diff --git a/qst2_promini33_rfm69_FELD_HELL_Beacon_20180121.ino b/promini33_rfm69_FELD_HELL_Beacon_20180121.ino
similarity index 94%
rename from qst2_promini33_rfm69_FELD_HELL_Beacon_20180121.ino
rename to promini33_rfm69_FELD_HELL_Beacon_20180121.ino
index b150134..a36e448 100644
--- a/qst2_promini33_rfm69_FELD_HELL_Beacon_20180121.ino
+++ b/promini33_rfm69_FELD_HELL_Beacon_20180121.ino
@@ -1,225 +1,225 @@
-/*
- * A simple GPS Feld Hell Beacon sender
- * for the HopeRF rfm69hcw
- * on a ProMini 3.3
- * Charles Webb
- * KC1ENN@arrl.net
- * 
- * with thanks to James Coxon
- * 
- * Feld Hell for HopeRF rfm69hcw modifed from source below
- * https://github.com/jamescoxon/PicoAtlas/blob/master/Pico6MK3/sketch_apr02b/sketch_apr02b.ino
- * 
- * 
- */
-
-#include <SPI.h>
-
-#define MY_DELAY 5000  // delay in loop, between sending the message
-//#define POWER 0x50 // -2 dBm
-///#define POWER 0x52  // 0 dBm
-//#define POWER 0x55  //  3 dBm
-//#define POWER 0x58  // 6 dBm
-//#define POWER 0x5B  //  9 dBm
-//#define POWER 0x5E  // 12 dBm
-#define POWER 0x7F  // 17 dBm
-#define ssPin 10  //  SS
-#define rstPin 9 //  reset pin
-#define radioPower 0x7F
-#define myFrequency 433200000
-//#define myFrequency 915000000
-
-unsigned int count = 0;
-char mytext[80];
-String myCallSign = "CALLSIGN/B TEST BEACON";
-String myString = "";
-
-void setup(){
-  Serial.begin(9600);
-  pinMode(ssPin, OUTPUT);
-  pinMode(rstPin, OUTPUT);
-  setupSPI();
-  delay(1000);
-  resetRFM69();
-  delay(1000);
-  setupRFM69();
-}
- 
-void loop(){
-  count++;
-  buildString();
-  myString.toCharArray(mytext,myString.length() + 1);
-  hellsendmsg(mytext);
-  delay(MY_DELAY);
-}
-
-void buildString() {
-  myString = "...";
-  myString += myCallSign;
-  myString += "...";
-  Serial.print("I am sending: "); Serial.println(myString);
-}
-
-void setupRFM69() {
-  writeReg(0x01,0x0C);
-  writeReg(0x02,0x34);  //  Modulation for OOK, Continuous w.o bit synch, OOK, no shaping
-  setFrequency(myFrequency);
-  Serial.print("Frequency set to "); Serial.println(myFrequency);
-  writeReg(0x26,0x07); // CLK off to save power
-}
-
-// set the frequency (in Hz)
-void setFrequency(uint32_t freqHz){
-  freqHz /= 61; // divide down by FSTEP to get FRF
-  writeReg(0x07, freqHz >> 16);
-  writeReg(0x08, freqHz >> 8);
-  writeReg(0x09, freqHz);
-}
-
-void resetRFM69() {
-  digitalWrite(rstPin, HIGH);
-  delay(100);
-  digitalWrite(rstPin, LOW);
-  delay(100);
-}
-
-void printReg(byte data) {
-  Serial.print("Register "); 
-  Serial.print(data); 
-  Serial.print(" = "); 
-  Serial.println(readReg(data), HEX);
-}
-
-void writeReg(uint8_t addr, uint8_t value) {
-  digitalWrite(ssPin,LOW);
-  SPI.transfer(addr | 0x80);
-  SPI.transfer(value);
-  digitalWrite(ssPin, HIGH);
-}
-
-uint8_t readReg(uint8_t addr) {
-  digitalWrite(ssPin, LOW);
-  SPI.transfer(addr & 0x7F);
-  uint8_t regval = SPI.transfer(0);
-  digitalWrite(ssPin, HIGH);
-  return regval;
-}
-
-void setupSPI() {
-  SPI.begin();
-  SPI.setBitOrder(MSBFIRST);
-  SPI.setClockDivider(SPI_CLOCK_DIV4);
-}
-
-//***************Hellschreiber******************
- 
-struct t_htab { char c; int hellpat[5]; } ;
- 
-struct t_htab helltab[] = {
- 
-  {'1', { B00000100, B00000100, B01111100, B00000000, B00000000 } },
-  {'2', { B01001000, B01100100, B01010100, B01001100, B01000000 } },
-  {'3', { B01000100, B01000100, B01010100, B01010100, B00111100 } },
-  {'4', { B00011100, B00010000, B00010000, B01111100, B00010000 } },
-  {'5', { B01000000, B01011100, B01010100, B01010100, B00110100 } },
