is taking over 1000ms 2022-08-19 08:33:31 -05:00
Mike Black W9MDB 179ee66f0d Add 600ms wait when newcat.c see rig busy 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-19 08:21:29 -05:00
Mike Black W9MDB 6965927fb4 Add IC275 to icom rigs that can't do 0x25 2022-08-19 07:55:20 -05:00
Mike Black W9MDB ed5a26ac4e Try to get FT747GX to return freq while transmitting 
https://github.com/Hamlib/Hamlib/issues/1101
 2022-08-19 06:58:03 -05:00
Mike Black W9MDB deb5ea6d6f For FT747GX return cached freq when in TX 2022-08-18 17:33:41 -05:00