AirScout/CATCheck/Rigs/TH-F6A.ini

208 wiersze
3.9 KiB
INI

;-------------------------------------------------------------------------------
; Kenwood TH-F6A command set
;
; File created by N6TV
;
; Requires Kenwood PG-4Y Interface Cable
; Use the following settings for the radio's COM port:
; 9600,8,N,1
; RTS: Handshake
; DTR: High
; Reference: http://www.radiomanual.info/schemi/Kenwood_TH-F6_TH-F7_protocol.pdf
;
; Note: For use with Faros (http://dxatlas.com/faros):
; Build a special cable for the speaker output
; (see http://www.radioctl.com/english/THF6F7Cable.html)
; Set Faros CW pitch to 1000 Hz
; Comment out both the [pmVfoA] and [pmVfoB] sections to prevent Faros
; from switching the receiver to VFO A (which is VHF only)
;-------------------------------------------------------------------------------
;-------------------------------------------------------------------------------
; initialize
;-------------------------------------------------------------------------------
[INIT1]
; Send a CR to initialize
Command=0D
ReplyEnd=0D
[INIT2]
; Set band control to VFO A
; BC 0
Command=424320300D
ReplyEnd=0D
[INIT3]
; Select VFO mode on VFO A instead of MR mode (enables direct freq entry)
; VMC 0,0
Command=564D4320302C300D
ReplyEnd=0D
[INIT4]
; Set band control to VFO B
; BC 1
Command=424320310D
ReplyEnd=0D
[INIT5]
; Select VFO mode on VFO B instead of MR mode (enables direct freq entry)
; VMC 1,0
Command=564D4320312C300D
ReplyEnd=0D
;-------------------------------------------------------------------------------
; set frequency
;-------------------------------------------------------------------------------
[pmFreqA]
;not supported
[pmFreqB]
;not supported
[pmFreq]
; FQ ...........,0
Command=465120.0000000000000000000000.2C300D
Value=3|11|vfText|1|0
ReplyEnd=0D
[pmRitOffset]
;not supported
[pmRit0]
;not supported
[pmPitch]
;not supported
;-------------------------------------------------------------------------------
; set rit/xit/split/rx/tx
;-------------------------------------------------------------------------------
[pmSplitOn]
;not supported
[pmSplitOff]
;not supported
[pmVfoA]
; BC 0
Command=424320300D
ReplyEnd=0D
[pmVfoB]
; BC 1
Command=424320310D
ReplyEnd=0D
[pmVfoEqual]
;not supported
[pmVfoSwap]
;not supported
[pmVfoAA]
;not supported
[pmVfoAB]
;not supported
[pmVfoBA]
;not supported
[pmVfoBB]
;not supported
[pmRitOn]
;not supported
[pmRitOff]
;not supported
[pmXitOn]
;not supported
[pmXitOff]
;not supported
[pmRx]
; RX
Command=52580D
ReplyEnd=0D
[pmTx]
; TX
Command=54580D
ReplyEnd=0D
;-------------------------------------------------------------------------------
; set mode
;-------------------------------------------------------------------------------
[pmCW_U]
; MD 5
Command=4D4420350D
ReplyEnd=0D
[pmCW_L]
; MD 5
Command=4D4420350D
ReplyEnd=0D
[pmSSB_U]
; MD 4
Command=4D4420340D
ReplyEnd=0D
[pmSSB_L]
; MD 3
Command=4D4420330D
ReplyEnd=0D
[pmDIG_U]
;not supported
[pmDIG_L]
;not supported
[pmAM]
; MD 2
Command=4D4420320D
ReplyEnd=0D
[pmFM]
; MD 0
Command=4D4420000D
ReplyEnd=0D
;-------------------------------------------------------------------------------
; read status
;-------------------------------------------------------------------------------
[STATUS1]
; MD
Command=4D440D
ReplyEnd=0D
Validate=4D4420.00.0D
Flag1=000000.FF.00|000000.30.00|pmFM
Flag2=000000.FF.00|000000.31.00|pmFM
Flag3=000000.FF.00|000000.32.00|pmAM
Flag4=000000.FF.00|000000.33.00|pmSSB_L
Flag5=000000.FF.00|000000.34.00|pmSSB_U
Flag6=000000.FF.00|000000.35.00|pmCW_L
[STATUS2]
; BC
Command=42430D
ReplyEnd=0D
Validate=424320.00.0D
Flag1=000000.FF.00|000000.30.00|pmVfoA
Flag2=000000.FF.00|000000.31.00|pmVfoB
[STATUS3]
; FQ
Command=46510D
ReplyEnd=0D
Validate=465120.0000000000000000000000.2C000D
Value=3|11|vfText|1|0|pmFreq