Formatting

Software/README.md

@@ -1,28 +1,28 @@
 THIS CODE IS NOT FULLY TESTED.  
 ONLY USE IT IF YOU WANT TO HELP IN THE DEBUG PROCESS.  
-<hr />
+
 <h1>Installation</h1>
 
 <hr />
-<ol>
 
 <h2>ESP32 Interface</h2>
-<hr />
-<ol>
+
 <h3>Download the github EQMOD-ETX and configure</h3>
+<ul>
 <li>https://github.com/ozarchie/EQMOD-ETX/tree/master/Software</li>
 <li>Make sure you have the espressif ESP32 system and libraries installed.    
 [Download ESP32](https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/windows.md)</li>
-<li>Compile and upload to your hardware</li>  
-
-<ol>
-
+<li>Compile and upload to your hardware</li> 
+</ul> 
+<hr />
 <h2>SYNSCAN</h2>
+<hr />
 <h3>Run on Windows - ASCOM only supports Windows</h3>
+<ul>
 <li>Download and install Synscan Appn (Windows)</li>
-[Download SynScan](http://skywatcher.com/download/software/synscan-app/ "Title")  
+[Download SynScan App](http://skywatcher.com/download/software/synscan-app/)  
 <li>Download and install ASCOM driver for Synscan (Windows) to interface to CdC (or other ASCOM-based program)</li>
-[Download SynScan ASCOM](http://skywatcher.com/download/software/ascom-driver/ "Title")
+[Download SynScan ASCOM](http://skywatcher.com/download/software/ascom-driver/)
 <li>Search and join WiFi network EQMODWiFi, Password is CShillit0</li>
 <li>Start SynScan and press Connect</li>
 <li>Select EQ6</li>
@@ -30,22 +30,29 @@ ONLY USE IT IF YOU WANT TO HELP IN THE DEBUG PROCESS.
 <li>Telescope>TelescopeSettings>Telescope: Check ASCOM</li>
 <li>Telescope>ConnectTelescope>Select:SynScanMobile Telescope</li>
 <li>Telescope>ConnectTelescope>Connect</li>  
-
+</ul>
+<hr />
 <h3>Run using phone or tablet App</h3>
+<ul>
 <li>Download and install Synscan Appn (iOS/Android)</li>
-[Download SynScan](http://skywatcher.com/download/software/synscan-app/ "Title")
+[Download SynScan App](http://skywatcher.com/download/software/synscan-app/)
 <li>Search and join WiFi network EQMODWiFi, Password is CShillit0</li>
 <li>Start SynScan and press Connect</li>
-<h2>EQMOD</h2>
-EQMOD does not support WiFi communications natively.  
+</ul>
+<hr />
+<h2>EQMOD</h2>  
 
-It needs a Serial<->WiFi bridge.  
+**EQMOD does not support WiFi communications natively.**  
+
+**It needs a Serial<->WiFi bridge.**  
 
 If you want to use EQMOD, you need to build the  
-<li> [EQMOD-WiFi](https://github.com/ozarchie/EQMOD-WiFi)  
+<ul>
+<li> [EQMOD-WiFi Project](https://github.com/ozarchie/EQMOD-WiFi  "Title")  
  
     interface and code.  
 </li>
 <li>Plug the EQMOD-WiFi device into a USB port</li>
 <li>Configure CdC/EQMOD to use the USB serial port associated with the EQMOD-WiFi</li>
 <li>The EQMOD-WiFi and EQMOD-ETX will handle the WiFi communications using ESP-NOW</li>
+</ul>