-  {'6', { B00111100, B01010010, B01001010, B01001000, B00110000 } },
-  {'7', { B01000100, B00100100, B00010100, B00001100, B00000100 } },
-  {'8', { B00111100, B01001010, B01001010, B01001010, B00111100 } },
-  {'9', { B00001100, B01001010, B01001010, B00101010, B00111100 } },
-  {'0', { B00111000, B01100100, B01010100, B01001100, B00111000 } },
-  {'A', { B01111000, B00101100, B00100100, B00101100, B01111000 } },
-  {'B', { B01000100, B01111100, B01010100, B01010100, B00101000 } },
-  {'C', { B00111000, B01101100, B01000100, B01000100, B00101000 } },
-  {'D', { B01000100, B01111100, B01000100, B01000100, B00111000 } },
-  {'E', { B01111100, B01010100, B01010100, B01000100, B01000100 } },
-  {'F', { B01111100, B00010100, B00010100, B00000100, B00000100 } },
-  {'G', { B00111000, B01101100, B01000100, B01010100, B00110100 } },
-  {'H', { B01111100, B00010000, B00010000, B00010000, B01111100 } },
-  {'I', { B00000000, B01000100, B01111100, B01000100, B00000000 } },
-  {'J', { B01100000, B01000000, B01000000, B01000000, B01111100 } },
-  {'K', { B01111100, B00010000, B00111000, B00101000, B01000100 } },
-  {'L', { B01111100, B01000000, B01000000, B01000000, B01000000 } },
-  {'M', { B01111100, B00001000, B00010000, B00001000, B01111100 } },
-  {'N', { B01111100, B00000100, B00001000, B00010000, B01111100 } },
-  {'O', { B00111000, B01000100, B01000100, B01000100, B00111000 } },
-  {'P', { B01000100, B01111100, B01010100, B00010100, B00011000 } },
-  {'Q', { B00111000, B01000100, B01100100, B11000100, B10111000 } },
-  {'R', { B01111100, B00010100, B00010100, B00110100, B01011000 } },
-  {'S', { B01011000, B01010100, B01010100, B01010100, B00100100 } },
-  {'T', { B00000100, B00000100, B01111100, B00000100, B00000100 } },
-  {'U', { B01111100, B01000000, B01000000, B01000000, B01111100 } },
-  {'V', { B01111100, B00100000, B00010000, B00001000, B00000100 } },
-  {'W', { B01111100, B01100000, B01111100, B01000000, B01111100 } },
-  {'X', { B01000100, B00101000, B00010000, B00101000, B01000100 } },
-  {'Y', { B00000100, B00001000, B01110000, B00001000, B00000100 } },
-  {'Z', { B01000100, B01100100, B01010100, B01001100, B01100100 } },
-  {'.', { B01000000, B01000000, B00000000, B00000000, B00000000 } },
-  {',', { B10000000, B10100000, B01100000, B00000000, B00000000 } },
-  {'/', { B01000000, B00100000, B00010000, B00001000, B00000100 } },
-  {'*', { B00000000, B00000000, B00000100, B00001110, B00000100 } }
- 
-};
- 
-#define N_HELL  (sizeof(helltab)/sizeof(helltab[0]))
- 
-void helldelay() {
-  //Slow Hell
-  //delay(64);
-  //delayMicroseconds(900);
- 
-  //Feld-Hell
-  delay(8);  //  was 8 and hands off
-  delayMicroseconds(100);  // was 160  used to adjust slope of displayed text
-}
- 
-void on() {
-  writeReg(0x11,radioPower); // PA On
-  helldelay();
-  writeReg(0x11,0x00);
-}
-
-void hellsend(char c) {
-  int i ;
-  if (c == ' ') {
-      for (int d=0; d<14; d++){
-        helldelay();  
-      }
-    return ;
-  }
-  for (i=0; i<N_HELL; i++) {
-    if (helltab[i].c == c) {
-      //Serial.print(helltab[i].c) ;
- 
-      for (int j=0; j<=4; j++) 
-      {
-        byte mask = B10000000;
-        for (int q=0; q<=6; q++)
-        {      
-          if(helltab[i].hellpat[j] & mask) {
-            on();
-          } else {
-            helldelay();
-          }
-          mask >>= 1;
-        }
-      }
-      for (int d=0; d<14; d++){
-        helldelay();  
-      }
-      return ;
-    }
-  }
-  /* if we drop off the end, then we send a space */
