Fix numerous gcc v10 warnings

include/hamlib/amplifier.h

@@ -31,7 +31,7 @@
  */
 
 /**
- *  \file amp.h
+ *  \file amplifier.h
  *  \brief Hamlib amplifier data structures.
  *
  *  This file contains the data structures and declarations for the Hamlib

include/hamlib/amplist.h

@@ -81,10 +81,10 @@
  */
 
 /**
- *  \def AMP_MODEL_ELECRAFT1
+ *  \def AMP_MODEL_ELECRAFT
  *  \brief A macro that returns the model number of the EasyComm 1 backend.
  *
- *  The Elecraft 1 backend can be used with amplifiers that support the
+ *  The Elecraft #1 backend can be used with amplifiers that support the
  *  KPA1500 protocol.
  */
 #define AMP_ELECRAFT 2

include/hamlib/rotlist.h

@@ -205,8 +205,8 @@
  *  GS23 protocol.
  */
  /**
- *  \def ROT_MODEL_AMSAT_LVB
- *  \brief A macro that returns the model number of the AMSAT_LVB TRACKER backend.
+ *  \def ROT_MODEL_LVB
+ *  \brief A macro that returns the model number of the LVB TRACKER backend.
  *
  *  The AMSAT LVB TRACKER backend can be used with rotators that support the
  *  AMSAT LVB TRACKER GS232 based protocol.

rigs/tentec/omnivii.c

@@ -1433,7 +1433,7 @@ int tt588_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt)
 const char *tt588_get_info(RIG *rig)
 {
     static char cmdbuf[16], firmware[64];
-    int cmd_len, firmware_len, retval;
+    int cmd_len, firmware_len=sizeof(firmware), retval;
 
     cmd_len = sprintf(cmdbuf, "?V" EOM);
     memset(firmware, 0, sizeof(firmware));

rigs/tentec/rx331.c

@@ -909,7 +909,7 @@ int rx331_vfo_op(RIG *rig, vfo_t vfo, vfo_op_t op)
 const char *rx331_get_info(RIG *rig)
 {
     static char buf[BUFSZ]; /* FIXME: reentrancy */
-    int firmware_len, retval;
+    int firmware_len = sizeof(buf), retval;
 
     retval = rx331_transaction(rig, REPORT_FIRM, strlen(REPORT_FIRM),
                                buf, &firmware_len);

rigs/yaesu/newcat.c

@@ -6337,7 +6337,7 @@ int newcat_set_cmd(RIG *rig)
                correct - alternative is response is longer that the
                buffer */
             if (strncmp(verify_cmd, priv->ret_data, strlen(verify_cmd) - 1)
-                    || !strchr(&cat_term, priv->ret_data[strlen(priv->ret_data) - 1]))
+                    || (cat_term != priv->ret_data[strlen(priv->ret_data) - 1]))
             {
                 rig_debug(RIG_DEBUG_ERR, "%s: Unexpected verify command response '%s'\n",
                           __func__, priv->ret_data);

src/amp_reg.c

@@ -68,7 +68,7 @@ DEFINE_INITAMP_BACKEND(dummy);
 DEFINE_INITAMP_BACKEND(kpa1500);
 
 /**
- *  \def AMP_BACKEND_LIST
+ *  \def amp_backend_list
  *  \brief Static list of amplifier models.
  *
  *  This is a NULL terminated list of available amplifier backends. Each entry

src/cm108.c

@@ -77,7 +77,7 @@
  * \param port
  * \return file descriptor
  */
-int cm108_open(hamlib_port_t *p)
+int cm108_open(hamlib_port_t *port)
 {
     int fd;
 #ifdef HAVE_LINUX_HIDRAW_H
@@ -86,19 +86,19 @@ int cm108_open(hamlib_port_t *p)
 
     rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
 
-    if (!p->pathname[0])
+    if (!port->pathname[0])
     {
         return -RIG_EINVAL;
     }
 
-    fd = open(p->pathname, O_RDWR);
+    fd = open(port->pathname, O_RDWR);
 
     if (fd < 0)
     {
         rig_debug(RIG_DEBUG_ERR,
                   "%s: opening device \"%s\": %s\n",
                   __func__,
-                  p->pathname,
+                  port->pathname,
                   strerror(errno));
         return -RIG_EIO;
     }
@@ -138,7 +138,7 @@ int cm108_open(hamlib_port_t *p)
 
 #endif
 
-    p->fd = fd;
+    port->fd = fd;
     return fd;
 }
 
@@ -147,11 +147,11 @@ int cm108_open(hamlib_port_t *p)
  * \brief Close CM108 HID port
  * \param port
  */
-int cm108_close(hamlib_port_t *p)
+int cm108_close(hamlib_port_t *port)
 {
     rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
 
-    return close(p->fd);
+    return close(port->fd);
 }
 
 

src/debug.c

@@ -134,7 +134,7 @@ int HAMLIB_API rig_need_debug(enum rig_debug_level_e debug_level)
 }
 
 /**
- * \param debug_time_stamp
+ * \param flag
  * \brief Enbable/disable time stamp on debug output
  */
 void HAMLIB_API rig_set_debug_time_stamp(int flag)

src/rig.c

@@ -1084,17 +1084,17 @@ int HAMLIB_API rig_cleanup(RIG *rig)
 /**
  * \brief timeout (secs) to stop rigctld when VFO is manually changed
  * \param rig   The rig handle
- * \param timeout_secs    The timeout to set to
+ * \param seconds    The timeout to set to
  *
- * timeout (secs) to stop rigctld when VFO is manually changed
+ * timeout seconds to stop rigctld when VFO is manually changed
  * turns on/off the radio.
- * See \set_twiddle
+ * See \rig_set_twiddle
  *
  * \return RIG_OK if the operation has been sucessful, ortherwise
  * a negative value if an error occured (in which case, cause is
  * set appropriately).
  *
- * \sa rig_set_twiddle()
+ * \sa rig_get_twiddle()
  */
 int HAMLIB_API rig_set_twiddle(RIG *rig, int seconds)
 {

src/rot_reg.c

@@ -85,7 +85,7 @@ DEFINE_INITROT_BACKEND(meade);
 DEFINE_INITROT_BACKEND(ioptron);
 
 /**
- *  \def ROT_BACKEND_LIST
+ *  \def rot_backend_list
  *  \brief Static list of rotator models.
  *
  *  This is a NULL terminated list of available rotator backends. Each entry

src/sleep.c

@@ -32,7 +32,7 @@
 
 /**
  * \brief provide sleep and usleep replacements
- * \param same as man page for each
+ * \note parameters are same as man page for each
  *
  */
 #include <unistd.h>
@@ -99,7 +99,7 @@ int usleep(useconds_t usec)
     return 0;
 }
 #endif // HAVE_NANOSLEEP
-
+#pragma GCC diagnostic ignored "-Wall"
 #ifdef __cplusplus
 }
 #endif