Version 5.0.6 b; documentation updates
rodzic
100ec650d9
commit
71fcb50957
|
@ -1,6 +1,6 @@
|
|||
# Single Channel LoRaWAN Gateway
|
||||
|
||||
Version 5.0.2, November 18, 2017
|
||||
Version 5.0.6, February 11, 2017
|
||||
Author: M. Westenberg (mw12554@hotmail.com)
|
||||
Copyright: M. Westenberg (mw12554@hotmail.com)
|
||||
|
||||
|
@ -16,6 +16,12 @@ Maintained by Maarten Westenberg (mw12554@hotmail.com)
|
|||
|
||||
# Release Notes
|
||||
|
||||
New features in version 5.0.6 (Feb 11, 2018)
|
||||
- All timer functions that show lists on website etc are now based on now() en NTP,
|
||||
the realtime functions needed for LoRa messages are still based on micros() or millis()
|
||||
- Change some USB debug messages
|
||||
- Added to the documentation of the README.md
|
||||
|
||||
New Features in version 5.0.5 (Feb 2, 2018)
|
||||
- Change timer functions to now() and secons instead of millis() as the latter one overflows once
|
||||
every 50 days.
|
||||
|
|
29
README.md
29
README.md
|
@ -1,6 +1,6 @@
|
|||
# Single Channel LoRaWAN Gateway
|
||||
|
||||
Version 5.0.3, December 09, 2017
|
||||
Version 5.0.6, February 12, 2017
|
||||
Author: M. Westenberg (mw12554@hotmail.com)
|
||||
Copyright: M. Westenberg (mw12554@hotmail.com)
|
||||
|
||||
|
@ -44,6 +44,8 @@ The LoRa nodes tested againts this gateway are:
|
|||
- Arduino Pro-Mini (default Armega328 model, 8MHz 3.3V and 16MHz 3.3V)
|
||||
- ESP8266 based nodes with RFM95 transceivers.
|
||||
|
||||
The code has been tested on at least 8 separate gateway boards both based on the Hallard and the Comresult boards.
|
||||
I'm still working on the ESP32 pin-out and functions (expected soon).
|
||||
|
||||
# Getting Started
|
||||
|
||||
|
@ -101,6 +103,7 @@ When setting DUSB to 0 all output by Serial is disabled
|
|||
|
||||
\#define DUSB 1
|
||||
|
||||
|
||||
### Debug
|
||||
|
||||
The user can set the initial value of the DEBUG parameter.
|
||||
|
@ -109,6 +112,26 @@ Setting this parameter will also detemine some settings of the webserver.
|
|||
\#define DEBUG 1
|
||||
|
||||
|
||||
### Selecting you standard pin-out
|
||||
|
||||
We support two pin-out configurations out-of-the-box: HALLARD and COMPRESULT.
|
||||
If you use one of these two, just set the parameter to the right value.
|
||||
If your pin definitions are different, update the loraModem.h file to reflect these settings.
|
||||
1: HALLARD
|
||||
2: COMRESULT pin out
|
||||
3: ESP32 pin out
|
||||
4: Other, define your own in loraModem.h
|
||||
|
||||
\#define _PIN_OUT 1
|
||||
|
||||
|
||||
### Forcing a SPIFF format at startup
|
||||
|
||||
The following parameter shoudl be set to 0 under normal circumstances.
|
||||
It does allow the system to foce formatting of the SPIFFS filesystem.
|
||||
|
||||
\#define SPIFF_FORMAT 0
|
||||
|
||||
### Setting Spreading Factor
|
||||
|
||||
Set the _SPREADING factor to the desired SF7, SF8 - SF12 value.
|
||||
|
@ -190,6 +213,10 @@ communication you are stronly discouvared using one of these as they will not wo
|
|||
Instead choose a OLED solution that works over I2C.
|
||||
|
||||
\#define OLED 1
|
||||
|
||||
The following values are defined for OLED:
|
||||
1. 0.9 inch OLED screen for I2C bus
|
||||
2. 1.1 inch OLED screen for I2C bus
|
||||
|
||||
Setting the I2C SDA/SCL pins is done in the ESP-sc-gway.h file right after the #define of OLED.
|
||||
Standard the ESP8266 uses pins D1 and D2 for the I2C bus SCL and SDA lines but these can be changed by the user.
|
||||
|
|
Ładowanie…
Reference in New Issue