-  //Serial.print("?") ;
-}
- 
-void hellsendmsg(char *str) {
-  //flag = 1;
-  delay(1000);
-  while (*str)
-    hellsend(*str++) ;
-  //Serial.println("");
-  //flag = 0;
-}
-
+/*
+ * A simple GPS Feld Hell Beacon sender
+ * for the HopeRF rfm69hcw
+ * on a ProMini 3.3
+ * Charles Webb
+ * KC1ENN@arrl.net
+ * 
+ * with thanks to James Coxon
+ * 
+ * Feld Hell for HopeRF rfm69hcw modifed from source below
+ * https://github.com/jamescoxon/PicoAtlas/blob/master/Pico6MK3/sketch_apr02b/sketch_apr02b.ino
+ * 
+ * 
+ */
+
+#include <SPI.h>
+
+#define MY_DELAY 5000  // delay in loop, between sending the message
+//#define POWER 0x50 // -2 dBm
+///#define POWER 0x52  // 0 dBm
+//#define POWER 0x55  //  3 dBm
+//#define POWER 0x58  // 6 dBm
+//#define POWER 0x5B  //  9 dBm
+//#define POWER 0x5E  // 12 dBm
+#define POWER 0x7F  // 17 dBm
+#define ssPin 10  //  SS
+#define rstPin 9 //  reset pin
+#define MODULATION 0x48  //  Modulation for OOK, Continuous w.o bit synch, OOK, no shaping
+#define myFrequency 433200000
+//#define myFrequency 915000000
+
+unsigned int count = 0;
+char mytext[80];
+String myCallSign = "CALLSIGN/B TEST BEACON";
+String myString = "";
+
+void setup(){
+  Serial.begin(9600);
+  pinMode(ssPin, OUTPUT);
+  pinMode(rstPin, OUTPUT);
+  setupSPI();
+  delay(1000);
+  resetRFM69();
+  delay(1000);
+  setupRFM69();
+}
+ 
+void loop(){
+  count++;
+  buildString();
+  myString.toCharArray(mytext,myString.length() + 1);
+  hellsendmsg(mytext);
+  delay(MY_DELAY);
+}
+
+void buildString() {
+  myString = "...";
+  myString += myCallSign;
+  myString += "...";
+  Serial.print("I am sending: "); Serial.println(myString);
+}
+
+void setupRFM69() {
+  writeReg(0x01,0x0C);
+  writeReg(0x02,MODULATION);  
+  setFrequency(myFrequency);
+  Serial.print("Frequency set to "); Serial.println(myFrequency);
+  writeReg(0x26,0x07); // CLK off to save power
+}
+
+// set the frequency (in Hz)
+void setFrequency(uint32_t freqHz){
+  freqHz /= 61; // divide down by FSTEP to get FRF
+  writeReg(0x07, freqHz >> 16);
+  writeReg(0x08, freqHz >> 8);
+  writeReg(0x09, freqHz);
+}
+
+void resetRFM69() {
+  digitalWrite(rstPin, HIGH);
+  delay(100);
+  digitalWrite(rstPin, LOW);
+  delay(100);
+}
+
+void printReg(byte data) {
+  Serial.print("Register "); 
+  Serial.print(data); 
+  Serial.print(" = "); 
+  Serial.println(readReg(data), HEX);
+}
+
+void writeReg(uint8_t addr, uint8_t value) {
+  digitalWrite(ssPin,LOW);
+  SPI.transfer(addr | 0x80);
+  SPI.transfer(value);
+  digitalWrite(ssPin, HIGH);
+}
+
+uint8_t readReg(uint8_t addr) {
+  digitalWrite(ssPin, LOW);
+  SPI.transfer(addr & 0x7F);
+  uint8_t regval = SPI.transfer(0);
+  digitalWrite(ssPin, HIGH);
+  return regval;
+}
+
+void setupSPI() {
+  SPI.begin();
+  SPI.setBitOrder(MSBFIRST);
+  SPI.setClockDivider(SPI_CLOCK_DIV4);
+}
+
+//***************Hellschreiber******************
+ 
+struct t_htab { char c; int hellpat[5]; } ;
+ 
+struct t_htab helltab[] = {
+ 
+  {'1', { B00000100, B00000100, B01111100, B00000000, B00000000 } },
+  {'2', { B01001000, B01100100, B01010100, B01001100, B01000000 } },
+  {'3', { B01000100, B01000100, B01010100, B01010100, B00111100 } },
+  {'4', { B00011100, B00010000, B00010000, B01111100, B00010000 } },
+  {'5', { B01000000, B01011100, B01010100, B01010100, B00110100 } },
+  {'6', { B00111100, B01010010, B01001010, B01001000, B00110000 } },
+  {'7', { B01000100, B00100100, B00010100, B00001100, B00000100 } },
+  {'8', { B00111100, B01001010, B01001010, B01001010, B00111100 } },
