mirror
/
Arduino-RFM69HCW-GPS
kopia lustrzana https://github.com/SnkMtn000/Arduino-RFM69HCW-GPS
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Update README.md

master
SnkMtn000 2018-01-29 17:27:06 -05:00 zatwierdzone przez GitHub
rodzic 3cfbe6f2d2
commit 52cd3c0640
Nie znaleziono w bazie danych klucza dla tego podpisu
ID klucza GPG: 4AEE18F83AFDEB23
1 zmienionych plików z 2 dodań i 2 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

4
README.md
Wyświetl plik

@ -4,7 +4,7 @@ I stand on the shoulder of giants.
My code/sketches are built on previously shared code by three other contributers. They are noted at the top at each arduino sketch.
Supported board I created and shared at: https://oshpark.com/shared_projects/vCLw90ht
Supported board I created and shared at: https://oshpark.com/shared_projects/vCLw90ht I drive everything, promini33, rfm69hcw and GPS, from the pro-mini 3.3v requlator with success from a 9vdc battery, but canot not recommend this. I'm using a Ublox NEO-6 GPS Module with great success. Take care of the ceramic antenna. It is a brick dangling on a thread and when the center conductor breaks fails to work. I've repaird my by stripping back the thin coax and making a very tiny light weight and high gain 1.5 GHz ground plane antenna.
These sketches may also work with the adafruit feather M0 with the noted pin changes. I do not have one and could not test.
@ -12,6 +12,6 @@ Three modes supported, Morse, Feld Hell, and RTTY 5N1 170Hz.
Three sketches per mode. 1) a keyboard input mode, a raw beacon mode, and one that transmits GPS telemetry.
Good luck.
73 KC1ENN aka SnkMtn000