+  {'9', { B00001100, B01001010, B01001010, B00101010, B00111100 } },
+  {'0', { B00111000, B01100100, B01010100, B01001100, B00111000 } },
+  {'A', { B01111000, B00101100, B00100100, B00101100, B01111000 } },
+  {'B', { B01000100, B01111100, B01010100, B01010100, B00101000 } },
+  {'C', { B00111000, B01101100, B01000100, B01000100, B00101000 } },
+  {'D', { B01000100, B01111100, B01000100, B01000100, B00111000 } },
+  {'E', { B01111100, B01010100, B01010100, B01000100, B01000100 } },
+  {'F', { B01111100, B00010100, B00010100, B00000100, B00000100 } },
+  {'G', { B00111000, B01101100, B01000100, B01010100, B00110100 } },
+  {'H', { B01111100, B00010000, B00010000, B00010000, B01111100 } },
+  {'I', { B00000000, B01000100, B01111100, B01000100, B00000000 } },
+  {'J', { B01100000, B01000000, B01000000, B01000000, B01111100 } },
+  {'K', { B01111100, B00010000, B00111000, B00101000, B01000100 } },
+  {'L', { B01111100, B01000000, B01000000, B01000000, B01000000 } },
+  {'M', { B01111100, B00001000, B00010000, B00001000, B01111100 } },
+  {'N', { B01111100, B00000100, B00001000, B00010000, B01111100 } },
+  {'O', { B00111000, B01000100, B01000100, B01000100, B00111000 } },
+  {'P', { B01000100, B01111100, B01010100, B00010100, B00011000 } },
+  {'Q', { B00111000, B01000100, B01100100, B11000100, B10111000 } },
+  {'R', { B01111100, B00010100, B00010100, B00110100, B01011000 } },
+  {'S', { B01011000, B01010100, B01010100, B01010100, B00100100 } },
+  {'T', { B00000100, B00000100, B01111100, B00000100, B00000100 } },
+  {'U', { B01111100, B01000000, B01000000, B01000000, B01111100 } },
+  {'V', { B01111100, B00100000, B00010000, B00001000, B00000100 } },
+  {'W', { B01111100, B01100000, B01111100, B01000000, B01111100 } },
+  {'X', { B01000100, B00101000, B00010000, B00101000, B01000100 } },
+  {'Y', { B00000100, B00001000, B01110000, B00001000, B00000100 } },
+  {'Z', { B01000100, B01100100, B01010100, B01001100, B01100100 } },
+  {'.', { B01000000, B01000000, B00000000, B00000000, B00000000 } },
+  {',', { B10000000, B10100000, B01100000, B00000000, B00000000 } },
+  {'/', { B01000000, B00100000, B00010000, B00001000, B00000100 } },
+  {'*', { B00000000, B00000000, B00000100, B00001110, B00000100 } }
+ 
+};
+ 
+#define N_HELL  (sizeof(helltab)/sizeof(helltab[0]))
+ 
+void helldelay() {
+  //Slow Hell
+  //delay(64);
+  //delayMicroseconds(900);
+ 
+  //Feld-Hell
+  delay(8);  //  was 8 and hands off
+  delayMicroseconds(100);  // was 160  used to adjust slope of displayed text
+}
+ 
+void on() {
+  writeReg(0x11,radioPower); // PA On
+  helldelay();
+  writeReg(0x11,0x00);
+}
+
+void hellsend(char c) {
+  int i ;
+  if (c == ' ') {
+      for (int d=0; d<14; d++){
+        helldelay();  
+      }
+    return ;
+  }
+  for (i=0; i<N_HELL; i++) {
+    if (helltab[i].c == c) {
+      //Serial.print(helltab[i].c) ;
+ 
+      for (int j=0; j<=4; j++) 
+      {
+        byte mask = B10000000;
+        for (int q=0; q<=6; q++)
+        {      
+          if(helltab[i].hellpat[j] & mask) {
+            on();
+          } else {
+            helldelay();
+          }
+          mask >>= 1;
+        }
+      }
+      for (int d=0; d<14; d++){
+        helldelay();  
+      }
+      return ;
+    }
+  }
+  /* if we drop off the end, then we send a space */
+  //Serial.print("?") ;
+}
+ 
+void hellsendmsg(char *str) {
+  //flag = 1;
+  delay(1000);
+  while (*str)
+    hellsend(*str++) ;
+  //Serial.println("");
+  //flag = 0;
+}
+